Yada Backup Camera User Manual

Summary of Backup Camera

  • Page 2: Table of Contents

    Table of contents 1. Introduction ........................................................................................................................................................................................ 1 2. Package contents ..............................................................

  • Page 3: 1. Introduction

    1 please read all of the installation instructions carefully before installing the product. Improper installation will void manufacturer’s warranty. The installation instructions do not apply to all types of vehicles, and are written as guidelines to assist in installing the system. Consult an exper...

  • Page 4: 2. Package Contents

    2 1. 4.3” dash monitor or 3.5” mirror monitor 2. Wireless digital transmitter 3. 12v/24v power adaptor 4. Hardwire power cable for dash monitor or 3.5” mirror monitor (optional) 5. Windshield mount for dash monitor only 6. Hook and loop straps for mirror monitor only 7. Weatherproof rearview camera ...

  • Page 5: 3. Product Specifications

    3 digital wireless backup camera with dash monitor 1. 4.3” tft lcd display 2. 2.4g digital wireless 3. Image sensor: cmos 4. Operation range: 50 feet 5. Input voltage dc12~24 6. Operation temperature: -10~50 7. Storage temperature: -20~60 8. Camera water resistance: ip67 rating digital wireless back...

  • Page 6

    4 original rearview mirror. Tip: use both hands on either side of the mirror to snap into place evenly. Make sure the mirror is centered before snapping into place. 6. Once the yada mirror is in place, reach behind and one by one reattach the hook and loop straps together to hold the yada mirror tig...

  • Page 7

    5 see below. You can also visit our faq’s at www.Letsyada.Com for more information caution: this unit is designed to operate on a 12v/24v dc negative ground electrical system. Connecting to other types of electrical systems will cause damage to your vehicle. Please contact the manufacturer if you ar...

  • Page 8

    6 9. While sitting in the driver’s seat of the car with the key in the accessory position. The monitor will automatically start when connected to a power source. If when you place the vehicle in reverse there is no image, go to the section “pair and connection” for more information. 10. Put the vehi...

  • Page 9: 5. Pairing And Connecting

    7 pairing is not necessary as the unit has already been paired. If you are not able to connect the camera, please try to pair the camera by the following steps: 1. Press “pair” button on the wireless digital transmitter. You will see the led blinking in red. The unit will remain in pair mode for 1 m...

  • Page 10: 7. Settings

    8 you can adjust the contrast and brightness of the monitor according to your desired level. Note: contrast and brightness setting only works while the backup image is on the screen. To adjust contrast 1. Press “menu” 2. Go to “contrast” by pressing “ – “ 3. Press “parking aid line” to enter 4. Pres...

  • Page 11

    9 wide-angle lens is used. Objects in the rear view monitor will appear visually opposite than when viewed in the rear view and outside mirrors. Use the inside mirror or glance over your shoulder to properly judge distances to other objects. • the backup camera “night vision” feature is an aid to a ...

  • Page 12

    10 inclement weather. • when strong light directly enters a camera, objects may not be displayed clearly. • the screen may flicker under fluorescent light. • the colors of objects on the rear view monitor may differ somewhat from those of the actual object. • if dirt, rain or snow attaches to the ca...

  • Page 13: 9. Maintenance & Warranty

    11 a. Cleaning • if dirt, rain or snow attaches to the camera, the monitor may not clearly display objects. If water droplets, snow or mud adhere to the camera lens, rinse with water and wipe with a dry cloth. • do not use alcohol, benzene or thinner to clean the camera. This will cause discoloratio...

  • Page 14

    12 6. This is a “repair or replace” warranty only, and does not cover the costs incurred for the installation, removal or reinstallation of the product, or damage to any mobile phone device or vehicle. Owner’s responsibilities: winplus north america will make every effort to provide warranty service...

  • Page 15

    13 vehicle. You should always look around outside your vehicle and use your mirrors to confirm rearward clearance and that your vehicle can back up safely. Winplus north america and/or its affiliates are not responsible for a user’s intended or actual use of the digital wireless backup camera. In no...

  • Page 16: 10. General Information

    14 4. If your product is found by winplus to have a defect in material or workmanship, within the warranty period, it will be repaired or replaced at no charge and returned to you prepaid. 5. Winplus makes no other warranty of any kind aside from the limited express warranty stated herein. Winplus a...

  • Page 17

    15 fcc/icc federal communication commission interference statement this equipment has been tested and found to comply with the limits for a call b digital device, pursuant to part 15 of the fcc rules. These limits are designed to provide reasonable protection against harmful interference in a reside...

  • Page 18

    16 ic statement operation is subject to the following two conditions: 1. This device may not cause interference and 2. This device must accept any interference, including interference that may cause undesired operation of the device. This device has been designed to operate with an antenna having a ...

  • Page 19

    17.

  • Page 20

    Www.Winplus.Com www.Letsyada.Com © 2012 winplus north america inc. All rights reserved. Winplus, the logo design, and yada are trademarks or registered trademarks of winplus north america inc. The bluetooth ® word mark and logos are owned by the bluetooth sig, inc. And any use of such marks by winpl...