- DL manuals
- XRPlus
- DVR
- XRS 1000 Series
- User Manual
XRPlus XRS 1000 Series User Manual
Summary of XRS 1000 Series
Page 1
User’s manual xrs 1000 series stand alone type digital video recorder this manual is written based on 1016.
Page 2
User’s manual ( 2 ) chapter 1 specification & system organization 1. Product contents list -------------------------------------------------------- 4 2. System organization --------------------------------------------------------- 5 chapter 2 description 1. Front panel ------------------------------...
Page 3
User’s manual ( 3 ) chapter 5 menu go to menu -------------------------------------------------------------- 13 go to system setup -------------------------------------------------------- 13 1. Display ------------------------------------------------------------------ 14 2. Camera ------------------...
Page 4
User’s manual ( 4 ) 1. Product contents list ① basic contents remote controller remote client program install cd aaa battery x 2 power cable ② option contents hdd specification & organization please confirm the contents when open package. Xrs 1000 series.
Page 5
User’s manual ( 5 ) 2. System organization network camera #1-16 alarm sensor #1-4 relay out vcr vga monitor av monitor remote client pc image printer video in video out tcp/ip alarm input/out remote controller (it is not supported at the xrs 2016) backup avi backup web client usb xrs 1000 series spe...
Page 6
User’s manual ( 6 ) ① power : system power on/off ② led indicator : indicate present system status information. (power, record, network, alarm) ③ usb port: usb port for use the usb memory stick and usb hdd backup. 1. Front panel description ① ② ③ ① ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ⑩ ⑪ ① video in : bnc port for conne...
Page 7
User’s manual ( 7 ) power system on/off menu: open menu return cancel setup or return to previous enter: apply setup change channel selection button (16ch available, #1~4 button) change screen mode open search mode ptz/iris mode • unused button’s description is omitted. • every button is operated sa...
Page 8
User’s manual ( 8 ) check system condition at led power : showing system on/off record : showing record on/off network : showing client connection status 1. System power on • press power button to start system • after checking hard disk, need input password to operation [default password 1234] • ini...
Page 9
User’s manual ( 9 ) 2. Screen division and auto rotation • screen division changes with 'scr mode' button on remote controller • pressing 'scr mode' or 'sequence‘ buttons to see one screen division mode (all the channels on screen with full screen division mode) display auto rotation or full screen ...
Page 10
User’s manual ( 10 ) • each icon mean the button of front keyboard. • control each function by front keyboard. 3. Ptz/focus control • control camera ptz (pan/tilt/zoom) • press ptz button to open ptz menu 4. System power off • press power button to system off • input password and press enter to shut...
Page 11
User’s manual ( 11 ) go to search mode • press search button and log-in administrator or manager • use direction key to move menu • to open each menu press enter • to return to previous press return (move to previous menu or exit search mode and return to watch mode) 1. Search by time - possible to ...
Page 12
User’s manual ( 12 ) • alarm, motion, system can be select plural by check (v)-(enter) • to change setup, press enter and press direction key after changing setup, press enter to exit. • control playing video ※ press normal forward/backward button in pause, move to next/previous frame. 2. Search by ...
Page 13
User’s manual ( 13 ) • initial administrator, manager, user password is 1234. • showing password as * • changing password (system setup->system -> user management ) • only watch mode can go to entering setup. (search & ptz/focus mode can’t move to menu) go to menu ① press setup button ② ask password...
Page 14
User’s manual ( 14 ) 1.Display - video setup for watch mode • status bar : record condition mark on/off (recording: red, pre-recording : green) • camera title: setup camera name to show left-upper side • event icon: indicate the menu location by icon • border : border mark on/off when 4ch division w...
Page 15
User’s manual ( 15 ) • sequence dwell : setup rotation cycle time (1~60 sec.) when 4ch rotation mode at watch mode • spot-out dwell : setup spot-out time cycle (1~60 sec.) to transmit video • de-interlace mode : remove screen spread on high resolution , low frame ※only applying when d1(704x480) • al...
Page 16
User’s manual ( 16 ) • choose add to add sequence • input sequence title • choose activation • save and exit • when input sequence title, you can use virtual keyboard by pressing enter button. Menu.
Page 17
User’s manual ( 17 ) • choose add in the sequence to input title • change activation off to on menu • to add name using mouse or remote controller.
Page 18
User’s manual ( 18 ) • press ‘return’ button on remote controller or ‘cancel’ button on front panel and click ‘save & exit’. Menu • after pressing ‘enter’ button on remote controller or front panel, select screen division using ◀ or ▶ buttons and type in channel number • to modify sequence, click ‘e...
Page 19
User’s manual ( 19 ) 2.Camera - setup camera • covert : setup covert on/off *what’s covert? When covert on watch mode, display video is hidden, but recording is on. • title : setup camera name by virtual keyboard • input the title by “enter” after choose by button. Menu 2-1. Camera title.
Page 20
User’s manual ( 20 ) • control the monitor bright, contrast, color, tint • all setup possible to control 0~100 • setup channel by channel 2-2. Color setup 2-3. Ptz setup • address : select ptz camera address • ptz protocol : select kind of ptz camera • baud rate : setup ptz communication speed (2400...
Page 21
User’s manual ( 21 ) 2-4. Motion sensor • move cursor by direction key and press enter at selected region • choose the partial motion region channel by channel • sensitivity: 1~10 • select all : select entire region • deselect all : cancel region setup • cancel : cancel change setup & exit • save & ...
Page 22
User’s manual ( 22 ) 3. Sound 3-1. Audio • live audio : audio output on/off live audio output from audio in terminal • audio monitoring channel: select channel for audio output nr. 1~4 audio in • network audio tx: choose the audio transmission • network audio rx: choose the audio receive 3-2. Buzzer...
Page 23
User’s manual ( 23 ) • time zone setup : choose the time by gmt standard. ※ how to time setup 1. Setup timezone as your location. 2. Setup the network time server and press the “sync” button. 3. If correct time is not getted automatically, setup the date/time manually. 4. If don’t follow as upper, y...
Page 24
User’s manual ( 24 ) 1. If your network connect at the router, please must port forwarding. 2. Please must enter the exact ip address, dns server, gateway, subnet mask. 3. Please must connect the dvr at external network. If you don't follow 1,2,3 , you can't receive the ddns service. 4-2. Network • ...
Page 25
User’s manual ( 25 ) 4-3. Mail • server: setup the mail server • setup by virtual keyboard after press the “enter” • port: mail server port • security: on/off • user & password: input the dvr login user id and password. Menu 4-4. User management user setup • it is consisted 3 user group as administr...
Page 26
User’s manual ( 26 ) user setup • it is consisted 3 user group as administrator, manager, user. • total 7 user belong to 3 user group can be made. • input user id, password. • choose the group. • input the e-mail address. • it can edit user id information. • e-mail notification on/off • input the e-...
Page 27
User’s manual ( 27 ) 4-5. System information • f/w version: server firmware version • h/w version : hardware version • video signal type: ntsc or pal • disk capacity: used hdd capacity of the total hdd capacity • ip address: dvr’s ip address • mac address: fixed mac address of the dvr menu 4-6. Firm...
Page 28
User’s manual ( 28 ) 4-6. Factory default • press “press” to start initialize. • showing warning message and press ok to run initialize. • if do factory default, every setup is initialized, but saving image is not erase. Menu 4-7. Control device • systmed id : in case of controlling several dvrs wit...
Page 29
User’s manual ( 29 ) menu 5. Event / sensor 5-1. Hdd event • drive: hdd connected location • smart alarm: on/off • check interval: hdd checking time 5-2. Alarm input • operation: setup alarm sensor connection status (enable/disable) • type : setup alarm sensor n/open, n/close type.
Page 30
User’s manual ( 30 ) 5-4. Buzzer out • buzzer on/off • operation: setup buzzer. • mode: setup reacted relay as latched/transparent mode. • hdd event: buzzer on/off when hdd event is happened. • duration: buzzer time(5sec~5min or until key-in) • setup each channel when alarm, video loss, motion are h...
Page 31
User’s manual ( 31 ) 5-5. E-mail notification 6. Disk management • disk overwrite : select overwrite permission when hard disk full on: overwrite hard disk from oldest data off: when hard disk full, stop recording and buzzer activate • format : refreshment hard disk. All recorded data deleted • if t...
Page 32
User’s manual ( 32 ) go to record menu 1. Recording operations • schedule mode: choose the daily or weekly. • pre-event recording time : setup pre-event recording time. (1~5 sec) • post-event recording time: setup post-event recording time. (1~5 sec) • choose “record menu” menu.
Page 33
User’s manual ( 33 ) 2. Continuous/motion record schedule • setup each channel • put the choose area at here and press “enter” button. • continuous record setup • motion record setup • setup each channel • setup each day menu.
Page 34
User’s manual ( 34 ) 3. Alarm record schedule • set the alarm time per each channel menu • set the recording resolution, frame and quality per each channel • set the time for alarm setup with mouse or remote controller.
Page 35
User’s manual ( 35 ) • compatible cd writer models are lg(gce-8526b,gce-8527b), samsung(sw-252f, ts-h292a, sh-522c),asus(crw-5232as),gigabyte(go-r5232b) • compatible usb memory stick models are lg(royal,mobile,mirror), imation(iflash),memorive pro+ and compatible usb hdd is cutie(fhd-254). • inside ...
Page 36
User’s manual ( 36 ) client • system requirement ① main board (cpu): pentium-500(minimum), pentium 4 recommend ② os: higher than windows 98,directx 7.0a ③ memory (ram): more than 128 m ④ vga: graphic card that support the direct-x ※imm4 codec (when playback backup file) remote program install ① open...
Page 37
User’s manual ( 37 ) ③ after installation, click ‘close’ ④ appears ‘remote agent’ ‘backup player’ 2 icons on desktop • appears remote agent icon on desktop client.
Page 38
User’s manual ( 38 ) 1. Function introduction ① main screen image : showing present surveillance camera image ② camera selection button : indicate connected camera no. & select image to click camera no. ③ hidden/exit : hide dvr client window or exit program ④ time output : showing present time & dat...
Page 39
User’s manual ( 39 ) 2. Local setup ① group : registered dvr sites’ list ② dvr information : registered or to be registered dvr information ③ camera assignment : to choose images to monitor or to see chosen channel ④ event : choose events to receive ⑤ in/out : setup audio, alarm out ⑥ monitoring aud...
Page 40
User’s manual ( 40 ) ② ③ ④ ① osd display : setup osd to display on monitor ② video output : select video output signal ③ video mode : setup sequence interval time and alarm popup use ④ video display : setup quality improvement * saving directory : designate remote pc backup image saving folder. ① 2-...
Page 41
User’s manual ( 41 ) • click right button of mouse and setup ‘‘add group’ 2-3. Dvr add • type group name and click ‘ok’ button • type dvr information and choose channels for live monitoring • click ‘add’ button to add the information and try to connect to the dvr if the connection fails, check dvr i...
Page 42
User’s manual ( 42 ) 2-4. Dvr server remote setup • choose the dvr for setup and click the “setup” button. • click dvr system setup tap, password input window open after input password, setup window pop-up. • dvr system tap indicated only when connect as administrator. • dvr system setup possible to...
Page 43
User’s manual ( 43 ) • record operations - schedule mode: weekly or daily - sunday ~ saturday - pre event recording time: 0 ~ 5(second) - post event recording time: 5 ~ 180(second) alarm recording schedule / continuous/motion record schedule / panic record setup ‘set’ button in each area will make a...
Page 44
User’s manual ( 44 ) ② camera setup • status/title setup - setup for each camera (connection status or camera name). • color setup - setup color for each screen. • covert/ptz setup - setup each camera covert function & ptz protocol. - click the “properties” button. - setup about ptz camera. • motion...
Page 45
User’s manual ( 45 ) ④ event/sensor setup • alarm input - setup for each channel alarm connection & type. • alarm out - setup each channel when alarm, video loss, motion are happened. - hdd event: alarm on/off when hdd has the problem. - operation: setup relay connect with alarm sensor - mode: setup...
Page 46
User’s manual ( 46 ) ⑤ system setup • system info - possible to watch dvr system status. • smtp - setup the mail server and user’s e-mail. • users - setup the users. - click the “add” or “modify” button. • network speed - set up the transmission speed of video • disk overwrite - setup dvr hdd overwr...
Page 47
User’s manual ( 47 ) 3. Monitoring 3.1 selection network i/d • select i/d to connect server. • i/d can be add, change, and delete at setup 3.2 screen division selection • 1*1 view : showing one (1) video which user selected (selection video by camera selection button) • 4*4 view : 4 screen division ...
Page 48
User’s manual ( 48 ) 3.3 p/t/z control • p/t/z controller : camera p/t/z control by direction keys • focus/zoom select button : focus or zoom control by +,- button • 9 division mode • 16 division mode • press the ptz button. Client • +,- control button : focus or zoom control.
Page 49
User’s manual ( 49 ) 3.4 avi file conversion • click avi conversion button to start avi file conversion. • during avi conversion showing a message and before 1 click ‘stop” save avi file continuously . • ‘press ‘stop’ to open designate file name & saving location, and save avi file. • saved avi file...
Page 50
User’s manual ( 50 ) 3.6 event viewer ① ② ③ ④ ⑤ ⑥ ① indicate event occurred order no. ② indicate event occurred dvr no. ③ indicate event occurred camera no. ④ indicate event occurred time & date ⑤ indicate event detail description ⑥ return to search main to play selected event image client.
Page 51
User’s manual ( 51 ) 4. Search ① ③ ④ ⑤ ⑥ ⑦ ⑧ ② ① search screen : playing selected video ② search bar : search & indicate camera recording situation by time bar ③ live : return to watch mode / setup : open setup to change network setup or option ④ screen division selection : change playing screen div...
Page 52
User’s manual ( 52 ) ① ② ③ ④ ⑤ 4.2 search method ① indicate 0~24 hour ② indicate recording situation (blue : no record, yellow : recorded image at the time) ③ search bar : select video to drag mouse search controller in recorded area ④ indicate camera channel to confirm camera recording situation ⑤ ...
Page 53
User’s manual ( 53 ) 4.3 search option ① backup ② backup play ⑤ log search ⑥ event viewer ③ save image ④ print image ① backup – backup image from server to remote pc • time range designate backup image data length to input start time & end time. • channel : check camera channel for backup • include ...
Page 54
User’s manual ( 54 ) ① ② ③ ④ ⑤ • backup play setup in search mode is the same as dvr player, 1 so it can be run independently without running remote program. • backup player & ordinary moving picture player possible to playback, 1 real time avi backup file can display as the same format. ② backup pl...
Page 55
User’s manual ( 55 ) ③ save image – capture image & saving image at hard disk or removable disk • click ‘save image’ icon during playing video • designate file name, file type (jpg,bmp), and location and press saving • conversion and saving image from remote viewer ④ print image – present image capt...
Page 56
User’s manual ( 56 ) ⑤ log search – find video centering around event log at dvr. ① input start time and end time at the selected date to search event when press search button, event output at the below window ② choose the dvr for searching the log. ③ indicate event log order no. ( max event log no....
Page 57
User’s manual ( 57 ) ⑥ event viewer- showing present event in server & find image ① ② ③ ④ ⑤ ⑥ ① indicate event occurred order no. ② indicate event occurred dvr no. ③ indicate event occurred camera no. ④ indicate event occurred time & date ⑤ indicate event detail description ⑥ return to search main t...
Page 58
User’s manual ( 58 ) client 5. Web client • web client connection ① input ip address or url for dvr server at the internet explorer address input place. ② when appear active-x install message, please click confirm or continue. ③ showing web client window at internet explorer. ④ all function is same ...