Summary of XL-IPM401
Page 1
4-port ip power manager xl-ipm401 user’s guide.
Page 2
Ip power manager xl-ipm401 user’s guide 2 www.Xtendlan.Com warning: any changes to this equipment without permission may cause damages to your equipment! This equipment has been proved by ce & fcc to can be prevented from the influence of harmful electronic jamming in normal business use condition. ...
Page 3: Content
Ip power manager xl-ipm401 user’s guide 3 www.Xtendlan.Com content content ................................................................................................................................................................. 3 introduction ...................................................
Page 4: Introduction
Ip power manager xl-ipm401 user’s guide 4 www.Xtendlan.Com introduction xl-ipm401 is a web controller which can be easily used in the industry field. With the remote network control technology, user can control or query the power supply of equipment. User can do this in any computer connected to the...
Page 5: 1 Specification
Ip power manager xl-ipm401 user’s guide 5 www.Xtendlan.Com 1 specification 1.1 working limits ¾ maximum rated voltage: 250v ac, 24v dc ¾ maximum rated currency: (total) for 120v 15a, for 240v 10a ¾ maximum rated currency: (individual) 6a ¾ action delay: max 10ms ¾ working temperature: 0 ~ 70°c note:...
Page 6
Ip power manager xl-ipm401 user’s guide 6 www.Xtendlan.Com rear interface shown below: port description, from left to the right: 1. 90-240vac power input port 2. Power switch : the power switch on /off of device 3. Out 1- 4: 4 individually switched ac outlets.
Page 7: 2 Installation
Ip power manager xl-ipm401 user’s guide 7 www.Xtendlan.Com 2 installation 2.1 hardware & software installation before you start to use xl-ipm401, please follow the steps below ¾ check the package to make sure the contents is complete. ¾ prepare one ethernet hub or router ¾ check the voltage of the p...
Page 8: 2.3 Software Installation
Ip power manager xl-ipm401 user’s guide 8 www.Xtendlan.Com 2.3 software installation having connected the power supply and network wire with rj45 port to the xl-ipm401, please install the software by following the steps below: 1. Start your computer, put the installation disc in the cdrom, then find...
Page 9
Ip power manager xl-ipm401 user’s guide 9 www.Xtendlan.Com 2.4 control and settings through the internet explore type the new ip address of xl-ipm401 in the address field and you can enter the login web page. Input the default password 12345678, or the password set by you, click ok, and you can then...
Page 10: 2.5 System Settings
Ip power manager xl-ipm401 user’s guide 10 www.Xtendlan.Com 2.4.2 power supply state query click the “ set power” button on the left, the page will be refreshed. The state of each electric outlet will be displayed in column control. 2.5 system settings user can set the password, ip address, e-mail a...
Page 11
Ip power manager xl-ipm401 user’s guide 11 www.Xtendlan.Com 2.5.2.1 ip address settings: ethernet (lan ) and internet(wan) local area network (lan) : in lan, you can set a fixed ip address or gain it from a dhcp server automatically. We suggest to use a fixed ip address in order to let the other com...
Page 12: 2.5.2.2 Email Settings
Ip power manager xl-ipm401 user’s guide 12 www.Xtendlan.Com 2.5.2.2 email settings when you finished the e-mail settings, you can set to let xl-ipm401 send its ip address automatically. For example: * mail server: abc.Com * pop3servcer : cdef.Com * password : xxxxxxxx * sender: 123@abcd.Com * receiv...
Page 13
Ip power manager xl-ipm401 user’s guide 13 www.Xtendlan.Com 2.5.2.3 control through time schedule: user can control the time when xl-ipm401 starts or stop through preset time schedule. Click the power schedule on the left of the page; you can select enter the time schedule setting. If user wishes to...
Page 14: 2.5.2.6 Wake On Lan (Wol):
Ip power manager xl-ipm401 user’s guide 14 www.Xtendlan.Com 2.5.2.4 setup up own outlet default status : when regain power , each outlet will set as appointed default status. 2.5.2.5 internal clock settings & network time protocol (ntp): * user can enter the internal clock settings : year , month, d...
Page 15: 2.5.2.7 Ping (Ip Watchdog)
Ip power manager xl-ipm401 user’s guide 15 www.Xtendlan.Com 2. Your network card must support “wol”, remember to connect your connect cable to main board or the network card can not send “power on” message to your main board. After setup in main board and network card , you can use wol function by f...
Page 16
Ip power manager xl-ipm401 user’s guide 16 www.Xtendlan.Com 2.5.2.8 gprs for cell phone : support wap. Xl-ipm401 support gprs function, you can use cell phone (with online function), we support : motorola v878 , sony ericsson t630 & k700i. . To setup the online device ( real ip address) as operate i...
Page 17: 2.5.2.9 Firmware Update:
Ip power manager xl-ipm401 user’s guide 17 www.Xtendlan.Com 2.5.2.9 firmware update: if no firmware to update please do not go to this page! As received new firmware, user can gain more functions for xl-ipm401 through firmware update. Click the firmware update on the right side of the page. Step 1. ...
Page 18: 2.5.2.10
Ip power manager xl-ipm401 user’s guide 18 www.Xtendlan.Com 2.5.2.10 check status though snmp xl-ipm401 support snmp v1 and v2 , user can use snmp programs to get the status of each port in xl- ipm401. Following is mib description:.
Page 19: 2.5.2.11
Ip power manager xl-ipm401 user’s guide 19 www.Xtendlan.Com 2.5.2.11 control and settings through http commands user can control the xl-ipm401’s action directly though the http orders. The format of the http order is : http://username:password@xxx.Xxx.Xxx.Xxx/set.Cmd?Cmd=***power+para1=*+para2=*+par...
Page 20
Ip power manager xl-ipm401 user’s guide 20 www.Xtendlan.Com 3. Schedule control : user can use http command to arrange the xl-ipm401 operation in specific time, http command format as follow: http://username:password@xxx.Xxx.Xxx.Xxx/set.Cmd?Cmd=setschedule+power=**+yy=****+mm =**+dd=**+hh=**+mn=**+s...
Page 21: 3 Faq
Ip power manager xl-ipm401 user’s guide 21 www.Xtendlan.Com 3 faq q1: i forgot the password and can not enter the administration page now, what can i do? A1: use username " super user " when log in webpage and then click "ok " turn power off for few second and then turn on on . Xl-ipm401 will to set...