Summary of X-240BAR RGBA
Page 2
2 high power indoor bar washer, 240 rgb led user manual.
Page 3: Caution! Read Before Use!
3 caution! Read before use! For your own safety, please read this user manual carefully before you initially power up your fixture. ● examine packaging to ensure all parts included ● disconnect all power and other cables prior to servicing ● always make sure to provide adequate ventilation ● keep th...
Page 4: Features:
4 features: ● rgba color mixing ● color strobe effect ● 22 color mix effect programs ● led chases (adjustable speeds) ● electronic dimming 0-100% ● operating modes: sound active, master / slave, or dmx-512 control protocol ● dmx channel modes: 3, 4, 6, or 32 ● digital display for address and functio...
Page 5: Technical Specifications:
5 dmx control and chain connections: you can connect the dmx-output of a controller directly to the dmx-input of the fixture. If connecting mulitple units, be sure to use the proper cabling. Termination note: these units are not self terminating. If the last fixture in the dmx chain will need to be ...
Page 6: Menu / Controls:
6 menu / controls: setup menu: you can easily setup and control your 240 rgba led bar from the on-board lcd screen. Using the menu, setup, up and down buttons, you will find the following options to select and modify: led display operation - these instructions will provide access to the setup and co...
Page 7: Menu Options Cont’D:
7 3. Dimming mode press the mode button until colr displays on the menu screen. Then repeatedly pressing the setup button will scroll through 4 selections, red ( r ), green ( g ), blue ( b ), and amber ( a ). Each of the r, g, b, vand a selections menu options cont’d: 4. Sound mode - this menu will ...
Page 8: Dmx Channel Mode Setup
8 dmx channel mode setup 7. Dmx channel mode options these charts detail dmx setting options to access preset programs..
Page 9: Dmx Channel Modes Setup
9 8. Restore factory settings when fixture is off, press the mode and setup buttons at the same time and hold while turning the fixture power on. Hold the buttons until rset displays and flashes on the menu screen. Dmx channel modes setup.
Page 10: Dmx Setup Control:
10 dmx setup control: [to make terminator; solder a 120 resistor between signal (–) and signal (+) into a 3-pin xlr-plug and plug it in the dmx-output of the last fixture.] note: the last or final fixture in the dmx chain must have a terminator plug. A terminator is an xlr type plug that does not co...
Page 11: Dmx Setup:
11 dmx setup: care:.
Page 13: Ir Remote Control:
13 ir remote control: on buttons 0-9, the leds will display the associated colors when selected. 0 1 2 3 4 5 6 7 8 9 white red amber yellow1 green cyan blue purple pink yellow2 dimming mode by selecting manual and then a color button labeled with either r, g, or b, you can create your own color mix ...
Page 14
(no direct sales, dealers and distributors only) please register your product warranty on proxdirect.Com, submit your testimonials and setup photos to our website, & tag us on your social media websites. #proxdirect.