Operation manual ac1511b caution read this manual carefully before operating or servicing this air compressor, to familiarize yourself with the proper safety, operation, and standard operating procedures of this unit. Failure to comply with instructions in this manual could result in the voiding of ...
2 table of contents introduction 3 using the operator’s manual 3 specifications product identification 4 record identification numbers safety 5 receipt and inspection 6 safety instructions 6 hazard symbols and meanings 7 air tank warning 7 fire warnings 7 breathable air warning 8 electric shock warn...
3 using the operator’s manual thank you for purchasing an x-stream air compressor. Your machine is designed for long life, dependability, and the top performance you demand! Please take time now to read through this manual so you better understand the machine’s operation, maintenance and safety prec...
4 product identification record identification numbers compressor if you need to contact an authorized dealer or customer service line (1-866-770-1711) for information on servicing, always provide the product model and identification numbers. You will need to locate the model and serial number for t...
5 safety receipt and inspection before signing the delivery receipt, inspect for damage and missing parts. If damage or missing parts are apparent, make the appropriate notation on the delivery receipt, then sign the receipt. Immediately contact the carrier for an inspection. All material must be he...
6 the safety alert symbol ( ) is used with a signal word (danger, caution, warning), a pictorial and/or a safety message to alert you to hazards. Danger will cause death, severe injury or substantial property damage. Warning can cause death, severe injury or substantial property damage. Caution will...
7 warning air tank warning: drain liquid from air tank daily, or after each use, using the drain valve located on the bottom of the lower air tank. Failure to properly drain liquid from the tank will cause rust from moisture buildup, which weakens the tank and could lead to a violent tank explosion,...
8 warning electric shock warning: when using electric powered tools, machines or equipment, basic safety precautions should always be followed to minimize the risk of electrical shock or personal injury to yourself and others. This air compressor is powered by electricity and should never be used wi...
9 general safety information do not operate unit if damaged during shipping, handling or use. Damage may result in bursting and cause injury or property damage. Since the air compressor and other components (filters, lubricators, hoses, etc.) used, make up a high pressure pumping system, the followi...
10 warning do not spray flammable materials in vicinity of open flame or near ignition sources including the compressor unit. 12. Never attempt to repair or modify a tank! Welding, drilling or any other modification will weaken the tank resulting in damage from rupture or explosion. Always replace w...
11 1) this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change ...
12 operation & installation 5) the solvents trichloroethane and methylene chloride can chemically react with aluminium used in paint spray guns, paint pumps, etc, and cause an explosion. If you are using these solvents, use only stainless steel spray equipment. This does not affect your air compress...
13 maintenance 1) drain the moisture from the tank on a daily basis. A clean, dry tank will help prevent corrosion. 2) pull the pressure relief valve ring daily to ensure that the vale is functioning properly, and to clear the valve of any possible obstructions. 3) to provide proper ventilation for ...
14 troubleshooting troubleshooting chart trouble possible cause corrective action no start condition fuse blown or circuit breaker tripped check for cause of blown fuse or breaker and replace or reset loose electrical connections check wiring connections overheated motor press reset button or wait f...
15 grounding grounding instructions this product must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current. This product is equipped with a cord having a grounding wire with an appropriate groundin...
16 parts parts chart.
17.
18.
19.
20 if you need assistance with the assembly or operation of your compressor please call 1-866-770-1711.
