XPower PL-700A Owner's Manual - page 4
- 7 -
- 6 -
Safety Instructions
Maintenance Instructions
Troubleshooting
1. To keep the Low Profile Air Mover clean, use a damp cloth to wipe the surface of the housing.
2. Never clean the Low Profile Air Mover with water.
3. When not in use, unplug and store the Low Profile Air Mover in a dry indoor place out of reach
of children.
4. Always disconnect the Low Profile Air Mover from its power source before cleaning,
disassembly, or servicing,
PROBLEM
POSSIBLE CAUSE
SOLUTION
Low Profile Air Mover not
running
No power input / Switch not
turned on
Check outlet / switch to another
outlet, make sure unit is plugged
in and switch is turned on.
Intake or exhaust blocked
Turn unit off to cool down, then
remove blockage
Fan jammed
Remove material jamming the fan
Wiring failure / Motor Failure
contact XPOWER Customer
Service
Low Profile Air Mover
vibrates / makes noise
Fan jammed / broken
Remove material jamming the
fan or contact XPOWER Customer
Service
10. Always place the Low Profile Air Mover on a smooth and level surface for safe operation.
11. Any misuse or abuse of this product will void its warranty.
12. It's automatically operated device. To reduce the risk of injury disconnect from power supply
before servicing.