Yale 8880 Installation Instructions

Summary of 8880

  • Page 1

    8800 series electrified mortise solenoid locks installation instructions ® for technical assistance call yale at 1-800-810-wire (9473) instructions for wiring 8800 series electrified mortise solenoid locks, 8800 series monitoring suffixes rex, lbm & dbm & combined solenoid & monitoring suffixes with...

  • Page 2

    Introduction this instruction manual includes wiring instructions for all electrical types of 8800 series electric mortise locks to electrolynx hinge connector system. The correct wiring configuration must be selected depending on type and function of the mortise lock being installed. Multiple funct...

  • Page 3

    C option a sample wiring 8880 thru 8899 series solenoid locks with a 12 or 24vdc regulated and filtered supply (wiring shows power on and lock in secure state) power no pigtail harness (supplied with mckinney hinge) (2 wires with 8-pin connector) l n input 120vac 60hz + - 12 or 24vdc regulated and f...

  • Page 4

    Rex lbm lpm dbm db db-in db-out dps cx * deadbolt not available with dps function. Door position sensor cylinder monitor references request to exit latch bolt monitor latch performance monitor deadbolt motintor electrified options deadbolt deadbolt retracted deadbolt extended ® molex 8-pin function ...