XPaket USB 2.0 Firewire Quick Manual - Usb 2.0 Model

Page of 8

Download

Print this page

Bookmark us

USB 2.0 model

To use the XPaket Storage Device USB 2.0, it is required to have an available USB

port and your operating system needs to support the USB interface (i.e., Win-

dows 98SE, Windows ME, Windows 2000, Windows XP or Mac OS 8.0 or later).

If you do not have an available USB port, you may purchase and use a USB 2.0

PCI add-on card. Normally, this provides 2-4 USB 2.0 ports.

XPaket Storage Device USB 2.0 included

5,25” enclosure: to install a 5,25” CD-ROM/CD-RW/DVD drive internally

DC adapter: to power up the 5,25” XPaket Storage Device

USB cable: to connect the XPaket Storage Device to computer

FireWire IEEE 1394 model

To use XPaket Storage Device FireWire IEEE 1394, the computer is required to

have an FireWire IEEE 1394 port and your operating system needs to support the

FireWire IEEE 1394 interface (i.e., Windows 98SE, Windows ME, Windows 2000,

Windows XP or Mac OS 8.0 or later). If your computer main board, etc does not

have FireWire IEEE 1394 port, you may purchase and use a Firewire PCI card.

Normally, these cards provide 2 FireWire IEEE 1394 ports.

XPaket Storage Device FireWire IEEE 1394 included

5,25” enclosure: to install a 5,25” CD-ROM/CD-RW/DVD drive internally

DC adapter: to power up the 5,25” XPaket Storage Device

Firewire cable: to connect XPaket Storage Device to computer

XPaket Storage Device USB 2.0/ Firewire IEEE 1394 Combo version

To use XPaket Storage Device USB 2.0/ Firewire IEEE 1394, the computer must

have available either a USB 2.0 or an FireWire IEEE 1394 port. This model sup-

ports both of the interfaces, permitting increased flexibility between different

computers with different interfaces. The operating system is required to support

the USB 2.0 and/or FireWire IEEE 1394 interface (i.e., Windows 98SE, Windows

« ‹ Prev 1 2 3 4 5 6 7 Next › »

Summary of USB 2.0 Firewire

Page 1
Quick guide 5,25” cd-rom/cd-rw/dvd xpacket storage device.
Page 2: Xpacket Storage Device
Quick guide 5,25” cd-rom/cd-rw/dvd xpacket storage device introduction xpaket storage device xpaket storage device 5,25” cd-rom/dvd drive kit supports all types of 5,25” devices such as cd-rom drive, cd-rw, dvd, dvd-r, dvd-rw. It is intended to be used externally with a computer via a usb 2.0 or fir...
Page 3: Usb 2.0 Model
Usb 2.0 model to use the xpaket storage device usb 2.0, it is required to have an available usb port and your operating system needs to support the usb interface (i.E., win- dows 98se, windows me, windows 2000, windows xp or mac os 8.0 or later). If you do not have an available usb port, you may pur...
Page 4: Drive
Me, windows 2000, windows xp or mac os 8.0 or later). If you do not have an available firewire ieee 1394 or usb 2.0 port on your main board, etc, you may purchase and use add-on cards. Xpaket storage device usb 2.0/ firewire ieee 1394 included 5,25” enclosure: to install 5,25” cd-rom/cd-rw/dvd drive...
Page 5
2. Place the drive inside the enclosure aligned with screw holes and tighten screws, etc. 3. Install the push-push-lock cap. Connect the 40-pin ide connector, power connector, and speaker connector from xpaket storage device to the cd-rom or dvd drive or other 5,25” format devices.. 4. Reinstall the...
Page 6
6. Make sure the computer is powered on and close all windows in preparation for new hardware recognition by the operating system. 7. Connect dc-adapter to xpaket storage device and make sure the power switch is off. Press o to switch off, press i to switch on. Connect the power cord to the power so...
Page 7: Firewire Connection
Firewire connection following the step 1-8. 9. Connect firewire ieee 1394 cable to the firewire port on both xpaket storage device and the computer. 10. Make sure the computer is powered on and close all windows in preparation for new hardware recognition. 11. Connect dc-adapter to xpaket storage de...
Page 8
Trouble shooting the installation double check all cable connections. Leave the xpaket storage device power on and reboot the computer. Try another usb or firewire ieee 1394 port for connection. Use the usb or firewire ieee 1394 port provided directly from the motherboard. Ensure the usb port or fir...