Summary of D2.1
Page 1
D2.1 digital 2.1 channel amplifier user guide.
Page 2
2 • explanation of graphical symbols the lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to per...
Page 3: Table of Contents
3 table of contents important safety instructions ..................................................................................................2 introduction ................................................................................................................................ 4 featur...
Page 4: Introduction
4 introduction congratulations and thank you for purchasing the xpress d2.1, digital 2.1 channel audio amplifier! The compact size and advanced design of the d2.1 deliver a whole lot more than just great, powerful, clear audio in a small package. The d2.1 delivers a true 50 watts at 8 ohms, making i...
Page 5: Features
5 features • compact size...Fits almost anywhere • cool, efficient digital design • stereo audio line level input (rca) • digital optical audio input • bluetooth compatible (audio and control) • line level subwoofer output (rca) • 5vdc power supply output for xpress accessories • 10 band graphic eq ...
Page 6: D2.1 Inputs & Outputs
6 d2.1 inputs & outputs these connectors connect things to the d2.1...Some actually do some other stuff too... 100-240v-50/60hz 2.5a status receiver in line in l r sub out optical in l- l+ r- r+ usb 1 3 4 5 6 7 8 9 2 1. Ac power terminal (100-240v-50/60hz 2.5a) - universal power connector. Automat- ...
Page 7: D2.1 Side Vents
7 7. Receiver in - rj45 connector. Allows connection of the xpress bluetooth streaming audio/setup module. Allows setup of the d2.1 via d2.1 setup app and bluetooth module. Also allows ir control of a connected bluetooth streaming device via the xpress bluetooth module, using the d2.1 ir remote or o...
Page 8: D2.1 Ir Remote
8 d2.1 ir remote push the buttons...Stuff happens... 1. Power - toggle power button. Press once to turn the d2.1 on. Press again to turn the d2.1 off. 2. Eq flat - press to cancel active eq and return all eq settings to neutral (flat). 3. Volume up/down- press ‘+’ to increase volume. (turn it up.) p...
Page 9: Installation
9 installation here’s where you can stick it...And how... D2.1 shelf wood screw wood screw 100-240v-50/60hz 2.5a status receiver in line in l r sub out optical in l- l+ r- r+ usb 100-240v-50/60hz 2.5a status receiver in line in l r sub out optical in l- l+ r- r+ usb shelf mount the d2.1 can be conve...
Page 10: Connections
10 connections all connections are conveniently placed on the side panel for sane wire management, conve- nient connections and simple service. The illustration shows the d2.1 in a typical home entertainment system for tv audio with stereo in ceiling speakers with a subwoofer amp and subwoofer. Inpu...
Page 11: Connections
11 connections note: do not connect the ac power cord or turn the amp on until all connections have been made and confirmed. Making connections with the power on can result in...Well...Undesir- able circumstances...That may not be covered under the factory warranty. Optical in (tv audio connection) ...
Page 12: Operation
12 operation you don’t need to be a brain surgeon to perform these operations... On/off the d2.1 is auto-sensing, so typically once the system is installed and setup, the power will automatically turn on with the presence of an audio signal on either the digital optical in, line in or receiver in. T...
Page 13: Operation
13 operation xpress bluetooth module ok...So you’re one of the really smart people who also purchased the xpress bluetooth module. This device will not only allow you to stream your favorite audio content via bluetooth from almost any current bluetooth device to the d2.1, but it will also allow ir c...
Page 14: Ir Learning
14 ir learning what...You don’t want to have to use more than one remote to control your system??? Wow... Some people!!! Well...If you insist...Here’s what you can do to use a tv or other pre-pro- grammed remote to control the d2.1. (you can also teach the ir commands from the d2.1 ir remote to a pr...
Page 15: Factory Reset
15 mute 1.Press the mute button on the d2.1 ir remote. The status led will flash once and turn off. 2. Press the button on the system remote to be used for mute. 3. The status led should flash twice and turn off. 4. Press the button on the system remote again. The status led will flash once and turn...
Page 16: Specifications
16 specifications audio maximum output power per channel .................................................................................................. 50w thd+n .........................................................................................................................................
Page 17: Limited Warranty
17 limited warranty all in-wall, in-ceiling, outdoor speakers, volume controls, and freestanding loudspeakers have a lifetime limited warranty. This warranty includes lifetime parts and repair on components. Powered subwoofers and xpress amplifiers have a two (2) year limited warranty. This warranty...
Page 18: Notes
18 notes.
Page 19: Notes
19 notes.
Page 20
Beale xpress 122 gayoso street, suite 101 memphis, tn 38103 phone: 844.489.2700 fax: 901.205.0900 www.Bealexpress.Com © 2015 beale street audio d21ug060215 rev 3.