Summary of XPR16H
Page 1
Quick start guide 4/8/16-ch dvr.
Page 3: 1.1 Install Hard Drive
4/8/16dvr quick start guide 1 1. Install hard drive &dvd writer 1.1 install hard drive notice: 1. This series support eight sata hard drives. Please use the hard drive the manufacturers recommend specially for security and safe field. 2. Please calculate hdd capacity according to the recording setti...
Page 4: 1.2 Install Dvd Writer
4/8/16dvr quick start guide 2 step 5: cover the back cover of the device and screw firmly. 1.2 install dvd writer step 1: unscrew and open the case and then unscrew the screws in the both sides to take out of the upper iron bar as shown below: step 2: install the dvd holder attached with the device....
Page 5: 2 Connections
4/8/16dvr quick start guide 3 2 connections 2.1 rear view for 4-ch dvr note: the usb port on rear panel can only connect to usb mouse. Fig 2.1 rear view for 4-ch dvr 1 video out: connect to monitor 2 audio output, connect to the sound box 3 connect to high-definition display device 4 4 ch audio inpu...
Page 6: 3. Power On
4/8/16dvr quick start guide 4 5 video input channels from 1-8 6 loop out; for outputting 1-8ch image independently 7 connect to monitor as an aux output channel by channel. Only video display, no menu show 8 mic in: talk 9 vga output, connect to monitor 10 connect to usb mouse 11 network port 12 con...
Page 7: 4. Basic Setup
4/8/16dvr quick start guide 5 step2: the device will be loaded, and the power indicator will display blue step3: before start, a wizzard window will be pop-up and show some information about time zone，time setup，network configuration, record configuration and disk management. User can setup here and...
Page 8: 4.3
4/8/16dvr quick start guide 6 stamp and recycle. Schedule configuration: users can set schedule for timer, motion detection, and sensor alarm respectively. Alarm configuration: users can set sensor type, alarm trigger and buzzer alarm. Network configuration: users enable network function, and config...
Page 9
4/8/16dvr quick start guide 7 motion detection recording: when there is a motion event detected, the camera will be triggered to record and have an alarm out. Enter into main menu-alarm configuration-motion configuration (refer to fig 4-4), enable detection first; fig 4-4 motion detection interface ...
Page 10: 4.4
4/8/16dvr quick start guide 8 4.4 playback this unit supports live record playback, time search and event search. It displays full or 4 screens in playback. 4.4.1 live playback click play button to playback the record. Refer to figure4-7. User can do concrete operation by click the buttons on screen...
Page 11: Event Search
4/8/16dvr quick start guide 9 fig 4-8 time search 4.4.3 event search enter into search configuration, select event search (refer to fig 4-9), and choose a certain day in the event search interface. Click search button, the searched event information will displayed in the event list box, user can sel...
Page 12: 5 Remote Surveillance
4/8/16dvr quick start guide 10 this unit supports backup by built-in sata dvd writer, with usb flash and usb hdd. Install dvd writer (refer to chapter1.2), enter into backup interface (refer to fig 3-10), set the start & end time, select channels, click search button; the searched data will be displ...
Page 13: 5.2
4/8/16dvr quick start guide 11 the dvr in ie address blank and enter. Ie will download activex automatically. Then a window pops up and asks for user name and password. Input name and password correctly (the default user name is admin and the password is 123456), and enter. It will show the remote p...