XP Metal Detectors Adventis 2 Instruction Manual - page 7

6 

A S S E M B L Y  

To hold the cable along the telescopic stem you can use 

Velcro® strip as shown on the photo below(C & D). 

Option 2 : Electronic box hipmounted  

Insert the control box into the hipmount bag. 

Then insert the connector (female) in its panel  

connector (male) and screw it. 

L 

Removal of control box 

To remove the control box from the armrest, proceed 

as indicated below. 

Put your hands around the control box and press slightly  

with your thumbs on the side of the armrest (1). 

Whilst you keep the pressure on, slip the armrest off, 

and remove completely the control box from the 

armrest (2). 

The hipmount bag provided with your detector can allow you to 

protect your detector from rain when the electronic box is fixed on 

the armrest. 

3