Yacht Devices YDNU-02NF User Manual - page 9

— 9 —

II. Installation of Device and Connection to NMEA 2000 Network

The Device requires no maintenance. When deciding where to install the Device, choose a dry mounting 

location. Avoid places where the Device can be flooded with water, as this can damage it.

The USB connector of YDNU-02RF and YDNU-02NF models may be mounted outside. In this case, 

using YU-USB2-CPI-01-100 or YU-USB3-CPI-01-100 cables ensures an IP67 waterproof connection.  

It is equipped with a protective cap used when no cable is connected (the connector is also compatible  

with  general  USB  Type  A  cables).  You  can  find  the  nearest  supplier  on  the  Internet  by  searching  for  

the cable model or getting a local supplier contact from manufacturer: 

http://www.cnlinko.com/

Figure 1. Mounting of YDNU-02RF and YDNU-02NF connectors on a bulkhead