Xplore DT-08 User Manual - page 10
16
Performing System Restore
To restore the stystem from a backup image:
1. Select
Application drawer > System Backup
2. Select the
Restore button.
3. Select the backup image location from
Backup Loaction drop
down menu.
4. Select the backup image file from the
Restore content menu.
5. Select
Start, and then click OK when prompted.
6. The device reboots automatically upon completing the restore
Note:
• The backup image folder must be placed in the
backup folder.
• When backing up only the data, the image shoulf be restored
on the same firmware version. Restoring on a different firmware
version might create instability or corruption.
Resetting the Device
Soft Reset
Soft reset shuts down and reboots the device. It preserves installed
applications, settings, and saved data.
To perform a soft reset, press and hold the power key for 8 seconds.
Clean Reset
Clean reset restores the system to factory default by erasing all installed
applications, settings and data
To perform a clean reset
1. Select
Application drawer > Settings > Backup & reset.
2. Select
Factory data reset.
Note:
Clean reset will not erase the data in the internal SD card partition.
To erase the internal SD card contents, select
Application drawer >
Settings > Storage > Erase device storage.
Copyright© 2015 Group Sense Mobile-Tech Limited.
All rights reserved.
http://www.gsml.com.hk
Using the Device