Xpelair GX6 EC2 Installation and maintenance instructions manual

Summary of GX6 EC2

  • Page 1

    Guarantee terms and conditions for uk & roi (outside uk & roi contact your local distributor) we, applied energy products limited, guarantee this product for residential use only, for the period of 5 years from the date of purchase subject to the following conditions – initial 3 years parts and labo...

  • Page 2

    2 this page has been left blank for the addition any notes you may wish to make. 11.

  • Page 3

    3. To remove the impeller, unscrew the central screw with a 7mm nut runner and remove it, place the screw to one side. 4. To clean the impeller, either wipe it with a damp, lint free cloth or wash it in warm soapy water. Do not use strong detergents or chemical cleaners.Thoroughly dry the impeller a...

  • Page 4

    4 3. Drill the holes and insert anchor fixings to suit the wall. 4. Screw the outer grille securely in place. Do not over tighten screws. 5. Insert the two screw covers in the two fixing holes in the outer grille. 6a. If wiring from the rear, remove the fan’s terminal cover and rear entry knockout. ...

  • Page 5

    1. Check that there are no buried pipes or cables (eg. Electricity, gas, water) behind the switch location (in the wall or above the ceiling). 2. Lay in the cable from the isolating switch to the fan location via the on/off switch (see fig. E1. For change over switch (cos) see fig. E2. 3. Lay in the...

  • Page 6

    6 xpelair ultra gx6 ec2 & gxc6 ec2 installation and operating instructions please leave this leaflet with the fan, for the benefit of the user. The ultra gx6 models have the following features: • window / wall / panel / roof mounting options. • for remote switch operation. • 2 speed operation when i...