Xtant XSC Manual

Xtant Slim Components offer the flexibility of being

installed in a number of applications. The very shallow

mounting depth of the woofer allows mounting in

shallow doors. In addition, the variable mount tweeter

and built in attenuation circuit allow the user to cus-

tomize the system to his / her listening taste. Please

refer to the options below when installing the Xtant

Slim Components.

Dispersion Module Option

The Xtant Slim Components offer two tweeter dis-

persion modules for flexibility in mounting position.

The smaller module allows for a wider dispersion of

sound where as the larger option narrows the disper-

sion field thereby giving a more direct sound pattern.

In many applications, we have found with door mount-

ed locations, a wider dispersion pattern works well. In

contrast, a narrower dispersion pattern works well in

direct radiating situations. Both options are provided

to meet your listening needs.

Speaker Protection

Speaker grills are provided for use in protecting the

drivers when the components are mounted some-

where other than the existing factory locations.

Mounting the Driver

The most important factor in achieving good acoustic

response is properly mounting the driver. Be sure that

the speaker is mounted to a

solid baffle in order to isolate

the front sound wave from the

back sound wave. This can be

achieved by creating a solid,

airtight seal between the speak-

er and its mount. Please review

the tweeter mounting options at the

end of this section.

Wiring the Driver and Crossover

It is important to use good quality speaker wire

when installing speakers. Additionally, a tight connec-

tion is very important in speaker installations. A loose

connection can cause a speaker to cut in and out or

become distorted and harsh.

A 12db per octave two-way crossover is included in

the Xtant Slim Components. When using the XSC

crossover with these speakers, run a positive and neg-

ative speaker lead from the amplifier (if no external

amplifier, use speaker outputs from source unit) to the

input section of the crossover. Wire a second set of

leads from each of the tweeter and woofer positions to

their corresponding drivers. The tweeter option allows

the installer to choose a +3db, 0, or –3db setting in

order to customize the driver for all vehicle types.  

This warranty gives you specific legal rights, and you may also have

other rights which vary from state to state. Xtant Technologies

Incorporated (Xtant)warrants its amplifiers and accessories to be free

from defects in materials and workmanship under normal use and ser-

vice for a period of two (2) years from the date of original purchase

when the unit is installed by an Authorized Xtant Select Dealer. Non-

Authorized Dealer installed products carry a ninty (90) day parts and

labor limited warranty. The extent and conditions of Xtant’s Limited

Warranty are as follows:

1. Authorized Xtant Select Dealer Installed Products: Xtant will either

repair or replace at no charge, to the original purchaser, any unit which

Xtant’s examination discloses to be defective and under warranty, pro-

vided the defect occurs within two (2) years from the date of purchase

when the unit is installed by an Authorized Xtant Select Dealer and the

product is returned immediately to Xtant. This warranty is not trans-

ferable.

2. Non-Authorized Xtant Dealer Installed Products: Xtant will either

repair or replace at no charge, to the original purchaser, any unit which

Xtant’s examination discloses to be defective and under warranty, pro-

vided the defect occurs within ninty (90) days from the date of pur-

chase and the product is returned immediately to Xtant. This warranty

is not transferable.

3. The date of purchase and proof of Authorized Dealer Installation of

an Xtant amplifier and/or accessory must be established by an original

(or copy of the original) sales receipt which must accompany the article

being returned for warranty work.

4. This warranty shall NOT apply to any Xtant unit found to have the

original factory serial number removed or defaced. All products

received (by Xtant) for in warranty or out of warranty repair, with their

original serial numbers removed or defaced, will NOT be repaired and

will be returned to sender, freight collect.

5. The provisions of this warranty shall not apply to any Xtant unit used

for a purpose for which it is not designed, which has been repaired or

altered in any way, or which has been connected, installed, or adjusted

other than in accordance with the instructions furnished in Xtant’s

owner’s manual. Nor shall this warranty apply to any part which has

been subject to misuse, neglect, or accident.

6. Xtant does not authorize any other persons to assume any other lia-

bility in connection with its products. THIS WARRANTY IS THE ONLY

EXPRESS WARRANTY MADE BY XTANT APPLICABLE TO ITS PROD-

UCTS. ANY IMPLIED WARRANTY OR MERCHANTABILITY OR FIT-

NESS FOR A PARTICULAR PURPOSE APPLICABLE TO XTANT’S

AMPLIFIERS AND OR ACCESSORIES  IS  LIMITED IN DURATION TO

THE DURATION OF THIS  LIMITED WARRANTY. XTANT SHALL NOT

BE LIABLE FOR THE INCIDENTAL, CONSEQUENTIAL, OR COMMER-

CIAL DAMAGES RESULTING FROM THE BREACH OF THIS WRITTEN

WARRANTY. Some states or provinces do not allow the exclusion or

limitation of incidental or consequential damages or limitations on how

long an implied warranty lasts; so the above limitations or exclusions

may not apply to you.

7. Your unit will be serviced on an in-warranty basis within the war-

ranty period for the correction of warranted defects. If improper opera-

tion of your Xtant product should occur, contact your Authorized Xtant

Select Dealer for assistance with the return and factory repair of your

Xtant product. If an Authorized Xtant Select Dealer is not available,

please contact Xtant’s Customer Relations Department at (602) 431-

8686 from 8:00 am to 5:00 pm (MST) for assistance.

Xtant Technologies • 7676 South 46th Street • Phoenix, AZ 85040

TO RETURN XTANT PRODUCTS OUT OF WARRANTY: Contact

Xtant’s Customer Relations Department at (602) 431-8686 from 8:00

am to 5:00 pm (MST) for a Return Authorization Number. Return the

unit, postage prepaid, in the original protective carton. Please include

a description of the problem and, if desired, a request for an estimate

of repair costs. Unless a request for an estimate is included, the unit

will be repaired as necessary. Repaired unit will be returned with an

itemized statement, C.O.D.

TWO- YEAR LIMITED U.S.A. WARRANTY

Xtant Slim Components