XtendLan XL-RAID-SATA-USB User Manual - Chapter 3 Instructions
Manual is about: XtendLan Data Backup system User's guide
of
20
Chapter 3 Instructions
3.1
System Operating Procedure and Operation architecture
The system operating procedure and operation architecture are as follow: (Default system
password: 0000)
3.2
Changing RAID Level and Scheduling
The XL-RAID-SATA-USB offers two RAID levels – RAID 0 and RAID 1. You may choose the RAID level
suitable for your needs. The factory default is at RAID 1.
Note : 1. Please backup all data on hard disks before changing RAID level.
2. Changing the RAID level results in loss of all data on disks.
3.2.1 Changing from RAID 1 to RAID 0 Mode
Step 1 Log into the system then use “▼” or “▲” with the LCD display to scroll through the options until
“CHANGE RAIDMODE RAID-0” appears. (Default system password: 0000)
12
Instructions