XPower B-3 Owner's manual - page 4
Parts List
1
Left Housing
8
Motor
15
Crossed cover
2
Right Housing
9
Motor rubber sleeve
16
Inlet filter
3
Switch
10
Dustproof cover
17
Hose
4
Air outlet grid
11
Motor filter
18
Round groomer rake
5
Motor rubber sleeve
12
Dust case
19
Cone nozzle
6
PCB board
13
Dust case filter
20
Flat nozzle
7
Brush
14
Rear cover
21
Square nozzle
21
20
19
8
18
7
17
3
1
4
5
8
9
10 11
12 13
2
6
- 5 -
14 15
16
Maintenance
Product Maintenance:
1. To keep the Pet Dryer + Vacuum clean, use a damp cloth to wipe the surface of the
housing.
2. Never clean the unit with water.
3. When not in use, unplug and store the Pet Dryer + Vacuum in a dry indoor place and keep
out of reach of children.
4. Always disconnect the Pet Dryer + Vacuum from its power source before performing any
maintenance or cleaning.
Cleaning Dryer Dust Case, Rear Cover and Filters:
The Filter System for the XPOWER Pet Dryer + Vacuum (including dust case, rear cover and
filters) should be kept clean regularly. If the dust case is full of hair and / or dirt or the filters
become heavily coated, the air output and input of your Dryer + Vacuum will reduce and this
can cause damage to the motors or cause the motors to overheat. You should never operate
the dryer without filters in place.
IMPORTANT!
Always turn off the unit and disconnect from electrical outlet before cleaning.
- 6 -
7
Wall Mount shown (optional)