1. DL manuals
  2. Yaesu
  3. Transceiver
  4. FTM-10SR CODE
  5. Operating Manual

Yaesu FTM-10SR CODE Operating Manual

Other manuals for FTM-10SR CODE: Manual
Manual is about: VHF/UHF DUAL BAND FM TRANSCEIVER

Summary of FTM-10SR CODE

  • Page 1

    Vhf/uhf dual band fm transceiver ftm-10sr o perating m anual vertex standard co., ltd. 4-8-8 nakameguro, meguro-ku, tokyo 153-8644, japan vertex standard us headquarters 10900 walker street, cypress, ca 90630, u.S.A. Yaesu europe b.V. P.O. Box 75525, 1118 zn schiphol, the netherlands yaesu uk ltd. U...

  • Page 2: Contents

    Contents features ............................................................. 1 front panel & top panel ................................. 4 rear panel & lcd ........................................... 6 accessories & options ...................................... 8 supplied accessories ..............

  • Page 3: Ftm-10Sr O

    1 ftm-10sr o perating m anual new concept in ultra compact mobile transceivers the ultra small size and design of this radio gives you many choices for mounting and using this radio in your vehicle. The front panel may be separated from the main unit pro- viding many placement and mounting options e...

  • Page 4: Ftm-10Sr O

    2 ftm-10sr o perating m anual great new options to optimize your motor sports activities -- hands free operation with optional bluetooth ® headset-- when the optional bluetooth ® stereo headset is used with the optional bluetooth ® unit and charger sleeve, you can enjoy comfortable hands free operat...

  • Page 5: Ftm-10Sr O

    3 ftm-10sr o perating m anual advanced features to support many motor sport activities. U 500 memory channels with alpha-numeric labels. U high output audio amplifier and optional external loudspeaker. U the pa (public address) function permits communicating with a loud voice. U the intercom functio...

  • Page 6: Ftm-10Sr O

    4 ftm-10sr o perating m anual f ront p anel & t op p anel these keys select the following operations. • af dual feature (see page 25) • reverse (see page 29) • arts feature (see page 26) • scan operation (see page 30) • display dimmer (see page 27) • smart search operation (see page 30) • horn alert...

  • Page 7: Ftm-10Sr O

    5 ftm-10sr o perating m anual f ront p anel & t op p anel press this key to activate the function that is selected by the / keys. Key press and hold this key for two seconds to toggle the transceiver’s power on or off. Lock function: press this key momentarily while the transceiver is turned on to t...

  • Page 8: Ftm-10Sr O

    6 ftm-10sr o perating m anual r ear p anel & lcd connect an efficient 144/430 mhz an- tenna, which is adjusted to 50-ohm im- pedance. Use low-loss 50-ohm coaxial cable with type-m (pl259) connector. Ant jack you may connect an optional cab-1 bluetooth ® head set charger sleeve here. You may connect ...

  • Page 9: Ftm-10Sr O

    7 ftm-10sr o perating m anual r ear p anel this connector provides receiver audio output for an optional external speaker and connect an exter- nal audio source (such as the ipod ® ) to this connec- tor using the supplied “sp/line-in” cable. The audio impedance is 4 ohms, and the level varies accord...

  • Page 10: Ftm-10Sr O

    8 ftm-10sr o perating m anual s upplied a ccessories a ccessories & o ptions o ptional a ccessories sp/line-in cable (t9101568) speaker cable (t9101574) spare fuse (5 a) (q0000149) front panel bracket magnet front panel hanger connection cable (t9101577) hex wrench (s5000218) operating manual warran...

  • Page 11: Ftm-10Sr O

    9 ftm-10sr o perating m anual a ccessories & o ptions mmb-m10 multi-angle bracket yha-m10 vhf/uhf mobile antenna bu-1 bluetooth ® adapter unit cab-1 bluetooth ® headset charger sleeve fep-4 ear phone for bh-1 mmb-m11 handle bar bracket availability of accessories may vary in some regions. This produ...

  • Page 12: Ftm-10Sr O

    10 ftm-10sr o perating m anual i nstallation this chapter describes the installation procedure for integrating the ftm-10sr into a typi- cal amateur radio station. It is presumed that you possess technical knowledge and concep- tual understanding consistent with your status as a licensed radio amate...

  • Page 13: Ftm-10Sr O

    11 ftm-10sr o perating m anual i nstallation s afety i nformation the ftm-10sr is an electrical apparatus, as well as a generator of high rf (radio fre- quency) energy. You should exercise all safety precautions that are appropriate for this type of device. These safety tips apply to any device inst...

  • Page 14: Ftm-10Sr O

    12 ftm-10sr o perating m anual i nstallation m obile i nstallation the ftm-10sr must only be installed in vehicles having a 13.8 volt negative ground electrical system. Mount the transceiver where the display, controls, and microphone are easily accessible. The transceiver may be installed in almost...

  • Page 15: Ftm-10Sr O

    13 ftm-10sr o perating m anual ftm-10sr battery white:positive (+) black:negative (-) mobile power connections to minimize voltage drop and avoid blowing the vehicle’s fuses, connect the dc power cable directly to the battery terminals. Do not attempt to defeat or bypass the dc cable fuse - it is th...

  • Page 16: Ftm-10Sr O

    14 ftm-10sr o perating m anual b ase s tation i nstallation the ftm-10sr is ideal for base station use as well as in mobile installations. The ftm- 10sr is specifically designed to integrate into your station easily, using the following information as a reference. Ac power supplies operation of the ...

  • Page 17: Ftm-10Sr O

    15 ftm-10sr o perating m anual c able t ype rg-58a rg-58 foam rg-213 rg-8 foam belden 9913 times microwave lmr-400 7/8” “hardline” l oss : 144 mh z 6.5 4.7 3.0 2.0 1.5 1.5 0.7 l oss : 430 mh z > 10 8 5.9 3.7 2.9 2.6 1.3 a ntenna c onsiderations the ftm-10sr is designed for use with antennas presenti...

  • Page 18: Ftm-10Sr O

    16 ftm-10sr o perating m anual c onnection and s etting i nstallation 1. Connect the connection cable to the control jack of the transceiver body from the front panel. 2. Connect an efficient 144/430 mhz an- tenna, which is adjusted to 50-ohm impedance to the ant jack. Use low- loss 50-ohm coaxial c...

  • Page 19: Ftm-10Sr O

    17 ftm-10sr o perating m anual i nstallation c onnection and s etting use the external speaker speaker jack (black) 1. Connect the supplied “sp/line-in” cable to the sp/line-in jack of the transceiver body. 2. If you use the external stereo speaker, connect the external stereo speaker to the speaker...

  • Page 20: Ftm-10Sr O

    18 ftm-10sr o perating m anual i nstallation c onnection and s etting front panel installation use the supplied front panel bracket 1. Mount the supplied front panel bracket to any suitable position us- ing the supplied screws. 2. Connect the supplied front panel hanger using the supplied screw. 3. ...

  • Page 21: Ftm-10Sr O

    19 ftm-10sr o perating m anual i nstallation c onnection and s etting use the optional multi-angle bracket “mmb-m10” 1. If you use the front panel as a mi- crophone, connect the supplied front panel hanger using the supplied screw. 2. Mount the supplied front panel bracket to the “mmb-m10” using the...

  • Page 22: Ftm-10Sr O

    20 ftm-10sr o perating m anual i nstallation c onnection and s etting use the optional handle bar bracket “mmb-m11” 1. If you use the front panel as a mi- crophone, connect the supplied front panel hanger using the supplied screw. 2. If you do not use the front panel as a microphone, install the fro...

  • Page 23: Ftm-10Sr O

    21 ftm-10sr o perating m anual n ote.

  • Page 24: Ftm-10Sr O

    22 ftm-10sr o perating m anual r eceive 1. To turn the transceiver on, press and hold in the top panel [power] key for two sec- onds. When you turn the transceiver on, the applied dc voltage is displayed on the lcd for 2 seconds. Then the operating frequency will be displayed. To turn the transceive...

  • Page 25: Ftm-10Sr O

    23 ftm-10sr o perating m anual b asic o peration 3. Rotating the dial knob tunes the frequency in pre-programmed steps. Clockwise rota- tion of the dial knob will increase the frequency; counter-clockwise rotation will lower the operating frequency. 4. Press and hold in one of the front panel / keys...

  • Page 26: Ftm-10Sr O

    24 ftm-10sr o perating m anual display function af dual press the key to activate the af dual function which enables re- ceiving an amateur band signal while listening to the signal of an fm broadcast station at the same time. Arts press the key to activate the arts feature. Dimmer press the key to ...

  • Page 27: Ftm-10Sr O

    25 ftm-10sr o perating m anual af d ual f unction with the “af dual” function, it is possible to monitor your desired amateur band fre- quency while receiving am, fm broadcast or audio from the external input jack. You may select: am broadcast, fm broadcast, club channel or external line input, by c...

  • Page 28: Ftm-10Sr O

    26 ftm-10sr o perating m anual arts tm (default “off”) the arts feature uses dcs signaling to inform both parties when you and another arts equipped station are within communications range. This may be particularly useful during search and rescue situations, where it is important to stay in contact ...

  • Page 29: Ftm-10Sr O

    27 ftm-10sr o perating m anual d immer function you may adjust the display dimmer level. 1. Press the top panel / key to select “dimmer”. 2. Press the key. 3. Rotate the dial knob to select a comfortable brightness level. Dimmer 1 ÅÆ dimmer 2 ÅÆ dimmer 3 ÅÆ ÅÆ dimmer 4 ÅÆ dimmer 5 Å dim bright Æ 4. ...

  • Page 30: Ftm-10Sr O

    28 ftm-10sr o perating m anual i ntercom f unction intercom operation is possible with the ftm-10sr, by installing the optional bluetooth ® adapter unit “bu-1” in the radio and using the optional bluetooth ® headset “bh-1”. When operating in a very noisy environment, (for example, a loud exhaust or ...

  • Page 31: Ftm-10Sr O

    29 ftm-10sr o perating m anual p ublic a ddress feature the public address feature enables the output of your voice to the external speaker. When an optional mls-200-m10 external speaker is connected, the ftm-10sr allows the transceiver to be used as an 8 w public address system. 1. Press the top pa...

  • Page 32: Ftm-10Sr O

    30 ftm-10sr o perating m anual s mart m enu f eatures s can feature 1. Press the top panel / key to select “scan”. 2. Press the key to initiate upward scanning. When the scanner encounters a signal strong enough to open the squelch, the scanner will halt for five seconds, and then resume scanning. 3...

  • Page 33: Ftm-10Sr O

    31 ftm-10sr o perating m anual s mart m enu f eatures 6. To recall the smart search memories, just rotate the dial knob (or press the microphone’s [up]/[dwn] key) to choose from among the smart search memories. 7. Press the front panel key to return to vfo mode with the current frequency of the smar...

  • Page 34: Ftm-10Sr O

    32 ftm-10sr o perating m anual s mart m enu f eatures tcall (default “off” for usa version) you may enable tcall if the repeaters in your country require a 1750-hz burst tone for access. 1. Press the top panel / key to select “tcall”. 2. Press the key. The transmitter will automatically be activated...

  • Page 35: Ftm-10Sr O

    33 ftm-10sr o perating m anual m emory o peration many memory resources are available on the ftm-10sr. A total of 500 memories are available, and each may be appended with an alphanumeric label of up to eight characters, for quick channel recognition. The ftm-10sr has two methods of the memory mode;...

  • Page 36: Ftm-10Sr O

    34 ftm-10sr o perating m anual m emory r ecall once you have stored the desired memories, you may switch from “vfo” mode to “memory recall” mode, and operate on just the stored memory channels. The ftm-10sr has two methods of recalling the memory. (1) group memory mode en- ables you to recall all th...

  • Page 37: Ftm-10Sr O

    35 ftm-10sr o perating m anual m emory c hannel c ustomization the memory channel data can be customized using the following functions. M emory o peration no. M 1 m 2 m 3 m 4 m 5 m 6 m 7 m 8 m 9 m10 m11 m12 m13 display group mem ch mem sort mem tag scn type skiponly sql levl sql tsqf sql dcs sql typ...

  • Page 38: Ftm-10Sr O

    36 ftm-10sr o perating m anual m emory g roup b ank in the ftm-10sr, the memory channel is assigned to the group memory bank automati- cally. The group memory bank can be recalled by pressing the front panel / key (a “grp” notation appears at the upper left corner in the display for a moment.). You ...

  • Page 39: Ftm-10Sr O

    37 ftm-10sr o perating m anual m emory o peration m emory c hannel n umber c hange you may change the memory channel number to a desired vacant memory channel manu- ally. 1. Recall the memory channel on which you wish to change the memory channel number. 2. Press and hold the key to enter the memory...

  • Page 40: Ftm-10Sr O

    38 ftm-10sr o perating m anual l abeling m emory you may wish to append an alphanumeric “tag” (label) to a memory or memories, to aid in recollection of the channel’s use (such as a club name, etc.). This is easily accomplished using the set (menu) mode. 1. Recall the memory channel on which you wis...

  • Page 41: Ftm-10Sr O

    39 ftm-10sr o perating m anual s can t ype the ftm-10sr has two methods of performing memory channel scan; (1) all memory channel scanning and (2) scanning only memory channels which are selected via the skip/ preferential memory setting (see next step). 1. Press the front panel key to switch to the...

  • Page 42: Ftm-10Sr O

    40 ftm-10sr o perating m anual s quelch l evel the ftm-10sr allows setting the squelch threshold level. 1. Press the front panel key to switch to the memory mode, if needed. 2. Press and hold the key for one second to enter the memory channel customization mode. 3. Rotate the dial knob to select men...

  • Page 43: Ftm-10Sr O

    41 ftm-10sr o perating m anual dcs code the ftm-10sr enables you to change the dcs tone code. 1. Recall the memory channel on which you wish to change the dcs code. 2. Press and hold the key for one second to enter the memory channel customization mode. 3. Rotate the dial knob to select menu item “m...

  • Page 44: Ftm-10Sr O

    42 ftm-10sr o perating m anual s toring i ndependent t ransmit f requency (o dd s plit ) all memories can store an independent (in band) transmit frequency. The ftm-10sr has two methods of the storing independent transmit frequency; (1) using the standard repeater shift and (2) using the odd split m...

  • Page 45: Ftm-10Sr O

    43 ftm-10sr o perating m anual m emory o peration t ransmitter p ower l evel the ftm-10sr enables you to set the transmitter power level for each memory channel individually. 1. Recall the memory channel on which you wish to set the transmitter power level. 2. Press and hold the key for one second t...

  • Page 46: Ftm-10Sr O

    44 ftm-10sr o perating m anual the ftm-10sr has a special memory channel called “club channel”, and the following features can be handy. The “club channel” is displayed at the first of the group memory bank and “clb” is indicated when the channel is re- called. The club channel can also be reprogram...

  • Page 47: Ftm-10Sr O

    45 ftm-10sr o perating m anual watched periodically, and the signal on the “club channel” is received. When “club channel” function is activated, a noise may be heard every time the “club channel” is watched (once per 3 seconds). This noise is caused by checking the “club channel” for any signals. T...

  • Page 48: Ftm-10Sr O

    46 ftm-10sr o perating m anual while operating on the club channel, a message (up to 16 characters) can be sent, instead of sending a voice. 20 kinds of messages can be programmed, and one of them can be selected and transmitted with your id. Note: the message feature requires that all members (1) u...

  • Page 49: Ftm-10Sr O

    47 ftm-10sr o perating m anual m essage f eature p rogramming a m ember l ist (requires all members set the same member list (includes own id) into the same member box in the same order.) it is possible to register a maximum of 20 persons, in order to identify the sender. When you receive a message ...

  • Page 50: Ftm-10Sr O

    48 ftm-10sr o perating m anual c loning the m essage it is possible to copy/duplicate the programmed messages, and all the ids of the members, when using the “message” function. If messages (max 20 messages) and ids (max 20 persons) are programmed in only one transceiver (ftm-10sr), the information ...

  • Page 51: Ftm-10Sr O

    49 ftm-10sr o perating m anual s et your p ersonal id to choose your personal id from the member list. 1. Press and hold the [vol/sel] key for one second to activate the menu mode. When the display indicates the clock, stop watch timer, or temperature, press the [vol/sel] key to change to the vfo or...

  • Page 52: Ftm-10Sr O

    50 ftm-10sr o perating m anual m essage f eature when the club channel monitor feature is activated, steps 1 and 2 above are not necessary. 3. Press the top panel or key to select the message you wish to send. 4. Press the top panel key to transmit the selected message on the club channel fre- quenc...

  • Page 53: Ftm-10Sr O

    51 ftm-10sr o perating m anual m essage f eature cloning 1. Bring the source transceiver and the destination transceiver as close to each other as possible. . 2. Press the top panel’s ptt key on the source transceiver. While transmitting the clone data, the source transceiver’s led blinks red and bl...

  • Page 54: Ftm-10Sr O

    52 ftm-10sr o perating m anual c hanging the c lub c hannel frequency by factory default, the 439.900 mhz (exp version:433.500 mhz) frequency is stored in the club channel. If you wish to change the club channel, perform the following steps. Advice: for the “club channel”, any frequency in the 144 m...

  • Page 55: Ftm-10Sr O

    53 ftm-10sr o perating m anual the ftm-10sr has a 24-hour clock (accuracy: ±30 sec/month). With the clock/timer, you may operate the following features: p clock feature: display the current time. P stop watch timer feature. S et up the c lock 1. Press and hold the [vol/sel] key for one second to act...

  • Page 56: Ftm-10Sr O

    54 ftm-10sr o perating m anual d isplays the c urrent t ime activate the clock 1. Press and hold the [vol/sel] key for one second to activate the menu mode. 2. Rotate the dial knob to select menu item “f9 clock”. 3. Press the key to enable selection of this menu item. 4. Rotate the dial knob to sele...

  • Page 57: Ftm-10Sr O

    55 ftm-10sr o perating m anual c lock /t imer o peration u sing the s top w atch t imer the stop watch provides several timing functions for your convenience at motor sports and rallies. To operate the stop watch timer, first activate a clock function via the menu mode “f9 clock ”. 1. Press the [vol...

  • Page 58: Ftm-10Sr O

    56 ftm-10sr o perating m anual mute feature press and hold the [vol/sel] key for one second to mute the receiver audio volume temporarily, without touching the volume (dial) knob. (the ftm-10sr will shift to the menu mode) to disable the mute feature, press the [vol/sel] key momentarily. Lock press ...

  • Page 59: Ftm-10Sr O

    57 ftm-10sr o perating m anual c onvenience f eatures af-vfo feature by default, the volume control (dial knob) and clock display do not return to the fre- quency control automatically when you leave an interval of approximately three seconds. You may change the status of the dial knob so that the d...

  • Page 60: Ftm-10Sr O

    58 ftm-10sr o perating m anual vox s ensitivity you may select the vox sensitivity. 1. Press and hold the [vol/sel] key for one second to activate the menu mode. 2. Rotate the dial knob to select menu item “f47 vox sens”. 3. Press the key to enable selection of this menu item. 4. Rotate the dial kno...

  • Page 61: Ftm-10Sr O

    59 ftm-10sr o perating m anual the ftm-10sr enables you to output the audio signal from the external audio equipment such as an ipod ® to the speaker. You may operate on the amateur band while listening to your favorite music. 1. Turn off the ftm-10sr and external audio equipment. 2. Connect the sup...

  • Page 62: Ftm-10Sr O

    60 ftm-10sr o perating m anual installation of the optional bu-1 bluetooth ® adapter unit will enable, the ftm-10sr to send/receive voice messages with the optional bh-1 bluetooth ® headset via wireless links. Pairing when using the bluetooth ® headset for the first time, the bluetooth ® headset and...

  • Page 63: Ftm-10Sr O

    61 ftm-10sr o perating m anual bluetooth ® o peration to activate bluetooth ® : 1. Press and hold the [vol/sel] key for one second to activate the menu mode. 2. Rotate the dial knob to select menu item “f8 blu vox”. 3. Press the key to enable selection of this menu item. 4. Rotate the dial knob to s...

  • Page 64: Ftm-10Sr O

    62 ftm-10sr o perating m anual the af dual function allows you to monitor your desired amateur band frequency while listening to an am broadcast station. You may monitor the fm broadcast station or external line input instead of an am broad- cast station by changing menu item “f2 af dual” (the facto...

  • Page 65: Ftm-10Sr O

    63 ftm-10sr o perating m anual af d ual f unction li hold : you may monitor an amateur band frequency while listening to the line audio. When a signal is received on the amateur band, the audio will be output to the speaker. When the amateur band signal drops, the ftm-10sr will remain in the amateur...

  • Page 66: Ftm-10Sr O

    64 ftm-10sr o perating m anual many repeater systems require that a very-low-frequency audio tone be superimposed on your fm carrier in order to activate the repeater. This helps prevent false activation of the repeater by radar or spurious signals from other transmitters. This tone system, called “...

  • Page 67: Ftm-10Sr O

    65 ftm-10sr o perating m anual dcs o peration another form of tone access control is digital code squelch, or dcs. It is a newer, more advanced tone system that generally provides more immunity from false paging than does ctcss. The dcs encoder/decoder is built into your ftm-10sr, and operation is v...

  • Page 68: Ftm-10Sr O

    66 ftm-10sr o perating m anual the ftm-10sr includes an enhanced ctcss tone encoder/decoder and a dedicated mi- croprocessor providing paging and selective calling features. This allows you to place a call to a specific station (paging), and to receive calls of your choice directed only to you (code...

  • Page 69: Ftm-10Sr O

    67 ftm-10sr o perating m anual epcs (e nhanced p aging & c ode s quelch ) o peration a ctivating the epcs 1. Press and hold the [vol/sel] key for one second to activate the menu mode. 2. Rotate the dial knob to select menu item “f21 pager”. 3. Press the key to enable selection of this menu item. 4. ...

  • Page 70: Ftm-10Sr O

    68 ftm-10sr o perating m anual the ftm-10sr can be used to access a “node” (repeater or base station), which is tied into the vertex standard wires tm (wide-coverage internet repeater enhancement system) network. Details may be found at the wires-ii web site: http://www.Vxstd.Com/en/ wiresinfo-en/. ...

  • Page 71: Ftm-10Sr O

    69 ftm-10sr o perating m anual i nternet c onnection f eature (wires tm ) frg (“f riendly r adio g roup ”) mode you may access other internet link systems (including wires tm in the “frg” mode) that use a dtmf string for access. Programming the frg code load the dtmf tones that you wish to use for i...

  • Page 72: Ftm-10Sr O

    70 ftm-10sr o perating m anual to accessing an frg node 1. Press and hold the [vol/sel] key for one second to activate the menu mode. 2. Rotate the dial knob to select menu item “f48 wires”. 3. Press the key to enable selection of this menu item. 4. Rotate the dial knob until “mem” appears on the di...

  • Page 73: Ftm-10Sr O

    71 ftm-10sr o perating m anual dtmf a utodialer nine autodialer memories are available on the ftm-10sr. These dtmf autodialer memo- ries can store up to 16 digits of a telephone number for repeater autopatch or other use. To load the dtmf autodialer memories: 1. Press and hold the [vol/sel] key for ...

  • Page 74: Ftm-10Sr O

    72 ftm-10sr o perating m anual to transmit the memorized telephone number: 1. Press the ptt key, then press and hold the key while transmitting. The “dt mem” indication will appear in the display for a moment (thus enabling the dtmf autodial), and “ ” icon will appear in the display. 2. Press the ke...

  • Page 75: Ftm-10Sr O

    73 ftm-10sr o perating m anual r epeater o peration the ftm-10sr includes a host of convenient features that makes operation on amateur repeaters both efficient and enjoyable. The ftm-10sr offers three methods of setting up split-frequency operation on repeaters: manual selection of preset repeater ...

  • Page 76: Ftm-10Sr O

    74 ftm-10sr o perating m anual r epeater o peration /b and e xpansion automatic repeater shift the ars (automatic repeater shift) feature in this transceiver allows easy and convenient repeater operation by automatically activating the repeater shift function whenever you tune to a frequency in a st...

  • Page 77: Ftm-10Sr O

    75 ftm-10sr o perating m anual w eather b roadcast c hannel o peration the vhf weather broadcast station memory channel bank has been pre-programmed at the factory, for quick selection of noaa weather information stations. 1. Press the front panel / key to recall the weather broadcast station memory...

  • Page 78: Ftm-10Sr O

    76 ftm-10sr o perating m anual m iscellaneous s etting c hannel s tep s election tuning steps are factory preset to default increments which are appropriate for the country to which this radio is exported. You may have a reason to use a different step size, however, and here is the procedure for cha...

  • Page 79: Ftm-10Sr O

    77 ftm-10sr o perating m anual m iscellaneous s etting ptt key function you can select the ptt key function desired. 1. Press and hold the [vol/sel] key for one second to activate the menu mode. 2. Rotate the dial knob to select menu item “f23 ptt mode”. 3. Press the key to enable selection of the p...

  • Page 80: Ftm-10Sr O

    78 ftm-10sr o perating m anual m iscellaneous s etting r epeater s hift d irection you may select the repeater shift direction. 1. Press and hold the [vol/sel] key for one second to activate the menu mode. 2. Rotate the dial knob to select menu item “f25 rpt mode”. 3. Press the key to enable selecti...

  • Page 81: Ftm-10Sr O

    79 ftm-10sr o perating m anual m iscellaneous s etting p rogramming the k ey a ssignments in the factory default, the optional mh-68 a6j /mh-68 b6j microphone’s [pgm] key func- tions have been assigned to the “wx ch”. This may be changed by the user if you wish to assign quick access to another func...

  • Page 82: Ftm-10Sr O

    80 ftm-10sr o perating m anual m iscellaneous s etting s canning b and by default, the ftm-10sr considers the 144 mhz amateur band and 430 mhz amateur band to be independent bands while the scanner is activated. You may change scanner operation so that both the 144 mhz amateur band and the 430 mhz a...

  • Page 83: Ftm-10Sr O

    81 ftm-10sr o perating m anual m iscellaneous s etting s can d irection by default, the vfo frequency will jump to the low band edge of the current band when the vfo frequency reaches the high band edge. You may change the scanner operation so that the vfo frequency will change to downward scanning ...

  • Page 84: Ftm-10Sr O

    82 ftm-10sr o perating m anual s plit t one o peration the ftm-10sr can be operated in a “split tone” configuration, to enable operation on repeaters using a mix of both ctcss and dcs control. 1. Press and hold the [vol/sel] key for one second to activate the menu mode. 2. Rotate the dial knob to se...

  • Page 85: Ftm-10Sr O

    83 ftm-10sr o perating m anual b attery v oltage d isplay you can display the vehicle's battery voltage on the display at any time. 1. Press and hold the [vol/sel] key for one second to activate the menu mode. 2. Rotate the dial knob to select menu item “f11 dc volt”. 3. Press the key to display the...

  • Page 86: Ftm-10Sr O

    84 ftm-10sr o perating m anual t ime s ystem you may select the time system between “12h” and “24h” via the menu mode. 1. Press the [vol/sel] key repeatedly to display the clock, stop watch timer, or ther- mometer. The display returns to the frequency display automatically if you leave an interval o...

  • Page 87: Ftm-10Sr O

    85 ftm-10sr o perating m anual a utomatic p ower -o ff (apo) the “automatic power-off” (apo) feature will turn the radio completely off after a user- defined period of ptt or key/button inactivity. If you do not press any front panel keys or buttons, rotate the dial knob, use the microphone’s keys a...

  • Page 88: Ftm-10Sr O

    86 ftm-10sr o perating m anual v olume s etting a lert feature the ftm-10sr provides the volume setting alert feature. 1. Press and hold the [vol/sel] key for one second to activate the menu mode. 2. Rotate the dial knob to select menu item “f4 af prest”. 3. Press the key to enable selection of this...

  • Page 89: Ftm-10Sr O

    87 ftm-10sr o perating m anual s tereo /m onaural s election you may enjoy the fm broadcast and external audio input in stereo output. 1. Press and hold the [vol/sel] key for one second to activate the menu mode. 2. Rotate the dial knob to select menu item “f42 stereo”. 3. Press the key to enable se...

  • Page 90: Ftm-10Sr O

    88 ftm-10sr o perating m anual the ftm-10sr menu mode, already described in parts of many previous chapters, is easy to activate and set. It may be used for configuration of a wide variety of transceiver param- eters, some of which have not been detailed previously. Use the following procedure to ac...

  • Page 91: Ftm-10Sr O

    89 ftm-10sr o perating m anual m enu (“s et ”) m ode menu item rpt sft rx exp rx f ccl rx m mod scn cvrg scn drct scn mode scn strt speaker sql bell sql dcs sql exp sql levl sql tsqf sql type step stereo tot tx power vol.Itcom vox mic vox sens wires wx alert function sets the magnitude of the repeat...

  • Page 92: Ftm-10Sr O

    90 ftm-10sr o perating m anual r epeater s etting enables/disables the automatic repeater shift function. Sets the repeater shift direction. Sets the magnitude of the repeater shift. Ctcss/dcs/dtmf s etting programming of the dtmf autodialer. Enables/disables the enhanced ctcss paging & code squelch...

  • Page 93: Ftm-10Sr O

    91 ftm-10sr o perating m anual m enu (“s et ”) m ode Ú Ú Ú Ú Ú : depends on the band of operation. S witch /k nob s etting enables/disables the beeper. Selects the category which is recalled from the top panel / key. Assigns a function to the function key. Select the function of the microphone’s [pg...

  • Page 94: Ftm-10Sr O

    92 ftm-10sr o perating m anual m enu (“s et ”) m ode set mode item [f1 af auto f1 af auto f1 af auto f1 af auto f1 af auto] function: enables/disables the automatic audio volume controller. Available values: off/on min/on mid/on max default: off on min : activates the automatic audio volume controll...

  • Page 95: Ftm-10Sr O

    93 ftm-10sr o perating m anual m enu (“s et ”) m ode set mode item [f3 af pitch f3 af pitch f3 af pitch f3 af pitch f3 af pitch] function: select the tone pitch control for the received audio. Available values: low-3/low-2/low-1/normal/high-1/high-2 default: normal set mode item [f4 af prest f4 af p...

  • Page 96: Ftm-10Sr O

    94 ftm-10sr o perating m anual m enu (“s et ”) m ode set mode item [f8 blu vox f8 blu vox f8 blu vox f8 blu vox f8 blu vox ] function: enables/disables the bluetooth ® function (requires the optional bu-1 bluetooth ® unit). Available values: off/ptt/vox high/vox low default: ptt off : disable the bl...

  • Page 97: Ftm-10Sr O

    95 ftm-10sr o perating m anual m enu (“s et ”) m ode set mode item [f15 fkey sel f15 fkey sel f15 fkey sel f15 fkey sel f15 fkey sel] function: assigns a function to the function key. Available values: af dual, arts, dimmer, horn 1, horn 2, horn 3, horn 4, intercom, moni, pa, reverse, scan, sql levl...

  • Page 98: Ftm-10Sr O

    96 ftm-10sr o perating m anual m enu (“s et ”) m ode set mode item [f24 rpt ars f24 rpt ars f24 rpt ars f24 rpt ars f24 rpt ars ] function: enables/disables the automatic repeater shift function. Available values: on/off default: on set mode item [f25 rpt mode f25 rpt mode f25 rpt mode f25 rpt mode ...

  • Page 99: Ftm-10Sr O

    97 ftm-10sr o perating m anual m enu (“s et ”) m ode set mode item [f30 scn cvrg f30 scn cvrg f30 scn cvrg f30 scn cvrg f30 scn cvrg ] function: selects the scan range. Available values: in band/ham band default: in band in band : the ftm-10sr considers the 144 mhz amateur band and 430 mhz ama- teur...

  • Page 100: Ftm-10Sr O

    98 ftm-10sr o perating m anual m enu (“s et ”) m ode set mode item [f34 speaker f34 speaker f34 speaker f34 speaker f34 speaker ] function: select the speaker to be used. Available values: rear/f+r/front/off default: front rear : outputs the receiving audio from the “sp/line-in” connector (located i...

  • Page 101: Ftm-10Sr O

    99 ftm-10sr o perating m anual m enu (“s et ”) m ode set mode item [f39 sql tsqf f39 sql tsqf f39 sql tsqf f39 sql tsqf f39 sql tsqf ] function: setting of the ctcss tone frequency. Available values: 50 standard ctcss tones default: 100.0 hz set mode item [f40 sql type f40 sql type f40 sql type f40 ...

  • Page 102: 100

    100 ftm-10sr o perating m anual set mode item [f45 vol.Itcom f45 vol.Itcom f45 vol.Itcom f45 vol.Itcom f45 vol.Itcom] function: sets the volume level of the intercom mode. Available values: ivol hi/ivol low default: ivol hi set mode item [f46 vox mic f46 vox mic f46 vox mic f46 vox mic f46 vox mic] ...

  • Page 103: 101

    101 ftm-10sr o perating m anual a ppendix mh-68 b6j m icrophone (o ption ) ptt switch press this switch to transmit, and release it to receive. Dwn/up keys press (or hold in) either of these keys to tune (or scan up or down) the operating frequency or through the memory chan- nels. In many ways, the...

  • Page 104: 102

    102 ftm-10sr o perating m anual i nstallation of o ptional a ccessories m icrophone j ack “mek-m10” connector connect wires 1. Remove the two screws affixing the microphone jack cover, and then re- move the microphone jack cover from the front panel. 3. Attach the “mek-m10” to the front panel using ...

  • Page 105: 103

    103 ftm-10sr o perating m anual i nstallation of o ptional a ccessories bu-1 bluetooth ® a dapter u nit please be sure to follow these safety precautions: p turn the transceiver power off, and disconnect all cables from the transceiver. P touch a metal place to discharge any static electricity from ...

  • Page 106: 104

    104 ftm-10sr o perating m anual i nstallation of o ptional a ccessories 1. Peel off the blind seal on the front panel. Peel off the blind seal cab-1 bluetooth ® h ead s et c harger s leeve 2. Attach the “cab-1” to the front panel using the supplied two screws..

  • Page 107: 105

    105 ftm-10sr o perating m anual static electricity may occasionally cause erratic or unpredictable operation of the micropro- cessor. If this happens, resetting of the microprocessor may restore normal operation. Note that resetting the microprocessor will erase all memories. 1. Turn the radio off. ...

  • Page 108: 106

    106 ftm-10sr o perating m anual the led at the left side of the dial knob blinks in yellow p the volume setting alert feature is turned on. Set the menu item “f4 af prest” to “off”. See page 86 receiver audio volume level changes automatically p the automatic audio volume controller is turned on. Se...

  • Page 109: 107

    107 ftm-10sr o perating m anual s pecifications general frequency range: rx: 0.5 - 1.8 mhz (am bc) 76 - 108 mhz (fm bc) 108-137 mhz (air band) 137-174 mhz (144 mhz ham) 174-222 mhz (gr1 vhf tv) 300-420 mhz (gr2 ) 420-470 mhz (430 mhz ham) 470-800 mhz (gr1 uhf tv) 800-999 mhz (gr2 usa cellular blocke...

  • Page 110: 108

    108 ftm-10sr o perating m anual receiver circuit type: fm / am: double-conversion super heterodyne wfm: triple-conversion super heterodyne am / fm radio:single-conversion super heterodyne intermediate frequencies: fm / am: 1st: 47.25 mhz, 2nd: 450 khz wfm: 1st: 45.8 mhz, 2nd: 10.7mhz, 3rd: 1mhz fm r...

  • Page 111

    1. Changes or modifications to this device not expressly approved by vertex standard could void the user’s authorization to operate this device. 2. This device complies with part 15 of the fcc rules. Operation is subject to the following two conditions; (1) this device may not cause harmful interfer...

  • Page 112

    Copyright 2007 vertex standard co., ltd. All rights reserved. No portion of this manual may be reproduced without the permission of vertex standard co., ltd. Printed in japan e h 0 3 0 m 1 0 2.