Yaesu FT-2000D Manual

Page 112

FT-2000D O

PERATING

 M

ANUAL

M

ENU

 M

ODE

The Menu system of the FT-2000D provides extensive customization capability, so you can set up your transceiver just the

way you want to operate it. The Menu items are grouped by general utilization category, and are numbered from “001 AGc

001 AGc

001 AGc

001 AGc

001 AGc

FST DLY

FST DLY

FST DLY

FST DLY

FST DLY

” to “149 tGEn EMRGNCY

149 tGEn EMRGNCY

149 tGEn EMRGNCY

149 tGEn EMRGNCY

149 tGEn EMRGNCY

.”

U

SING

THE

 M

ENU

1. Press the [MENU] button momentarily, to engage the

Menu mode.

The Main (VFO-A) frequency display will show the

Menu Number and Menu Group name, while the Sub

(VFO-B) frequency display will show the Menu item;

the Multi-Display window shows the current setting of

the currently-selected Menu item.

2. Rotate the Main Tuning Dial knob to select the Menu

item you wish to work on.

3. Rotate the [SUB VFO-B] knob to change the current

setting of the selected Menu item.

A

DVICE

:

Press the [CLEAR] button momentarily to reset the

selected Menu item to the factory default value.

4. When you have finished making your adjustments,

press and hold in the [MENU] button for two seconds

to save the new setting and exit to normal operation. If

you only momentarily press the [MENU] button, the

new settings will not be retained.

Menu Mode Reset

You may reset all the Menu settings to their original factory defaults, if desired.

1. Turn the front panel [POWER] switch off.

2. Press and hold in the [MENU] button, and while holding it in, press the [POWER] switch to turn the transceiver

back on. Now release the [MENU] button.

Menu Number

Menu Group Name

Menu Item

Menu Setting

Main Tuning Dial Knob

[SUB VFO-B] Knob

[MENU] Button

[CLEAR] Button