Yada BT53901F-1 User Manual - page 10
8
•UsetheSuctionCupMounttoattachtotherearwindoworrear-mostsideglassthatisnotadoorwindow.
For safety, we recommend not mounting to the window of the door. Because there is a power cable, this
can become dangerous when opening the rear or side door. Ensure that the Suction Cup is secured tightly
to the window and adjust the Camera to the angle needed.
•TomounttheCamerausingtheSinglePoleHeadrestMount,unscrewthetighteningpinandmovetowards
the main mount to separate the two clamps that go around the headrest pole. Place the mount and clamp
around the headrest pole that best suits the camera placement that is needed. Secure the mount to the
pole by pushing the pin back across the clamp and screw tightly. The Camera can then be mounted on the
bracket and adjusted to the desired angle.
This Mount can fit a headrest pole that is 10mm to 30mm in diameter. If needed, please use the additional
foam grip provided.
iii. Powering the Camera:
•TheCameracomeswitha12/24vpoweradapterwhichcanbepluggedintoanyavailablesocketinyour
vehicle. The cable is 5 meter/16 feet long. Starting with the power cord at the base of the Camera, run and
tuck the cable to the available socket you wish to plug in to. Ensure that the cable is not in contact with the
baby seat or within reaching distance of the baby. It is recommended to tuck the cable behind the seat,
lining, rug or panels in order to keep it fron tangling or getting caught on any object.
•OnceyouhavetheCamerasecureinitsMount,andthepowercabletuckedcarefullyoutoftheway,you
can plug in the adapter into your 12/24v socket. Make sure the adapter is pushed all the way into the
socket.