Yaesu FT-8800 Reference - page 5
[SET] [LOW] [V/M] [HM] [SCN]
FT-8800 Reference
3
3. Rotate “Main” DIAL to select Memory Bank ("BANK1” ~
“BANK10") for the channel.
4. Press and hold the [SET] key until you hear a “beep” (about
1 second).
NOTE: The “BEEP” function must be turned on to hear the beep.
5. To return to normal Memory mode: press and hold [V/M]
key until current BANK appears, then rotate “Main” DIAL
clockwise until you see ALL.MEM; and, then momentarily
tap the [SET] key to exit.
CLEAR MEMORY BANK ASSIGNMENT
1. From the memory bank mode, recall the memory channel to
be cleared from the bank and recall the bank that is involved.
2. Press and hold [V/M] key for 1/2 second.
3. Press and hold [SET] key until you hear a “beep”. Display
will revert to lowest channel in the bank
MEMORY BANK RECALL
1. Radio to Memory mode by tapping the [V/M] key
momentarily, if necessary.
2. Press [V/M] key until ALL.MEM or current BANK
appears.
3. Rotate “Main” DIAL to select Memory Bank ("BANK 1 ~
“BANK10").
4. Tap the [SET] key momentarily to lock in selected bank.
SKIP A CHANNEL DURING MEMORY SCAN
1. Main band has Channel to be skipped.
2. Rotate “Main” DIAL to channel to be skipped.
3. Tap the [SET] key momentarily to enter set mode.
4. Rotate “Main” DIAL to Menu #37 (SKP.MSM)
5. Tap the “Main” DIAL momentarily, then rotate to “SKIP"
6
Tap the [SET] key momentarily twice to exit