XP Metal Detectors Gmaxx II Instruction Manual - page 16
C O N T R O L S
5
If you are working WITH A PARTNER without the WS1 headphones:
you can use FREQ. SHIFT.
9
on the middle setting: DETECT Freq1 / WS1 OFF position on
YOUR device.
9
on a high setting: DETECT Freq 2 / WS1 CH1 position on your
partner's device, even if they are not using a wireless WS1
headset.
If you are working WITH A PARTNER, with the wireless WS1 headphones:
you can use FREQ. SHIFT
9
on a low setting: DETECT Freq 1 / WS1 CH2 position for YOUR
device
9
on a high setting: DETECT Freq 2 / WS1 CH1 position for your
partner's device.
In any event, please refer to the wireless WS1 2 Channel
headphones user manual before use.
IRON
LEVEL____________________________
This control allows you to adjust the audio
level of the low tone (iron signals).
•
Min. = iron detection is
deactivated.
•
Max. = the low tone (iron object)
will have an equivalent level to the Medium/High tones.
•
Intermediate levels will allow you to adapt to the various
ground conditions.
15