Xterra EU100 Owner's Manual

Manual is about: HYBRID ELLIPTICAL

Summary of EU100

  • Page 1

    Eu100 hybrid elliptical upright bike owner’s manual please carefully read this entire manual before operating your new hybrid elliptical upright bike fitness.

  • Page 3: Table of Contents

    Table of contents 1 2 4 12 15 attention this fitness hybrid elliptical upright bike is intended for residential use only and is warranted for the application. Any other application voids this warranty in its entirety. Product registration important safety instructions eu100 assembly instructions ope...

  • Page 4: Product Registration

    Eu100 elliptical 1 record your serial number please record the serial number of this fitness product in the space provided below. Serial number register your purchase the self-addressed product registration card must be completed in full and returned to xterra fitness. You can also go to www.Xterraf...

  • Page 5

    2 eu100 elliptical • do not operate equipment on deeply padded, plush or shag carpet. Damage to both carpet and equipment may result. • before beginning this or any exercise program, consult a physician. This is especially important for persons over the age of 35 or persons with pre-existing health ...

  • Page 6: Before You Begin

    Eu100 elliptical 3 before you begin thank you for selecting our revolutionary xterra eu100 hybrid elliptical upright bike. Walking is an effective exercise for increasing cardiovascular fitness, building endurance, and toning the body. Our fitness hybrid elliptical upright bike provides an impressiv...

  • Page 7

    4 eu100 elliptical eu100 pre-assembly check list part no. 1 11/12 18 22 4 2 9/10 19 13/17 20 16/64 14/15 description main frame pedal tube (l/r) stationary handlebar seat rear stabilizer front stabilizer pedal (l/r) computer front post / 8-level tension control knob seat post upper handlebar (l/r) b...

  • Page 8

    Eu100 elliptical 5 eu100 assembly pack checklist part no. Description q’ty 6 curved washer Ф22*Ф10 4 7 dome nut m10 4 8 carriage bolt m10*75 4 30 allen screw m8*16 6 31 curved washer Ф22*Ф8 6 32 pvc cap 6 37 carriage bolt 4 38 allen screw m6*12 4 39 hex head bolt m10*78 2 40 sleeve 2 41 washer Φ10*Φ...

  • Page 9: Eu100 Assembly Instructions

    6 eu100 elliptical 1. Attach the front stabilizer (2) to the front of the main frame (1), fasten with two carriage bolts (8), two curved washers (6) and two domed nuts (7). 2. Repeat for the rear stabilizer (4) to the rear of the main frame (1). Eu100 assembly instructions hardware step 1 front stab...

  • Page 10: Support Tube

    Eu100 elliptical 7 support tube 2 hardware step 2 4 allen screws (#30) 4 curved washers (#31) pre-assembled on tension control knob: 1 washer (#65) 1 bolt (#66) 1. Turn the tension control knob (17) to level 8. Connect tension control knob (17) with lower tension cable (59), connect lower sensor wir...

  • Page 11: Eu100 Assembly Instructions

    8 eu100 elliptical 1. Attach the left bottom handlebar (14) to the left side axle of the front post (13). Secure using one d type washer (36), one washer (35), one spring washer (34) and one hex head screw(33). Attach the pvc cap (32) onto the hex head screw(33). 2. Repeat for the right bottom handl...

  • Page 12: Pedal Tubes

    Eu100 elliptical 9 pedal tubes 4 hardware step 4 4 pvc caps (#32) 2 hex head bolts (#39) 2 sleeves (#40) 6 washers (#41) 6 nylon nuts (#42) 4 carriage bolts (#44) 1/1 hinge bolt (#45l/r) 2 wave washers (#46) 2 washers (#47) 1/1 lock nut (#48l/r) 1. Attach the left pedal tube (11) to the left side of...

  • Page 13: Eu100 Assembly Instructions

    10 eu100 elliptical 61 63 18 63 19 62 61 19 62 30 31 63 18 13 11 20 26 27 28 29 22 57 60 eu100 assembly instructions 61 63 18 63 19 62 61 19 62 30 31 63 18 13 11 20 26 27 28 29 22 57 60 61 63 18 63 19 62 61 19 62 30 31 63 18 13 11 20 26 27 28 29 22 57 60 handlebars and console 5 hardware step 5 2 al...

  • Page 14: Handlebars

    Eu100 elliptical 11 4 allen screws (#38) 4 carriage bolts (#37) handlebars 6 hardware step 6 1. Connect the left top handlebar (16) to the left bottom handlebar (14). Secure using two allen screws (38) and two carriage bolts (37). 2. Repeat for the right top handlebar (64) to the right bottom handle...

  • Page 15: Operation of Your Console

    12 eu100 elliptical operation of your console eu100 console buttons: mode: press to select the desired function between: scan, time, count, calories and total count. Set: press to set the values of time, count and calories reset: press to reset your function value to zero. Press and hold for 2 secon...

  • Page 16: Functions

    Eu100 elliptical 13 functions computer operation remarks scan: displays each function in sequence every 6 seconds. The display loop is time - speed - distance - calories - odometer - pulse. Time: shows your elapsed workout time up to 99:00 counts down from your preset target time to 00:00 during you...

  • Page 17: Maintenance

    14 eu100 elliptical maintenance the safety of this produce can be maintained only if regular periodic checks are made. Most checks can be performed once a week. However some checks should be made before each workout, and are indicated as such below. Checks • check that pedals are tight, pedals can w...

  • Page 18

    Eu100 elliptical 15 manufacturer’s limited warranty effective august 4, 2016 - hybrid elliptical upright bike limited warranty xterra fitness inc. Warrants all its home use hybrid elliptical upright bike parts for a period of time listed below, from the date of retail sale, as determined by a sales ...

  • Page 19

    16 eu100 elliptical.

  • Page 20

    Eu100 elliptical 17 www.Xterrafitness.Com ©2016 all rights reserved. Eu100 owner’s manual 3000 nestle road jonesboro, ar 72401 - phone:870-333-5500 - fax:870-935-7611.