XT MF626 User Modem - page 33
32
P r o b l e m
P r o b l e m
P r o b l e m
P r o b l e m
P r o b l e m
The user interface
doesn’t start or
stays ‘Initializing’
after the modem
is plugged in.
The modem has
no signal.
Possible Causes
Possible Causes
Possible Causes
Possible Causes
Possible Causes
PC configuration is
not correct.
(No autorun)
The antenna is at
the wrong angle or
position.
You have no
network coverage.
You have not entered
your PIN number at
start up.
Suggested Solution
Suggested Solution
Suggested Solution
Suggested Solution
Suggested Solution
Start the program manually
by going Start > Program
Files or use the shortcut on
the desktop. Check the
drivers, try Safe Mode.
A d j u s t t h e a n g l e a n d
position of the USB modem.
Try moving location until
you get good reception. Try
the extension cable.
Restart the application and
enter your PIN number. If
the PIN is invalid you
cannot connect to the
network.
T
TT
TTrrrrroubleshooting
oubleshooting
oubleshooting
oubleshooting
oubleshooting
If you have any problems with your modem please check this
section. If the problem still exists test on an alternate PC and
contact your service provider. Check for more details and FAQ’s
at www.zte.co.nz