XP Metal Detectors GOLD MAXX Power Instruction Manual - page 14
C O N T R O L S
5
SILENCER________________________________
The silencer can limit false signals caused by iron. Use
position I or II if you desired a quieter search. Silencer in
position II will allow to get used to Gold Maxx Power
faster and will improve iron rejection.
0 : Silencer OFF
I : Silencer (advised position)
II : Silencer X 2
Silencer in position O or I will enable you to find the decent targets
which are close to ferrous targets.
Position I or II is also a very useful setting in the Multi-Tone mode,
since it increases the detector's ability in the detection of ferrous
objects and reduces its differences between low and medium pitches.
By default, the Gold Maxx Power is a triple-tone
detector, but users can set it to double tone
mode using a SILENCER switch:
Switch the SILENCER from position I to position II twice
within the space of two seconds. Your machine will
then be in Double-Tone LOW / MEDIUM mode, or in
MEDIUM Mono-Tone mode if the IRON THRESHOLD
potentiometer is set at minimum.
13