Yakima SlimShady Installation Instructions Manual - Removal
REMOVAL
2
Fully open
both clamps.
1
Remove the SlimShady.
• Remove your awning and Yakima
Rack before entering an automated
car wash.
• Do not use fuel burning, oxygen
consuming devices under the
awning. This includes: candles, gas
lanterns, kerosene lamps, stoves,
cooking and heating appliances.
• Do not open the awning near a camp
fire or any other flame source.
• Inspect mounting hardware of
awning before driving away.
IMPORTANT WARNINGS
Rack Installation
Improperly mounted roof racks and
awnings can come loose during travel
and cause serious accidents! Installation,
handling and use must be carried out in
accordance with product and Roof-Rack
instructions.
Check attachment hardware and load for
tight fit and function:
• Before driving away.
• After driving a short distance,
following awning install.
• At regular intervals on longer trips.
• Every two hours on bad terrain.
Vehicle Driving and Regulations
The speed driven must be suited to the
load transported and to official speed
limits.
When transporting any load, the speed
of the vehicle must take into account all
conditions such as the state of the road,
the surface of the road, traffic conditions,
wind, etc. Vehicle handling, cornering,
braking and sensitivity to side winds will
change with the addition of roof top loads.