Xqisit B06 User Manual

Getting started:

Please follow these simple steps to start using your mini Bluetooth Speaker:

charging, please remove the cable from the speaker.

• Make sure the mini Bluetooth speaker and your compatible Bluetooth enabled device are no more than 1 metre 

away for the initial pairing process.

• Once paired, there will be a 10 metre Bluetooth sensing distance.

Note:

a) Charge indication: when charge is in process, the charging indicator will be red. When compete, the charging 

b) Low battery indication: you will be promoted with a voice alert “low battery”.

Warning:

Do not charge the speaker with other unsuitable AC/DC power adapters. The speaker must be charged either via 

USB port or by a USB AC/DC adapter.

Input AC100-240V, 50-60Hz 

Output DC 5V 500mA

Press and hold the                  button for 4 seconds. You will hear a voice alert saying “Power on”. The standby 

To pair:

Prior to using your Bluetooth speaker for the 1st time, you must pair it with a 

Bluetooth enabled device. Please follow these simple steps:

b) Place your Bluetooth speaker and device no more than 1 metre apart.

c) Press and hold the                   button for 4 seconds. You will hear a voice alert saying “Power on”.  The standby 

alternately. It is now ready for pairing.

e) Activate your device’s Bluetooth function, and select 

Mini BT Speaker from the search list. Select OK to pair 

the speaker.

f) If required, the pass key is ‘0000’ and press OK.

g) When pairing is complete, you will hear a voice alert “connected”. The speaker is ready for use and in standby 

Speaker functions:

a) Play / Pause music

    You can control via your device, or by pressing the                   button.

b) Adjust the volume

    Press and hold the reduce volume      button or increase volume      button repeatedly to achieve the required 

level.

c) Play next / previous song

    Quick press the      button for previous song, and press      button for the next song.

d) Answer a call

    Wait for the speakerphone to ring, then short press the            button to accept the call, or answer the call on 

your Smartphone in the normal way.

e) End a call

    Short press the           button to end the call, or you can end the call via your smartphone in the normal way.

f) Last number redial:

    When in standby more, short press two times           for last number redial.

• Micro USB 

  charging cable

• Audio jack

• Lanyard

• Function control buttons

• Standby indicator

• Microphone

• Charging indicator

PLAY

PLAY

PLAY

Disconnect the speaker and smartphone:

Press the           button for 5 seconds.

Or disconnect the speaker via the Bluetooth options on your smartphone

Connection with 3.5 mm audio cable:

You can also connect to portable speaker with a 3.5mm audio cable to listen to music if you do not want to use 

Bluetooth. Simply connect the cable to the headphone socket of the audio source, and plug the 3.5mm cable back 

to the speaker.

Maintenance:

a) Do not charge the speaker with other unsuitable AC/DC power adaptors. 

    The speaker should be charged via USB port or by a USB AC/DC adapter with Input: 

    AC 100-240 V, 50-60 Hz

b) Do not expose the speaker to liquid, moisture or humidity.

c)  Do not expose the speaker to high temperature.

d) Do not use abrasive cleaning solvents to clean the speaker.

e) Do not attempt to disassemble the speaker.

Safety Notice:

a) Check local laws regarding use of a mobile handset and speakerphone while driving.

b) Never mount or store over any air bag deployment area.

c)  Not suitable for children as small parts may be a choking hazard.

Trouble Shooting:

If you are unable to connect your speaker and smartphone, please try the following:

a) Ensure your smartphone’s Bluetooth feature is activated

b)Ensure the speaker is within a maximum of 10 metres of your mobile device and there are no obstructions

Signal / Noise ratio: 

> 80 dB                                                  

Driver:  

4 oHm 3 Watt

Rating Power:   

3 W

Line in: 

3.5 mm

Rechargeable battery: 

300 mAH lithium ion

Battery voltage: 

3.7 V

Full charging time: 

3 hours

Talk time: 

3 hours

Standby time:  12 hours

Version 3.0, Class 2, 10 Metres

Power input: 

Micro USB (5 V / 500 mA)

Weight: 

42 g

Dimensions: 

37x34 mm

Voice alert:

Switch on 

“Power On“

Pairing mode   

“Pairing mode“

Devices connected 

“Connected“

Pairing Disconnected 

“Disconnected“

Receive incoming call 

“Call from ...“

Already Max Volume 

“Maximum Volume“

Already Min Volume 

“Minimum Volume“

Re-dial Last call  

“Redial“

Low battery 

“Low battery“

PLAY

PLAY

                                                 B06 Mini Portable Speaker user manual  

Easy to carry around and ideal for travel, you can enjoy your music anywhere 

with your friends. Use as an external speaker for your smartphone, laptop or 

media player.