Xpelair SLDC150 Installation And Maintenance Instructions

Summary of SLDC150

  • Page 1

    Do’s and don’ts do read the entire instruction leaflet before commencing installation. Do install each fan with a means for disconnection in all poles in the fixed wiring. Do make sure the mains supply is switched off before attempting to make electrical connections or carry out any maintenance or c...

  • Page 2

    C sl150 overall dimensions a b d e note the switch marked 2 above it is a factory set position and should not be changed. For the sldc150 range this switch should be in the down position (the side of the switch marked ‘150mm size’). If this switch is not in the correct position the fan will not achi...

  • Page 3

    Preparing the fan for installation. Remove the front cover by removing the screw from the underside of the cover and pulling off the cover from the bottom corners first. Remove the electrical cover by removing the 2 screws. Mount the fan in the hole. If working above ground floor level, safety preca...

  • Page 4

    Xpelair sldc150 / sldc150p / sldc150t / sldc150ht / sldc150pir slimline range of toilet / bathroom fans with ultra dc motors installation and operating instructions. Please leave this leaflet with the fan for the benefit of the user. Installing the fan. These appliances are intended for connection t...