1. DL manuals
  2. XRPlus
  3. DVR
  4. XRS 2004 Series
  5. User Manual

XRPlus XRS 2004 Series User Manual

Manual is about: XRPlus XRS 2004 Series DVR SYSTEM

Summary of XRS 2004 Series

  • Page 1

    User’s manual (xrs 2004 series) stand alone type dvr system xrplus incorporated.

  • Page 2

    • index • chapter 1. Specification & system organization 1. Specification -------------------------------------------------------------- 4 2. Product contents list -------------------------------------------------------- 6 3. System organization ------------------------------------------------------...

  • Page 3

    • index • chapter 6. Menu ⊙ go to menu -------------------------------------------------------------- 25 ⊙ go to system setup -------------------------------------------------------- 25 1. Display ------------------------------------------------------------------ 26 2. Camera -----------------------...

  • Page 4

    4 1. Specification video standard pal/ntsc audio 2-way audio conference monitor display real time:25 fps (pal), 30fps(ntsc) per camera covert camera operation programmable event/log search up to 1,000,000 for user login/out, config changes, remote access, connects/disconnects record scheduling daily...

  • Page 5

    5 network speed control 8 levels power consumption approx. 60watts temperature range 5℃ to 50℃ pre-alarm recording up to 5 sec., programmable per camera osd languages english, spanish, chinese, dutch, portuguese, french, russian, japanese, polish, romanian, german ethernet interface 10/100-base-tx, ...

  • Page 6

    6 2. Product contents list please confirm the contents when open package. ① basic contents remote controller remote client program install cd / user manual aaa battery x 2 12v adaptor power cable ② option contents hdd cd-rw usb momory xrs 2004 1. Specification & organization.

  • Page 7

    7 3. System organization network camera #1-4 alarm sensor #1-4 remote client pc xrs 2004 video in video out relay out vcr vga monitor av monitor image printer tcp/ip alarm input/out remote controller cd-rw (it is not supported) backup avi backup web client usb 1. Specification & organization.

  • Page 8

    8 ① power : system power on/off. ② remote controller sensor input. ③ cd-rw : cd-rw device for backup. ④ usb port: usb port for use the usb memory stick and usb hdd backup ⑤ led indicator : indicate present system status information. ( power: system on/off , record: record on/off , network: client ne...

  • Page 9

    9 ① video in : bnc port for connection of dvr & camera. (4 camera connectable) ② loop back : output dvr camera video to loop back port. (4 bnc port) ③ monitor out : output dvr video to av monitor. ④ spot out : output spot-out video to av monitor. ⑤ ntsc/pal : select ntsc or pal type. ⑥ vga out : out...

  • Page 10

    10 power system on/off menu: open menu return cancel setup or return to previous enter: apply setup change channel selection button (4ch available, #1~4 button) change screen mode open search mode ptz/iris mode • unused button’s description is omitted. • every button is operated same as front panel ...

  • Page 11

    • jumper setup as master or slave, following the ` direction of surface of hard disk. • jumper located at hard disk data cable or 1 rear side of hard disk. • if one hard disk installation, setup as master if two hard disk installation, second one setup as slave. ① jumper setup as master or slave 11 ...

  • Page 12

    12 ② connect ide cable to hard disk • insert disk, red cable head to power cable plug • connect power cable to hard disk in the same way ※ if one hdd install, connect with end of connector (black) recommended. If add hdd, connect with middle connector (gray) recommended. One hdd installation two hdd...

  • Page 13

    • jumper setup as master or slave (refer to cd-rw 1 direction at the surface). • if install one cd-rw at one ide cable, setup as master if install one cd-rw & hdd at one ide cable, 1 cd-rw setup as slave. ① jumper setup as master or slave 13 1. Cd-rw & hard disk installation (xrs 2004) ‼ when cd-rw ...

  • Page 14

    14 ⑤ after assemble with hdd bracket & connect cable (refer to previous page for hdd setup) ⑥ example of install cd rw & hdd ④ connect by ide cable & power cable at the cd-rw when two hdd installation hddx1 hddx2 hddx2 + cd-rw tip • when install master hdd, please connect 1 at ide1 port by master ca...

  • Page 15

    15 2. Camera connection connect camera at bnc port in back side panel. 3. Monitor connection connect monitor terminal or s-vhs terminal to monitor 4. Computer connection connect vga out terminal to computer monitor 5. Network connection connect ethernet terminal and network cable 3. Installation.

  • Page 16

    16 example of connection ptz camera no. 14 pin connector 6. Alarm/relay/ptz connection ① alarm alarm input - ‘in1, in2, in3, in4’ : connect sensor input by channel ‘gnd’ : connect ground system ② relay alarm output – ‘no, nc’ : after checking alarm output type (normal open or normal close) and conne...

  • Page 17

    17 8. Finishing installation system start by power button after finishing installation ※ hard disk format - if do not new hard disk format, system can’t recognize the hdd. So it’s same situation of no hdd. Please format hdd when insert new hdd. (only display possible, not work menu & search) 1. Powe...

  • Page 18

    4. Menu 1.Display - video setup for watch mode • status bar : record condition mark on/off (recording: red, pre-recording : green) • camera title: setup camera name to show left-upper side • event icon: indicate the menu location by icon • border : border mark on/off when 4ch division watch mode • b...

  • Page 19

    4. Menu • activation : activation on/off • list : sequence title 1-2. Sequence • choose add to add sequence • input sequence title • choose activation • save and exit • when input sequence title, you can use virtual keyboard by pressing enter button. 13.

  • Page 20

    2.Camera - setup camera 2-1. Camera title 4. Menu • covert : setup covert on/off *what’s covert? When covert on watch mode, display video is hidden, but recording is on. • title : setup camera name by virtual keyboard • control the monitor bright, contrast, color, tint • all setup possible to contro...

  • Page 21

    4. Menu ※ how to use the virtual keyboard • input the title by “enter” after choose by • press the button for shift then choose the other characters. Tip 2-3. Ptz setup • address : select ptz camera address • ptz protocol : select kind of ptz camera • enter button and setup the detailed ptz • baud r...

  • Page 22

    4. Menu 2-4. Motion sensor • move cursor by direction key and press enter at selected region • choose the partial motion region channel by channel • sensitivity: 1~10 • select all : select entire region • deselect all : cancel region setup • cancel : cancel change setup & exit • save & exit : save t...

  • Page 23

    4. Menu 3. Sound 3-1. Audio - audio setup • live audio : audio output on/off live audio output from audio in terminal • audio monitoring channel: select channel for audio output 1 nr. 1~4 audio in • network audio tx: choose the audio transmission • network audio rx: choose the audio receive 3-2. Buz...

  • Page 24

    4. Menu • time zone setup : choose the time by gmt standard. ※ how to time setup 1. Setup timezone as your location. 2. Setup the network time server and press the “sync” button. 3. If correct time is not getted automatically, setup the date/time manually. 4. If don’t follow as upper, you may have t...

  • Page 25

    4. Menu 4-2. Network • ip address : input ip address • gateway : input gateway ip for internet server • subnet mask : input subnet mask ip • dns server: input dns server ip • ddns server: input ddns server ip • net client port : input net client server • web server port : input web server port • max...

  • Page 26

    4. Menu 4-3. Mail • server: setup the mail server • setup by virtual keyboard after press the “enter” • port: mail server port • security: on/off • user & password: input the dvr login user id and password. 20

  • Page 27

    4. Menu 4-4. User management user setup • it is consisted 3 user group as administrator, manager, user. • total 7 user belong to 3 user group can be made. • input user id, password. • choose the group. • input the e-mail address. • it can edit user id information. • e-mail notification on/off : 1. O...

  • Page 28

    4. Menu 4-5. System information • s/w version: server firmware version • h/w version : hardware version • video signal type: ntsc or pal • disk capacity: used hdd capacity of the total hdd capacity • ip address: dvr’s ip address • mac address: fixed mac address of the dvr 22.

  • Page 29

    4. Menu 4-6. Factory default 5. Event/sensor 5-1. Hdd event • press “press” to start initialize. • showing warning message and press ok to run initialize. • if do factory default, every setup is initialized, but saving image is not erase. • drive: hdd connected location • smart alarm: on/off • check...

  • Page 30

    4. Menu 5-2. Alarm input 5-3. Alarm output ※ setup each channel when alarm, video loss, motion are happened. • channel : select channel • mode: setup reacted relay as latched/transparent mode. • type: setup relay type n/open or n/close. • operation: setup relay connect with alarm sensor. • duration:...

  • Page 31

    4. Menu 5-4. Buzzer out • buzzer on/off • operation: setup buzzer. • mode: setup reacted relay as latched/transparent mode. • hdd event: buzzer on/off when hdd event is happened. • duration: buzzer time(5sec~5min or until key-in) • setup each channel when alarm, video loss, motion are happened. 25.

  • Page 32

    4. Menu 5-5. E-mail notification 6. Disk management • disk overwrite : select overwrite permission when hard disk full o n: overwrite hard disk from oldest data off: when hard disk full, stop recording and buzzer activate • format : refreshment hard disk. All recorded data deleted • if the alarm, vi...

  • Page 33

    39 5. Menu ⊙ go to record menu 1. Recording operations • schedule mode: choose the daily or weekly. • pre-event recording time : setup pre-event recording time. 1 (1~5 sec) • post-event recording time: setup post-event recording time. 1 (1~5 sec).

  • Page 34

    40 5 menu 2. Continuous/motion record schedule 2-1. Daily 2-2. Weekly • continuous record setup • motion record setup • setup each channel • put the choose area at here and press “enter” button. • continuous record setup • motion record setup • setup each channel • setup each day.

  • Page 35

    41 5. Menu 3. Alarm record schedule 3-1. Daily 3-2. Weekly • alarm record setup • setup each channel • put the choose area at here and press “enter” button. • alarm record setup • setup each day • setup each channel.

  • Page 36

    42 5. Menu ⊙ go to archiving ① device : indicate cd-rw model and usb memory model automatically. If you use the cd-rw and usb memory (or usb hdd) together, it can choose the cd-rw and usb by button. ② start time : select start backup time. ③ end time : select end backup time. ④ channel & video/audio...

  • Page 37

    43 6. Client • system requirement ① main board (cpu): pentium-500(minimum), pentium 4 recommend ② os: higher than windows 98,directx 7.0a ③ memory (ram): more than 128 m ④ vga: graphic card that support the direct-x ※imm4 codec (when playback backup file) • dvr remote agent install ① open cd-rom dri...

  • Page 38

    44 6. Client ③ ask designate folder to install dvrremoteagent, recommend basic setup c:₩program files:₩cmslite. Click next. ⑤ finish dvrremoteagent program installation ④ showing progress of copy of files.

  • Page 39

    45 6. Client 1. Function introduction ① main screen image : showing present surveillance camera image ② camera selection button : indicate connected camera no. & select image to click camera no. ③ hidden/exit : hide dvr client window or exit program ④ time output : showing present time & date ⑤ sear...

  • Page 40

    46 6. Client 2. Setting ① • click the “add” button. ② ③ ④ ⑤ ⑥ ⑦ ⑧ ⑨ ① dvr status : indicate present saving dvr & dvr information. ② click to input new dvr information. ③ after amend all dvr information, applying change dvr information ④ selected dvr delete at dvr status. ⑤ input name to add or amend...

  • Page 41

    47 6. Client 2-2. Group list ① ② ③ ④ ⑤ ① group list ② dvr list belonging to the group ③ click to make the group. ④ after amend group information, applying change group information. ⑤ selected group delete at group status. • click the “add” button. ① ② ③ ① input the group name. ② selected group membe...

  • Page 42

    48 6. Client 2-3. Option ① ② ③ ④ ⑤ ① receive event : select kinds of event as multiple. Remote client only receive selected event. (system, hdd, alarm, video, rec) ② osd display : select screen information. (name, date, resolution) ③ screen switching interval (sec) : during the monitoring, select sc...

  • Page 43

    49 6. Client • click dvr system setup tap, password input window open after input password, setup window pop-up. • dvr system tap indicated only when connect as administrator. • dvr system setup possible to control almost every setup at the remote. • when activate setup or changing setup at the dvr ...

  • Page 44

    50 6. Client ② camera setup • status/title setup - setup for each camera (connection status or camera name). • color setup - setup color for each screen. • covert/ptz setup - setup each camera covert function & ptz protocol. - click the “properties” button. - setup about ptz camera. • motion area - ...

  • Page 45

    51 6. Client ④ event/sensor setup • alarm input - setup for each channel alarm connection & type. • alarm out - setup each channel when alarm, videoloss, motion are happened. - hdd event: alarm on/off when hdd has the problem. - operation: setup relay connect with alarm sensor - mode: setup reacted ...

  • Page 46

    52 6. Client ⑤ system setup • system info - possible to watch dvr system status. • smtp - setup the mail server and user’s e-mail. • users - setup the users. - click the “add” or “modify” button. • disk overwrite - setup dvr hdd overwrite on/off. • network speed.

  • Page 47

    53 6. Client 3. Monitoring 3.1 selection network i/d • select i/d to connect server. • i/d can be add, change, and delete at setup 3.2 screen division selection • 1*1 view : showing one (1) video which user selected (selection video by camera selection button) • 4*4 view : 4 screen division mode • 9...

  • Page 48

    54 6. Client 3.3 p/t/z control • p/t/z controller : camera p/t/z control by direction keys • focus/zoom select button : focus or zoom control by +,- button • +,- control button : focus or zoom control • 9 division mode • 16 division mode • press the ptz button..

  • Page 49

    55 6. Client 3.4 avi file conversion • click avi conversion button to start avi file conversion. • during avi conversion showing a message and before 1 click ‘stop” save avi file continuously . • ‘press ‘stop’ to open designate file name 1 & saving location, and save avi file. • saved avi file can o...

  • Page 50

    56 6. Client 3.6 event viewer ① ② ③ ④ ⑤ ⑥ ⑦ ① indicate event occurred order no. ② indicate event occurred dvr no. ③ indicate event occurred camera no. ④ indicate event occurred time & date ⑤ indicate event detail description ⑥ after select event, move search bar in search mode ⑦ return to search mai...

  • Page 51

    57 6. Client 4. Search ① ③ ④ ⑤ ⑥ ⑦ ⑧ ② ① search screen : playing selected video ② search bar : search & indicate camera recording situation by time bar ③ live : return to watch mode setup : open setup to change network setup or option ④ screen division selection : change playing screen division mode...

  • Page 52

    58 6. Client ① ② ③ ④ 4.2 search method ⑤ ① indicate 0~24 hour ② indicate recording situation (blue : no record, yellow : recorded image at the time) ③ search bar : select video to drag mouse search controller in recorded area ④ indicate camera channel to confirm camera recording situation ⑤ if conne...

  • Page 53

    69 6. Client 4.3 search option ①backup ②backup play ⑤log search ⑥event viewer ③save image ④print image ① backup – backup image from server to remote pc • time range designate backup image data length to 1 input start time & end time. • channel : check camera channel for backup • include audio : chec...

  • Page 54

    60 6. Client ① ② ③ ④ ⑤ ② backup play (dvr player) – transfer to dvr player ① showing image (possible to only 1*1view mode) ② backup file open to play first video ex. : ch02_04131730_04131735.Rec ( backup file for # 2 ch. Apr.13, 17h30m ~17h35m ) ③ indicate present playing video camera channel no. ④ ...

  • Page 55

    61 6. Client ③ save image – capture image & saving image at hard disk or removable disk • click ‘save image’ icon during playing video • designate file name, file type (jpg,bmp), and location and press saving • conversion and saving image from remote viewer ④ print image – present image capture and ...

  • Page 56

    62 6. Client ⑤ log search – find video centering around event log at dvr. ① input start time and end time at the selected date to search event when press search button, event output at the below window ② choose the dvr for searching the log. ③ indicate event log order no. ( max event log no. Of 1 pa...

  • Page 57

    63 6. Client ⑥ event viewer- showing present event in server & find image ① ② ③ ④ ⑤ ⑥ ⑦ ① indicate event occurred order no. ② indicate event occurred dvr no. ③ indicate event occurred camera no. ④ indicate event occurred time & date ⑤ indicate event detail description ⑥ after select event, move sear...

  • Page 58

    64 6. Client 5. Web client • web client connection ① input ip address or url for dvr server at the internet explorer address input place. ② when appear active-x install message, please click confirm or continue. ③ showing web client window at internet explorer. ④ all function is same with remoteagen...