Yaesu FTDX9000 - UPDATE V0518 AND V11.53 Update Manual

Page of 6

Download

Print this page

Bookmark us

11/30/09

PEP9000

This procedure is used to update Main CPU Ver.

0518

and EDSP Ver.

11.53

flash

programming for FTdx9000 Transceivers that have already been updated to

PEP9000.

*If you already have software Ver. 11.53 it is not necessary to update the FTdx9000 EDSP again.

IMPORTANT

This procedure is only needed under the below conditions:

• Must have the PEP9000 logo sticker on the radio below the serial number label.

PEP9000 Logo Sticker

• Must have MAIN CUP Version 0505 or higher or EDSP Version 11.24. While holding the three

buttons [GEN]＋[50]＋[ENT] turn the radio on and read the 7 digits on the top line of the LED

display. See page (6) for more detail instructions. If the software version is not immediately

displayed, your radio has not been updated to PEP9000; you must have the radio updated. Please

contact Vertex Standard, Amateur Tech Support.

If your radio meets the above conditions you may proceed to update the Main CPU to V0518

programming and EDSP to V11.53.

We recommend installing the Flash Programming Software on a PC computer with Windows 2000,

XP or Vista Operating System; and use the CT-119 programming cable or 8-pin mini-DIN PGM-SW

(P0091526) and serial cable RS-232C, DB9F to DB9F straight cable.

NOTE: There are many USB adapters available; however some may not function with this software.

We recommend using the latest USB adapter driver software when available.

The software updates will work with PEP9000 all versions (AF, AS, EU, NA, OC, SA or all Countries) of

the FTdx9000Contest, FTdx9000D and FTdx9000MP

The update software is available from our website at

http://www.yaesu.com

. The CT-119

programming cable is available from your authorized Vertex Standard dealer. You may also order

by email to Vertex Standard parts department,

1 2 3 4 5 6 Next › »

Summary of FTDX9000 - UPDATE V0518 AND V11.53

Page 1
11/30/09 pep9000 this procedure is used to update main cpu ver. 0518 and edsp ver. 11.53 flash programming for ftdx9000 transceivers that have already been updated to pep9000. *if you already have software ver. 11.53 it is not necessary to update the ftdx9000 edsp again. Important : this procedure i...
Page 2
Ver. 0518 main implements improvements (also includes all previous updates): • the cw memory keyer message text save is corrected. • the fh-2 [ ][ -> ] keys are made to increment the frequency at 100khz up or down. • cw carrier is corrected to change lsb ⇔ usb when the indication is changed on vfo b...
Page 3
Main cpu this procedure is used for uploading new software into the ftdx9000 amateur transceivers using the ct-119 program cable. If you have the 8-pin mini-din pgm-sw (p0091526) refer to the page 4. *don't forget to write down (or save to a cf card) any personal menu settings you have changed from ...
Page 4
(11) press and hold in the [fast] and [lock] keys while turning the radio back on. This resets the radio and locks in the new software. Turn the radio off. The updating process is now complete. Follow the instructions below to update the edsp. Edsp this procedure is used for uploading new edsp softw...
Page 5
4. While holding the [dnr]＋[cont] for the d or [nr]＋[cont] buttons for the contest and mp, press the front main power switch to turn the radio on. You will see [ dsp prg ] on the radio display. 5. On your computer desk top open pep9000_edsp folder and find the edsp-9000 icon as shown below. Double-c...
Page 6
The software versions can be displayed on the radio while holding the three buttons [gen]＋[50]＋[ent] turn the radio on. The software version will be displayed in the vfo-a window for 5 seconds then the radio will start up in normal operation. We hope this new software will increase your enjoyment of...

Summary of FTDX9000 - UPDATE V0518 AND V11.53

Page 1

Page 2

Page 3

Page 4

Page 5

Page 6