Dx100br (92997aw) dx100bs (93017aw) dx100btr (92998aw) dx100bts (93018aw) dx100bhtr (92999aw) dx100bhts (93019aw) dx100bhptr (93000aw) dx100bhpts (93020aw) dx100bpr (93001aw) dx100bps (93002aw) xpelair simply silent dx100b ™ installation and maintenance instructions english ُ ِ ََ.
• do read the entire instruction leaflet before commencing installation. • do install each fan with a means for disconnection in all poles in the fixed wiring. • do make sure the mains supply is switched off before attempting to make electrical connections or carry out any maintenance or cleaning. •...
This appliance is intended for connection to fixed wiring. Check that the electrical rating shown on each fan matches the mains supply. The appliance is double insulated and does not require an earth connection. All installations must be supervised by a qualified electrician. Installations and wirin...
Overall dimensions (mm) back plate fixing positions a front cover removal b depress cover latch with tool & remove cover complete english important – please read adjusting the humidity setting adjusting the run on timer setting fan switches on at lower level of condensation (anti-clockwise) more sen...
English wiring and setting up d1 dx100br / dx100bs dx11bpr / dx100bps dx100btr / dx100bts see detail b see detail c customer connection terminal detail c scale 2.000 over-run timer detail b scale 2.000 set jumper to required position for speed setting high speed low speed see detail a customer conne...
English wiring and setting up d2 dx100bhtr / dx100bhts dx100bhptr / dx100bhpts see detail f see detail g customer connection terminal see detail d see detail e customer connection terminal detail f scale 2.000 set jumper to required position for speed setting high speed low speed detail d scale 2.00...
English if wall mounting the fan, you will also need: • a 100mm diameter prepared hole. • a simply silent wall kit: sswkwr (92991aw) – round / white sswkws (92992aw) – square / white sswkbr (92993ab) – round / brown sswkbs (92994ab) – square / brown if ceiling mounting the fan, you will also need: •...
Wire the electrical connections. 11. Make sure the mains supply is isolated. Switch off the mains electrical supply and remove fuses. 12. Feed the cable to the terminal block. Wire the fan as shown in figure e using the diagram appropriate to the fan model. 13. Connect the cable from the isolating s...
English using the fan dx100br / dx100bs only • operate the fan using the on/off switch (not supplied). Repeat to switch off. Dx100btr / dx100bts only • operate the fan using an on/off switch (not supplied). Note – the fan may take up to 10 seconds to turn on once the switch has been operated. When t...
English technical advice and service customers outside uk - see international below. United kingdom xpelair have a comprehensive range of services including: • free technical advice help-desk from engineers on all aspects of ventilation. • free design service, quotations and site surveys. • service ...
Part no: 26097aa (revision a) head offi ce, uk sales offi ce and spares redring xpelair group ltd, newcombe house, newcombe way, orton southgate, peterborough, pe2 6se england telephone: +44 (0) 844 372 7761 www.Xpelair.Co.Uk www.Xpelair.Co.Uk/international fm02118 iso 9001: 2000
