1. DL manuals
  2. Xpresskit
  3. Remote Starter
  4. CHRSALL RS-CHLCD
  5. Owner's Manual

Xpresskit CHRSALL RS-CHLCD Owner's Manual

Manual is about: 2-Way LED & LCD Remote Start Kits

Summary of CHRSALL RS-CHLCD

  • Page 1

    Rs-chled understanding the rs-623 remote................................................................................ Using the rs-623 remote............................................................................................... Listing the available commands.................................

  • Page 2: Using The Rs-623 Remote

    Understanding the rs-623 remote * range based on line of sight, unobstructed testing in ideal conditions. Actual range will vary due to local conditions including but not limited to environment, terrain, physical obstructions, vehicle location and orientation, interference and other possible impedim...

  • Page 3

    Button function lock the doors and arm the factory alarm. Unlock the doors and disarm the factory alarm. Open the trunk. Panic on: press the lock button and hold it for at least 4 seconds. Panic off: press the unlock button. Start the vehicle. Stop the vehicle (hold button for at least 4 seconds). S...

  • Page 4: Rs-Chlcd

    Rs-chlcd page 4 2-way lcd remote start kit with up to 5,000’ of range.* the astrostart rs-chlcd kit is a complete remote start solution, which includes a 2-way lcd transmitter/receiver and an all-in-one mobile integration module. In the kit, you will find: § 1x 5224-rx (antenna). § 1x 5224-tx (2-way...

  • Page 5: Using The Rss-5224 Remote

    To send a command, press the corresponding button for two seconds. The command may not be sent if the button is not pressed long enough. The remote control beeps when a button is pressed, then emits eight short beeps during the transmission, i.E. About one second after the button was pressed. Your r...

  • Page 6

    Function button lock the doors and arm the factory alarm. * unlock the doors and disarm the factory alarm. * ö open the trunk (hold button for at least 4 seconds). Panic on (hold button for at least 4 seconds). Panic off start the vehicle. Stop the vehicle. Ö set car to idle mode when it is already ...

  • Page 7

    Page 7 * commands followed by an asterisk (*) apply only to modules equipped with a security system. ** only accessible with chrysler town & country 2008-2010, dodge grand caravan 2008-2010, and volkswagen routan 2009-2010. Ö this command terminates the runtime, panic mode and alarm status (only if ...

  • Page 8

    Page 8 two types of confirmations are displayed on the remote: command confirmation: these confirmations are command acknoledgement, the icon corresponding to the command is displayed to confirm reception of the command. Status confirmations: these confirmations are displayed when the status of a zo...

  • Page 9: Cold Weather Start Feature

    To activate the cold weather start feature, press the lock and start buttons on the remote control and hold for 4 seconds. Press the lock and start buttons and hold for 4 seconds. Or page 9 out of range: in the event that the environement prevents the confirmation from being received by the remote c...

  • Page 10

    Limited one-year consumer warranty page 10 for a period of one year from the date of purchase of a directed electronics remote start or security product, directed electronics. (“directed”) promises to the original purchaser, to repair or replace with a comparable reconditioned piece, the security or...