Summary of BT54860
Page 1
With 5” dash monitor bt54860/bt54998.
Page 2: Table of Contents
Table of contents 1. Introduction ...............................................................................................................................................................................1 2. Package contents ........................................................................
Page 3: 1. Introduction
1 please read all of the installation instructions carefully before installing the product. Improper installation will void manufacturer’s warranty. The installation instructions do not apply to all types of vehicles, and are written as guidelines to assist in installing the system. Consult an exper...
Page 4: 2. Package Contents
2 1. 5” dash monitor 2. 1 backup camera 3. 12v/24v power adapter for monitor 4. Hardwire cable for monitor 5. Suction cup mount for monitor 6. Install kit 7. Optional 12v/24v power adapter for the camera 8. User’s manual 9. Quick install guide 10. Professional installation offer (for us only) 2. Pac...
Page 5: 3. Product Specifications
3 1. Frequency: 2.4ghz 2. Operating voltage: dc 12v / 24v 3. Operating temperature: -10~+50°c 4. Maximum signal range: 30 feet/10metres (without interference or obstruction) 5. Camera water resistance: ip67 rating dash monitor installation 1. Stick the suction cup mount on the windshield and adjust ...
Page 6
4 backup camera installation - hardwire power this installation is based on powering the camera over the reverse tail lights. When installed as directed, the camera image will only appear when the vehicle is in reverse. Caution: this unit is designed to operate on a 12v/24v dc negative ground electr...
Page 7
5 5. At your taillight, remove the light bulb socket from the reverse light housing. 6. Determine the reverse light power wires for your car, designating the positive and negative wires. If you are not sure of which are the power wires, then please contact your vehicle manufacturer or reference a wi...
Page 8
6 16. Once license plate and camera are secure, you can adjust the vertical angle of the camera to your specific need. 17. As a last check, note the position of the view from the camera when you place the vehicle in reverse. Adjust the angle of the camera as necessary to achieve the best rear view. ...
Page 9
7 backup camera installation – 12/24v direct power this installation allows the camera to be powered via an adapter into any available 12/24v socket. When installed as directed, the camera image will always appear on the monitor screen as long as both are receiving power.* 1. Remove the hard wire po...
Page 10
8 6. Locate the closest available 12/24v socket and plug in the adapter. 7. Standing with the license plate in one hand and the camera in the other hand, slide the camera along the top of the license plate in order to determine the placement. Best placement is in the center of the license plate. If ...
Page 11: 5. Settings And Operation
9 power parking aid line / enter up menu down power on/off • the dash monitor will automatically turn on when it is connected to a power source. • hold the power button to turn on/off the unit if necessary. Parking aid line • you can turn on/off the parking aid line by pressing the parking aid line ...
Page 12
10 brightness and contrast you can adjust the contrast and brightness of the monitor according to your desired level. Note: contrast and brightness setting only works while the camera image is on the screen. To adjust brightness 1. Press “menu” 2. Go to “brightness” by pressing “– “ 3. Press “parkin...
Page 13
11 pairing the yada backup camera included is already paired with the monitor. If you can not see the camera image, pair the camera with the following steps: 1. Turn on your vehicle and place in reverse gear. This will power the monitor and the camera. 2. On the monitor: a. Press “menu” b. Go to “pa...
Page 14: 6. Safety Information
12 warning: a failure to read and follow these warnings and instructions may result in a serious accident, including damaged property or a serious injury, including loss of life. • the backup camera is designed as an aid to the driver in detecting large stationary objects to help avoid damaging the ...
Page 15
13 • do not strike the camera. It is a precision instrument. Otherwise, it may malfunction or cause damage resulting in a fire or an electric shock. • this product will only provide images of items that are within the field of view of the camera. Thus, it is imperative that the camera should be kept...
Page 16: 7. Maintenance & Warranty
14 cleaning • if dirt, rain or snow attaches to the camera, the monitor may not clearly display objects. If water droplets, snow or mud adhere to the camera lens, rinse with water and wipe with a dry cloth. • do not use alcohol, benzene or thinner to clean the camera. This will cause discoloration. ...
Page 17
15 defects in material and workmanship for 1 year from the date of original purchase. Where permitted by law, winplus north america’s liability shall be limited to that set forth in this limited express warranty. This limited express warranty shall be the exclusive remedy of the purchaser and winplu...
Page 18
16 note: toll free # is for north america customers only. See customer service section for customer contact numbers for other regions/offices. For customer service and technical support, please call us at 1.866.294.9244 or email us at customercare@winplususa.Com. If at that time it is determined tha...
Page 19
17 any liability for any losses (whether direct or indirect, in contract, tort or otherwise) incurred in connection with the backup camera, including but not limited to damaged property, personal injury and/or loss of life. Neither shall winplus north america and/or its affiliates have any liability...
Page 20
18 preferably in the original shipping box, and freight and insurance prepaid to the following address: attn: winplus bluetooth products returns unit 4, two counties estate, falconer road, haverhill, suffolk cb9 7xz, uk 3. Please include a detailed explanation of the problem you are having. 4. If yo...
Page 21: 8. General Information
19 customer service/contact for questions or issues regarding the product, please visit www.Letsyada.Com or contact winplus in your area/region to speak to our customer service representative: winplus north america tel.: 866-294-9244 tel.: 909-752-3074 winplus europe tel.: 44-1440-7138888 winplus au...
Page 22
20 • reorient or relocate the receiving antenna • increase the separation between the equipment and receiver • connect the equipment into an outlet on a circuit different from that to which the receiver is connected • consult the dealer or an experienced radio/tv technician for help this device comp...
Page 23
21 important note: fcc radiation exposure statement: this equipment complies with fcc radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying rf exposure compliance. This transmitter must not be co-located or opera...
Page 24
Ml -54 86 0_ v2 www.Winplus.Com www.Letsyada.Com © 2014 winplus north america inc. All rights reserved. Winplus, the logo design, and yada® are trademarks or registered trademarks of winplus north america inc. North america europe australia new zealand asia 820 south wanamaker avenue, ontario, ca 91...