Xpresskit PKH34 Installation manual

Summary of PKH34

  • Page 1

    Installation guide model: pkh34 honda / acura transponder data override interface (no key required) transponder pk bypass † honda and acura are registered trademarks and property of their respective companies. Product description pkh34 is a fixed honda and acura transponder data override interface s...

  • Page 2: Wire Side of

    1 6 5 4 3 2 7 ecm side section a system remote control page 1 to 2 red green v iolet black v iolet/white pink pink/white chassis ground brown (-) ground when running (status) input input input (-) (+) (-) ignition (+) input orange n/c n/c n/c (+) security light - ecm side output (+) n/c n/c n/c da t...

  • Page 3: Inst

    Page 2 to 2 legend rcs = remote control system n/c = no connection n/a = not applicable w2w= analogue wire to wire d2d= data 2 data n/c n/c n/c n/c n/c n/c section b (-) /(+) (-) input input input data i/o st a t us wire color brown green blue v iolet/ white vi o le t pink/ white pink orange red bla...

  • Page 4: Installation Notes:

    Data ignition ground acura el 1.7 2001-2005 brown/ yellow pos.#1 acura mdx 2003-2006 acura rsx 2002-2006 vehicle red/blue pos.#2 yellow/ pos.#6 black red/blue pos.#2 red pos.#2 green/white pos.#6 yellow/black pos.#6 brown/ yellow pos.#1 brown/ yellow pos.#1 acura tsx 2003-2008 red/blue pos.#2 black/...

  • Page 5

    Install “b”: honda & acura type “d” transponder data override interface red green v iolet black v iolet/white pink pink/white chassis ground brown (-) ground when running (status) input input input (-) (+) (-) orange n/c n/c n/c n/c n/c n/c n/c n/c n/c n/c n/c n/c da t a data (+)12 v o lt constant w...

  • Page 6

    Section b (-) /(+) (-) input input input data i/o st a t us wire color brown green blue v iolet/ white v iolet pink/ white pink orange red black (-) (+) specific wire connection loca tion constant (+) 12 v o lt source chassis ground connect location v e hicle v ehicle v ehicle activ a tion and/or fu...

  • Page 7

    Install “b”: vehicle programming section d 1) once module has been properly connected, turn key to ignition position, led goes on. 2) after led turns off, module is now programmed. *to reset, press and hold button and plug in module. Led comes on. When led goes off, release button. Install “b”: vehi...

  • Page 8

    Limited one-year consumer warranty for a period of one year from the date of purchase of a directed electronics remote start or security product, directed electronics. (“directed”) promises to the original purchaser, to repair or replace with a comparable reconditioned piece, the security or remote ...