Xsential X-301 Installation & Operating Manual - page 7
• Turn thermostat control dial counter clockwise
• Check that the hose connecting the faucet to the dispenser tank is not clogged, twisted or
kinked.
• Check for proper installation of copper tubing from faucet to dispenser tank and faucet to
water line. If connected cross-connected, valve may be damaged.
3.0 Water does not flow right away or at all:
• Due to high temperature and for safety reasons, the tank is not under pressure causing a
slight delay in water flow.
• Make sure all valves on water supply are open.
• Check hose from faucet for twisting or tight bending.
4. Water boils or vapour appears:
• Lower temperature setting by turning thermostat control dial counter clockwise.
Note: If lowering the thermostat setting does not stop the boiling, unplug the power supply cord and
contact customer service.
For further technical support contact:
Email: service@xsential.com.au
Ph: 1300 366 295
Xsential Pty Ltd
78 Daly Street Belmont Western Australia 6104
Ph: 1300 366 295 Fax: (08) 9277 2266
Email: sales@xsential.com.au www.xsential.com.au