1. DL manuals
  2. XtendLan
  3. IP Camera
  4. XL-ICA-107M1C
  5. User Manual

XtendLan XL-ICA-107M1C User Manual

Manual is about: Network 1.3 Mpix CCD Camera

Summary of XL-ICA-107M1C

  • Page 1

    Xl-ica-107m1c network 1,3mpix ccd camera user’s guide.

  • Page 2

    Thank you for purchasing our product. If there are any questions, or requests, please do not hesitate to contact the dealer. This manual may contain several technical incorrect places or printing errors, and the content is subject to change without notice. The updates will be added to the new versio...

  • Page 3: Safety Instruction

    1 user manual of network camera safety instruction these instructions are intended to ensure that the user can use the product correctly to avoid danger or property loss. The precaution measure is divided into ‘warnings’ and ‘cautions’: warnings: serious injury or death may be caused if any of these...

  • Page 4

    2 user manual of network camera notice: 1. Make sure the power supply voltage is correct before using the camera. 2. Do not drop the camera or subject it to physical shock. 3. Do not touch ccd (charge coupled device) modules with fingers. If cleaning is necessary, use a clean cloth with a bit of eth...

  • Page 5: Index

    3 user manual of network camera index chapter 1 introduction ................................................................................................................................................. 1 1.1 network camera functions and features ....................................................

  • Page 6

    4 user manual of network camera 4.3.8 white balance settings ..................................................................................................................... 40 4.3.9 backlight compensation.............................................................................................

  • Page 7: Chapter 1 Introduction

    1 user manual of network camera chapter 1 introduction network camera is a kind of embedded digital surveillance product that combines the features of both traditional analog camera and net dvs (digital v ideo server). Due to the embedded linux operation system and the latest davinci hardware platfo...

  • Page 8: 1.2 Applications

    2 user manual of network camera remote control: the product offers a 10m/100m self-adaptive ethernet interface. Support tcp / ip, http, dns, rtp / rtcp, pppoe protocols. Set the parameters, browse real time videos or check the camera performance through software or ie, and get external alarming and ...

  • Page 9: Chapter 2 Installation

    3 user manual of network camera chapter 2 installation notes： 1. Please check if all the items on the package list have been included with your camera. 2. Read the following contents carefully before the installation. 3. Make sure that all the related equipment is power-off during the installation. ...

  • Page 10

    4 user manual of network camera 4.

  • Page 11

    5 user manual of network camera 2.1.2 rear panel description fig. 2.1.6 rear panel of xl-ica-107m1c network camera 1. Standard ethernet (utp) rj45 (10m/100m self-adaptive). 2. 1 channel voice talk input,3.5mm audio interface, 2.0～2.4vp-p, 1kΩ. 3. 1 channel voice talk output, 3.5mm audio interface, e...

  • Page 12

    6 user manual of network camera 8. Standard bnc for 1 channel video output. 9. Gnd. 10. Power supply indicate lamp. 11. Power supply interface of ac24v or dc12v. 6.

  • Page 13

    7 user manual of network camera 1. Sd card slot：supports sdhc card, and the dimensions of sd meet the market’s normal standard. 2. Fixed screw: loosen this screw to rotate the camera horizontally and vertically to adjust the pan and tilt position. When the camera angle is determined, lock the fixed ...

  • Page 14: 2.2 Product Installation

    8 user manual of network camera cable hole with a waterproof plug. 6. Lens: first, loosen the zoom lock handle, rotate it until there is an appropriate view angle between tele and wide, then tighten the handle. Loosen the focus lock handle, rotate it until getting a clear image between near and far,...

  • Page 15

    9 user manual of network camera fig 2.2.1 fix ceiling bracket fig 2.2.2 fix camera fig 2.2.3 fix lens 2.2.2 dome camera installation dome camera can be installed include hold equipment, ceiling mounted, cylinders and other styles. Client can be installed in accordance with their own ways to achieve ...

  • Page 16

    10 user manual of network camera fig 2.2.4 fix card fig 2.2.5 fix in ceiling take the three columns of dome camera insert in the three fix slot of the ceiling plate. Pay attention to the direction of insertion. Let the ceiling plate “i” logo and the dome camera “i” logo in the same direction. Meanwh...

  • Page 17

    11 user manual of network camera transparent cover shown as below: fig. 2.2.8 unload the cover 2. Use the screws to fix the dome camera on the ceiling. Fig. 2.2.9 install the camera 3. Adjust the camera’s view angle while watching the video on the adjustment monitor. Loosen the fixed screws, and adj...

  • Page 18

    12 user manual of network camera fig. 2.2.10 install the cover 2.2.4 topological graph of network camera megapixels network box camera application: megapixels network dome camera application: 12.

  • Page 19

    13 user manual of network camera notice: fig 2.1.12 alarm output the alarm output is an on/off output that requires external power supply on connection. The external power supply shall be 12v dc/30ma, or use ac with external relays. Equipment damage or electric shock may cause if without relays. 2.3...

  • Page 20

    14 user manual of network camera fig.2.3.1 client software installation step2: input “user name”, “company name”; fig.2.3.2 customer information step3: select the destination folder and click ‘next’ to go to the next step. 14.

  • Page 21

    15 user manual of network camera fig2.3.3 ready to install the program step4: click ‘install’ to start installation till finish the installation; fig2.3.4 installation complete click the ‘finish’ button to close the dialog box. After the client software has been installed, you can find the remote cl...

  • Page 22

    16 user manual of network camera chapter 3 parameter configuration there are several network parameters of the camera which need to be set after the hardware installation. Those parameters including ip address, subnet mask and port number, etc. Can be set through various kinds of methods, 2 of which...

  • Page 23

    17 user manual of network camera fig. 3.1.2 select the device, and set its ip address and mask at the same network segment with the pc. The detailed introduction of sadp, please refer to appendix 1. 3.2 configuration via web browser before visit the camera via web browser, user should adjust securit...

  • Page 24

    18 user manual of network camera fig. 3.2.1 set the security level the default ip of the camera is 192.0.0.64 with 8000 as the default port, admin as the administrator, 18.

  • Page 25

    19 user manual of network camera and 12345 as the password. The administrator can create up to 15 separate operators with different right levels. To login the camera through ie, input the ip address in the address column, and the “login” dialog box will pop-up as fig. 3.2.2. Input your user name and...

  • Page 26

    20 user manual of network camera dialog box to pop up, and then set the parameters like ip address, etc. For your demand as fig. 3.2.4. Enter the menu by invoking the 95 th preset. Select the function you want by clicking the direction key. Click the iris+ button you can enter the submenu. The menu ...

  • Page 27

    21 user manual of network camera fig.3.4.1 register administrator enter the registered user name and password as fig. 3.3.2. Click “login” to enter the “preview” menu as fig. 3.3.3. Fig. 3.4.2 user login fig. 3.4.3 preview menu click the “configure” button in fig. 3.3.4, and then right click the bla...

  • Page 28

    22 user manual of network camera fig. 3 .4.4 add area fig. 3.4.5 add area properties input the area name (you can create whatever name you like) and click “ok” as fig. 3.3.6. Then right click the area you have just created as fig. 3.3.7. 22.

  • Page 29

    23 user manual of network camera fig. 3.4.6 area name adding completed fig. 3.4.7 right click the area name click “add device”, and the “add device” dialog box will pop up as fig. 3.3.8. Input your “device name”. Select “normal” from “register” option. Input your camera ip in “device ip”, e.G. 192.0...

  • Page 30

    24 user manual of network camera fig. 3.4.8 add device fig.3.4.9 camera adding completed click the “preview” button to enter the “preview” menu as fig. 3-3-10. Double click the channel name in the left tree to preview the camera feed. 24.

  • Page 31

    25 user manual of network camera double click the channel fig.3.4.10 preview menu please refer to “client software-4000(v2.0)_eng.Pdf” for a more detailed parameters configuration. You can find the document in the pc operating system after the installation of client software 4000 v. 2.0 by selecting...

  • Page 32

    26 user manual of network camera 3.4 v isit network camera in internet 3.4.1 v isit network camera with static ip when there is a static ip from an isp, open some ports (such as 80 and 8000 ports) in the router. Then a user can visit it through a web browser or client software via the internet. The ...

  • Page 33

    27 user manual of network camera fig.3.5.3 selecting normal mode 3.4.2 v isit network camera with dynamic ip fig.3.5.4 v isit camera through pppoe dail-up this camera supports the pppoe auto dial-up function, connecting the camera to a modem for dial-up access to an adsl network to get a public ip a...

  • Page 34

    28 user manual of network camera fig.3.5.5 pppoe configuration dialog box it is inconvenient to view a network camera with a dynamic ip, therefore, users should register with a dynamic dns service provider. (such as dyndns.Com) domain name resolution contains normal domain name resolution and privat...

  • Page 35

    29 user manual of network camera input domain names in the client software or ie to view the network cameras. Take the client software configuration as an example. Fig.3.5.7 selecting normal domain mode 2. Private domain name resolution fig.3.5.8 private domain name resolution a pc with a static ip ...

  • Page 36

    30 user manual of network camera camera’s name. And the server will find the camera from all the registered cameras and send its ip address to the client software. Once the client software gets the ip address, it can connect the network camera. Fig.3.5.9 selecting private domain mode 30

  • Page 37: 4.1 Main Menu

    31 user manual of network camera chapter 4 menu introduction note: in this chapter, we xl-ica-107m1c as 1.3 megapixels ccd network camera. 4.1 main menu call preset 95 and the menu will appear on the screen.”iris +” means “enter”, while “iris -” means “cancel”. Press up / down to move the cursor, an...

  • Page 38: 4.2.1 Language Settings

    32 user manual of network camera the main menu displays as below: fig.4.1.2 main menu 4.2 menu introduction of 2.0 megapixels cmos network camera 4.2.1 language settings press left / right to select language between chinese and english; 4.2.2 flicker control press left / right to select frequency be...

  • Page 39: 4.2.4 Frame Settings

    33 user manual of network camera 4.2.4 frame settings frame can’t be changed by pressing left / right button; user can select resolution through “configuration””remote configuration” “channel configuration ”“frame rate”; the relationship between frame and resolution is as below table: model resol...

  • Page 40: 4.2.6 Auto Gain Settings

    34 user manual of network camera hd720p 15fps 15fps 5fps uxga 10fps 10fps 5fps 4.2.6 auto gain settings press left / right to adjust auto gain level among off, low, middle and high; 4.2.7 day / night settings press left / right to select day / night mode among day, night and auto; fig.4.2.1 day mode...

  • Page 41

    35 user manual of network camera fig.4.2.2 night mode 4.2.8 white balance settings press left / right to set white balance auto or off; 4.2.9 effect mode settings press left / right to select effects mode among off, speia, negtive, solarize1 and sloarize2; 35.

  • Page 42

    36 user manual of network camera fig.4.2.3 sepia mode fig.4.1.1 negative mode 4.2.10 mirror mode settings press left / right to select mirror mode among off, left right, up bottom, and center; 36.

  • Page 43: 4.2.11 Eptz Settings

    37 user manual of network camera 4.2.11 eptz settings press left / right to set eptz on or off; under the resolution of qcif/cif/dcif/2cif/vga/d1/svga, support pan\tilt\zoom operation, pan and tilt operation can be carried out only after zooming in，support 127 preset positions (95 is excluded and us...

  • Page 44: 4.3.1 Language Settings

    38 user manual of network camera 4.3.1 language settings press left / right to select language between chinese and english. 4.3.2 resolution settings resolution can’t be changed by pressing left / right button; user can select resolution through client software, and the path is “configuration””remo...

  • Page 45: 4.3.5 Shutter

    39 user manual of network camera 4.3.5 shutter press left / right to adjust the exposure time from 1/25s, 1/50s, 1/100s, 1/250s, 1/500s, 1/1ks, 1/2ks, 1/4ks, 1/10ks, 1/100ks. 4.3.6 auto gain settings press left / right to adjust auto gain level among off, low, middle and high; note: when day / night...

  • Page 46

    40 user manual of network camera fig.4.2.2 night mode 4.3.8 white balance settings press left / right to set white balance atw1, atw2, atc or manual; atw1: camera uses ttl auto white balance algorithm to ideally recovery color, temperature range is from 2500k to 6500k. Atw2: camera uses ttl auto whi...

  • Page 47

    41 user manual of network camera settings, move the cursor to “back” and press confirm button ”iris+” to return to the previous menu. Note: when day / night mode is night, the white balance is invalid. Or day / night mode is auto, and the video is white and black, white balance is invalid too. 4.3.9...

  • Page 48

    42 user manual of network camera move cursor to “position”, and press “iris+” to enter the submenu; press up / down / left / right to adjust the position of blc area. After setting, press back to return to the previous menu. Adjust the bla size through the same operation as the above bla position. 4...

  • Page 49

    43 user manual of network camera 43.

  • Page 50: 1.  Brief Introduction

    44 user manual of network camera appendix 1 sadp introduction 1. Brief introduction sadp (search active devices protocol), can automatically search ip cameras in lan. User can modify the ip address, subnet mask and port of the device without visiting ip address of the device. Additionally, password ...

  • Page 51

    45 user manual of network camera input the new ip address, subnet mask, and port number, and click ‘save’ button. If a dialog pops up, showing ‘saved successfully’, that means you have modified the configuration information; if ‘saving failed’ dialog pops up, click the ‘cancel’ button to quit it. 4....

  • Page 52: Appendix 2 Port Map

    46 user manual of network camera appendix 2 port map note: the following setting is about tp-link router (tl-r410), which is maybe distinct from other router’s setting. 1. Firstly, select the router’s wan connection type. As the following fig. Shows: 2. Set the “network parameter” of the router as t...

  • Page 53

    47 user manual of network camera as the above mentioned setting, we map the router’s port 80, 8000, 554, 8200 to the network camera 192.168.1.23; and port 81, 8001, 555, 8201 to the network camera 192.168.1.24. In this way, user can visit the 192.168.1.23 through visiting the router’s port 80, 8000,...

  • Page 54: Appendix 3 Pin Definition

    48 user manual of network camera appendix 3 pin definition (1)utp between the network port of camera and hub (direct cable) (2)utp between the network port of camera and pc (cross cable): 48.

  • Page 55: Xl-Ica-107M1C

    49 user manual of network camera appendix 4 product specification xl-ica-107m1c specification parameter model xl-ica-107m1c camera image sensor 1/3 inch sony progressive scan ccd effective pixels 1280 (h) × 960 (v), 1.3m ccd min. Illumination color: 0.1lux @ f1.2, b / w: 0.01lux @ f1.2 electronic sh...

  • Page 56: Dimension

    50 user manual of network camera others working temperature -10°c ~ 60°c power supply ac24v, ±10% / dc12v, ±10%, poe (power over ethernet). Power consumption 4w max (10w max with icr working) dimensions (mm) 68.5 x 63 x 157.5 ( 2.71” x 2.5” x 6.25” ) weight 600g (1.32lbs) dimension.