XtendLan XL-ICA100U User Manual - page 27
XtendLan XL-ICA100U User’s Guide
2.3. Motion image response:
First Packet:
HTTP/1.0 200 OK\r\n
Connection: Close\r\n
Server: Ecam\r\n
Content-Type: multipart/x-mixed-replace; boundary=EOB\r\n
\r\n
EOB\r\n
Image Stream:
0xFF,0xD8,{Image Data are here},0xFF,0xD9,\r\n\r\nEOB\r\n
0xFF,0xD8,{Image Data are here},0xFF,0xD9,\r\n\r\nEOB\r\n
2.4. Explanation:
Pass => Administrator Password ranges from 4 digits to 10 digits.
V => Resolution: 0=QQVGA, 1=QVGA, 2=VGA
F => Anti-flicker: 1=50Hz, 2=60Hz
Q => Image Quality: 1=High, 2=Middle, 3=Low
B => Image Brightness: 1=High, 2=Middle, 3=Low
U => Image Orientation: 0=Normal, 1=Upside Down
3. Get still image from IP CAM
3.1. Get_Still_Image command:
GET
/Webcam.jpg?MobilePass=(Administrator_Password)&V=(Resolution)&F=(Anti-flicker)&Q=(Qu
ality)&
B=(Brightness)&U=(Orientation)\r\n
3.2. Invaild_Password response:
HTTP/1.1 401 Password not correct\r\n
Server: Jeilin http\r\n
Connection: close\r\n
\r\n
3.3. Still image response:
0xFF,0xD8,{Image Data are here},0xFF,0xD9
3.4. Explanation:
MobilePass =>Administrator Password ranges from 4 digits to 10 digits.
V =>Resolution: 0=QQVGA, 1=QVGA, 2=VGA
F =>Anti-flicker: 1=50Hz, 2=60Hz
Q =>Image Quality: 1=High, 2=Middle, 3=Low
27