Summary of 4202
Page 1
Yale 4202 2 wire video intercom system user manual ydv4202-v1.
Page 2
Ydv4202-v1 power unit 1. Warning - don’t dismantle or alter the unit. Fire or electric shock could result. - the unit must be installed and wired by a qualified technician. - do not connect any non specified power source to the n, l terminals, fire, damage to the unit, or system malfunciont can resu...
Page 3
Ydv4202-v1 input voltage: 100~240vac input frequency: 50~60hz rated output voltage: dc 28v+/-2v rated output current: 1.5a working temperature: -10 0 c~50 0 c sw port input voltage: max.230vac, 2a dimension: 140*90*60mm 4. Mounting: step1: mount the din rail to the wall with screws ; step2: pull dow...
Page 4
Ydv4202-v1 exterior unit 1.Parts and functions rain cover camera lens night view led speaker nameplate call button microphone 90 mm 176 mm 23 mm 2.Terminal descriptions 1 2 on 1 2 on mic adjustment lock control jumper doorstation code dip main connect port 1 2 3 spk adjustment bus pl s1+ s2+ s-.
Page 5
Ydv4202-v1 • lock control jumper: not to be removed • doorstation code dip: to be used when additional exterior units are used in the same system. • main connect port: to connect the interior monitor and electornic lock/s. Bus: connection to interior monitor, no polarity. Pl: external lock power inp...
Page 6
Ydv4202-v1 5. Placing name label remove the plastic cover to open the transparent name label holder, cut a paper to size print name. Insert paper on to name holder re insert plast cover back to the panel name label 1 2 on backside 6. Adjusting camera angle use a screwdriver to loosen the screw. Adju...
Page 7
Ydv4202-v1 7. Basic wiring (with electronic lock) - + ac~ monitor 1 2 o n bus pls1+ s2+ s- bus(im) bus(ds) bus(im) bus(ds) use supplied plugs to connect exterior unit to power unit, and power unit ot interior monitor..
Page 8
Ydv4202-v1 interior monitor introduction the monitor is designed with a 4 inch screen, it provides a resolution of 320x240 pixels with high quality image display, and it is equipped with a handset to communicate - the touch sensitive button makes the operation easy. Parts and function l1,l2: bus ter...
Page 9
Ydv4202-v1 about main menu the main menu is your starting point for using all the applications on your monitor. You can customize your main menu to display applications, logos, and languages. To open the main menu page, tap menu key one time on the monitor. Basic operation instruction answering a do...
Page 10: Intercom Function
Ydv4202-v1 intercom function intercom function can be initiated by any monitor when multi monitors are installed. When the monitor is in standby mode, pick up handset, the intercom menu will be highlighted in the main menu page. Press menu button to enter. Intercom call: user in one apartment can ca...
Page 11: Basic Setup Instruction
Xt ydv4202-v1 basic setup instruction ring tone setting select user setup item on main menu page to enter setup page. Select door station call tone , intercom call tone or door bell tone menu. There are 12 ring tone that can be selected. Use / button to select last/next ring tone, press menu button ...
Page 12: Screen Setting
Ydv4202-v1 screen setting during a c a l l o r w h e n monitoring ouside, press menu button, the adjust menu will be displayed. Use / button to select the adjust menu item, use m e n u button to change values. Scene brightly bright 6 color 6 select camera ... Select item exit inc • the item is scene...
Page 13
Ydv4202-v1 how to set the unlock parameter unlock time: how to set the monitor as a guard monitor a monitor can be assigned as guard unit monitor. A call can be placed directly to the guard unit monitor, bypassing the intercom menu. The code 8004 is used to set the monitor as a guard unit monitor an...
Page 14
Ydv4202-v1 the monitor can be set to control 2 locks while you should set the unlock2 item to "on " state. The code number of 8015 is used to set the unlock2 off. This setting is for only one lock. The code number of 8014 is used to set the unlock2 on. This setting is to control two locks. 2 locks c...
Page 15
Ydv4202-v1 how to set the address for monitor each monitor should be assigned an address in the system, total 32 address- es can be assigned. Code numbers from 8200 to 8231 are used as address input no. User code input no. User code input no. User code 8200 code=0 8211 code=11 8222 code=22 8201 code...
Page 16
Ydv4202-v1 • power supply: dc 24v • power consumption: standby 6ma; working status 194ma • monitor screen: 4 inch color lcd • display resolutions: 320(r, g, b) x 240 pixels • video signal: 1vp-p, 75Ω, ccir standard • wiring: 2 wires, non-polarity • dimension: 186(h)×190(w)×26(d)mm precautions 1) all...