XtendLan XL-HB-128M User Manual - Hardware Installation

Summary of XL-HB-128M

  • Page 1

    Xl-hb-128m homepna3.0 ethernet bridge user’s guide.

  • Page 2: Introduction

    - 1 - introduction this homepna to ethernet bridge connects any ethernet device to a high speed access device or to a home networking lan for internet access. This bridge brings you the newest ethernet compatible technology that uses the telephone wiring as the network's physical wiring thereby elim...

  • Page 3: Hardware Installation

    - 2 - hardware installation parts names and functions led indicators on the front panel led status glowing dimming flashing • power powered by dc5v not powered n/a ‚ lan link /act lan 1 link disconnect or link fail receive or transmit ƒ lan link /act lan 2 link disconnect or link fail receive or tra...

  • Page 4: Ports On The Rear Panel

    - 3 - ports on the rear panel port name type functions a dc5v dc connects to the power adapter plug. B lan1/lan2 (ethernet) rj-45 connects to ethernet port on ftth/xdsl modem or switch for internet access. C hpna & phone rj-11 connects to other homepna devices or telephone or phone port of adsl spli...

  • Page 5: Additional Items

    - 4 - telephone wire connects from hpna port to phone jack on the wall outlet. Cat5 ethernet cable connects from lan port to ethernet enabled devices as pc dc5v power adapter connects from power port of the main unit into a wall outlet additional items (not included) description a well-installed wan...

  • Page 6

    - 5 - 2. Using one telephone wire to connect the hpna port to rj-11 jack on the wall. Using another telephone wire to connect the other phone port to a telephone set (or connect the phone port to “phone” port of splitter of adsl modem). 3. Connect the lan1/lan2 port to your ethernet- equipped device...

  • Page 7

    - 6 - lan link/act on hpna link/act on for more information on leds, see section "led indicators on the front panel".

  • Page 8: Troubleshooting

    - 7 - troubleshooting the bridge has been designed to be a reliable and easy to use connection device. Please refer to the list below to aid in troubleshooting. The power (green) led is off. § make sure the power adapter is properly plugged into a live electrical outlet. The lan(ethernet) or hpna li...

  • Page 9: Specifications

    - 8 - specifications standards § ieee 802.3 10baset ethernet compliant § ieee 802.3u 100baset fast ethernet compliant § homepna 3.0 specifications compliant data rates § home networking: 128 mbps § ethernet: 10/100 mbps distances § home networking: 600 meter maximum between the two farthest nodes on...