Xpelair SLDC100 Installation And Maintenance Instructions

Summary of SLDC100

  • Page 1

    Do’s and don’ts do read the entire instruction leaflet before commencing installation. Do install each fan with a means for disconnection in all poles in the fixed wiring. Do make sure the mains supply is switched off before attempting to make electrical connections or carry out any maintenance or c...

  • Page 2

    A b c d e sldc100 overall dimensions all fans re-fit the electrical cover. Re-fit the front cover by hooking in the top corners first, and then swing the cover down to fit the bottom corners. Re-fit the screw. Re-fit the fuses and turn on the mains electrical supply. The light may flash several time...

  • Page 3

    Preparing the fan for installation. Remove the front cover by removing the screw from the underside of the cover and pulling off the cover from the bottom corners first. Remove the electrical cover by removing the 2 screws. Mount the fan in the hole. If working above ground floor level, safety preca...

  • Page 4

    Xpelair sldc100 / sldc100p / sldc100t / sldc100ht / sldc100pir slimline range of toilet/bathroom fans with ultra dc motors installation and operating instructions. Please leave this leaflet with the fan for the benefit of the user. Installing the fan these appliances are intended for connection to f...