Xstatic TORNADO LED User Manual - Page 3 Of 12
Page 3 of 12
XStatic Pro Lighting Tornado LED Fog Machine Manual
Technical Specifications
VOLTAGE:
AC120V 60Hz
POWER:
1500W/120V
WARM UP TIME:
6 minutes
SMOKE OUTPUT:
45,000Cu ft/m in
SPRAY HEIGHT:
23FT / 7M
DMX CHANNEL:
7CH
LED SPECIFICATION:
21 pcs 3W LEDs (R-5 G-6 B-5 A-5)
WIRELESS CONTROLLER: 8Key RF, Support W-8
TIMER: Support
X-TornadoTimer (Optional)
FLUID TYPE:
Water Base
TANK CAPACITY:
2.5L
DIMENSIONS:
390 x 350 x 190mm
Tornado LED Operation
Tornado can be used in three ways;
1) Right side up on the floor,
2) Sideways with the handle facing up
3) Upside down hang from trussing. When hanging the machine upside down,
the tank must be removed and switched to the bottom of the unit so that the
tank will remain right-side up. Follow the diagrams below to remove the tank
and change it so that it remains right-side up. Remove the tank, then remove
the support plate & screws and move to top of machine, reinstall screws so that
the tank remains right-side up. See below for the mounting diagram.
Note: Please remove the fog juice from the tank before doing this.