1. DL manuals
  2. Yamaha
  3. Motorcycle
  4. 2011 YZF-R1B
  5. Owner's Manual

Yamaha 2011 YZF-R1B Owner's Manual

Summary of 2011 YZF-R1B

  • Page 1

    Dic183 yzf-r1 owner’s manual read this manual carefully before operating this vehicle. 1kb-28199-e0 [english (e)].

  • Page 2

    Eau50920 read this manual carefully before operating this vehicle. This manual should stay with this vehicle if it is sold. General manager of quality assurance div. Date of issue: 1 aug. 2002 place of issue: shizuoka, japan declaration of conformity yamaha motor electronics co., ltd. 1450-6, mori, ...

  • Page 3

    Introduction eau10102 welcome to the yamaha world of motorcycling! As the owner of the yzf-r1, you are benefiting from yamaha’s vast experience and newest technology regarding the design and manufacture of high-quality products, which have earned yamaha a reputation for dependability. Please take th...

  • Page 4

    Important manual information eau10133 particularly important information is distinguished in this manual by the following notations: *product and specifications are subject to change without notice. This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey a...

  • Page 5

    Important manual information eau10200 yzf-r1 owner’s manual ©2011 by yamaha motor co., ltd. 1st edition, july 2011 all rights reserved. Any reprinting or unauthorized use without the written permission of yamaha motor co., ltd. Is expressly prohibited. Printed in japan. U1kbe0e0.Book page 2 monday, ...

  • Page 6

    Table of contents safety information ..................1-1 description ..................................2-1 left view ..........................................2-1 right view ........................................2-2 controls and instruments.................2-3 instrument and control functions .....

  • Page 7

    Table of contents lubricating the swingarm pivots .........................................6-29 checking the front fork .................6-30 checking the steering ...................6-30 checking the wheel bearings .......6-31 battery ..........................................6-31 replacing the fus...

  • Page 8

    1-1 1 safety information eau10289 be a responsible owner as the vehicle’s owner, you are respon- sible for the safe and proper operation of your motorcycle. Motorcycles are single-track vehicles. Their safe use and operation are de- pendent upon the use of proper riding techniques as well as the exp...

  • Page 9

    Safety information 1-2 1 due to excessive speed or under- cornering (insufficient lean angle for the speed). • always obey the speed limit and never travel faster than warrant- ed by road and traffic conditions. • always signal before turning or changing lanes. Make sure that other motorists can see...

  • Page 10

    Safety information 1-3 1 ● do not run engine in poorly venti- lated or partially enclosed areas such as barns, garages, or car- ports. ● do not run engine outdoors where engine exhaust can be drawn into a building through openings such as windows and doors. Loading adding accessories or cargo to you...

  • Page 11

    Safety information 1-4 1 aftermarket parts, accessories, and modifications while you may find aftermarket prod- ucts similar in design and quality to genuine yamaha accessories, recog- nize that some aftermarket accessories or modifications are not suitable be- cause of potential safety hazards to y...

  • Page 12

    Safety information 1-5 1 ● check that the fuel cock (if equipped) is in the “off” position and that there are no fuel leaks. ● point the front wheel straight ahead on the trailer or in the truck bed, and choke it in a rail to pre- vent movement. ● shift the transmission in gear (for models with a ma...

  • Page 13

    Description 2-1 2 eau10410 left view 1,2 3 4,5,6 13 12 11 10 7,8 9 1. Front fork spring preload adjusting bolt (page 3-30) 2. Front fork compression damping force adjusting screw (page 3-30) 3. Coolant reservoir (page 6-14) 4. Fuel injection system fuse (page 6-33) 5. Main fuse (page 6-33) 6. Fuse b...

  • Page 14

    Description 2-2 2 eau10420 right view 1,2,3 4 9 5,6 7 8 10 11 12 13 1. Storage compartment (page 3-29) 2. Luggage strap holder (page 3-34) 3. Helmet holder (page 3-28) 4. Seat lock (page 3-27) 5. Battery (page 6-31) 6. Owner’s tool kit (page 6-2) 7. Fuel tank cap (page 3-24) 8. Front fork rebound da...

  • Page 15

    Description 2-3 2 eau10430 controls and instruments 1 2 3 6 5 7 8 9 4 1. Clutch lever (page 3-20) 2. Left handlebar switches (page 3-18) 3. Main switch/steering lock (page 3-3) 4. Multi-function meter unit (page 3-9) 5. Hazard switch (page 3-19) 6. Front brake fluid reservoir (page 6-23) 7. Right ha...

  • Page 16

    Instrument and control functions 3-1 3 eau47632 d-mode (drive mode) d-mode is an electronically controlled engine performance system with three mode selections (“std”, “a”, and “b”). Push the drive mode switch “mode” to switch between modes. (see page 3-19 for an explanation of the drive mode switch...

  • Page 17

    Instrument and control functions 3-2 3 ● an immobilizer system indicator light (see page 3-9.) the key with the red bow is used to reg- ister codes in each standard key. Since re-registering is a difficult process, take the vehicle along with all three keys to a yamaha dealer to have them re-reg- is...

  • Page 18

    Instrument and control functions 3-3 3 eau10472 main switch/steering lock the main switch/steering lock controls the ignition and lighting systems, and is used to lock the steering. The various positions are described below. Tip be sure to use the standard key (black bow) for regular use of the vehi...

  • Page 19

    Instrument and control functions 3-4 3 to unlock the steering push the key in, and then turn it to “off” while still pushing it. Eau10941 (parking) the steering is locked, and the taillight, license plate light and auxiliary lights are on. The hazard lights and turn sig- nal lights can be turned on,...

  • Page 20

    Instrument and control functions 3-5 3 eau11030 turn signal indicator lights “ ” and “ ” the corresponding indicator light flash- es when the turn signal switch is pushed to the left or right. Eau11060 neutral indicator light “ ” this indicator light comes on when the transmission is in the neutral ...

  • Page 21

    Instrument and control functions 3-6 3 if the warning light does not come on initially when the key is turned to “on”, or if the warning light remains on, have a yamaha dealer check the electrical circuit. Notice eca10021 do not continue to operate the en- gine if it is overheating. Tip ● for radiat...

  • Page 22

    Instrument and control functions 3-7 3 display conditions what to do under 39 °c (under 103 °f) message “lo” is displayed. Ok. Go ahead with riding. 40–116 °c (104–242 °f) coolant temperature is dis- played. Ok. Go ahead with riding. Above 117 °c (above 243 °f) coolant temperature flashes. Warning l...

  • Page 23

    Instrument and control functions 3-8 3 eau11534 engine trouble warning light “ ” this warning light comes on or flashes if a problem is detected in the electrical circuit monitoring the engine. If this oc- curs, have a yamaha dealer check the self-diagnosis system. (see page 3-15 for an explanation ...

  • Page 24

    Instrument and control functions 3-9 3 eau38624 immobilizer system indicator light the electrical circuit of the indicator light can be checked by turning the key to “on”. The indicator light should come on for a few seconds, and then go off. If the indicator light does not come on initially when th...

  • Page 25

    Instrument and control functions 3-10 3 ● a self-diagnosis device ● a display brightness and shift tim- ing indicator light control mode tip ● be sure to turn the key to “on” be- fore using the “select” and “re- set” buttons, except for setting the display brightness and shift timing indicator light...

  • Page 26

    Instrument and control functions 3-11 3 3. Push the “select” button again to reset the stopwatch. Split time measurement 1. Push the “reset” button to start the stopwatch. 2. Push the start switch “ ” or “re- set” button to measure split times. Split times are displayed on the odometer display for f...

  • Page 27

    Instrument and control functions 3-12 3 cancel the currently selected mode, and then repeat step 1 to select the desired mode. ● to reset all the recorded times for the selected split time history, push the “reset” button for at least one second. 4. Push the “select” button for at least one second t...

  • Page 28

    Instrument and control functions 3-13 3 if you do not reset the fuel reserve trip- meter manually, it resets itself automat- ically and the display returns to the prior mode after refueling and traveling 5 km (3 mi). Instantaneous fuel consumption mode the instantaneous fuel consumption display can ...

  • Page 29

    Instrument and control functions 3-14 3 transmission gear display this display shows the selected gear. The neutral position is indicated by “ ” and by the neutral indicator light. Drive mode display this display indicates which drive mode has been selected: “std”, “a” or “b”. For more details on th...

  • Page 30

    Instrument and control functions 3-15 3 tip ● even if the air intake temperature is set to be displayed, the coolant temperature warning light comes on if the engine overheats. ● when the key is turned to “on”, the coolant temperature is auto- matically displayed, even if the air intake temperature ...

  • Page 31

    Instrument and control functions 3-16 3 key and both standard keys to a yamaha dealer and have the stan- dard keys re-registered. Notice eca11590 if the display indicates an error code, the vehicle should be checked as soon as possible in order to avoid engine damage. Display brightness and shift ti...

  • Page 32

    Instrument and control functions 3-17 3 5. Push the “select” button to con- firm the selected brightness level. The control mode changes to the shift timing indicator light activity function. To set the shift timing indicator light ac- tivity function 1. Push the “reset” button to select one of the ...

  • Page 33

    Instrument and control functions 3-18 3 to adjust the shift timing indicator light brightness 1. Push the “reset” button to select the desired indicator light bright- ness level. 2. Push the “select” button to con- firm the selected indicator light brightness level. The display re- turns to the odom...

  • Page 34

    Instrument and control functions 3-19 3 eau12400 dimmer switch “ / ” set this switch to “ ” for the high beam and to “ ” for the low beam. Eau12460 turn signal switch “ / ” to signal a right-hand turn, push this switch to “ ”. To signal a left-hand turn, push this switch to “ ”. When re- leased, the...

  • Page 35

    Instrument and control functions 3-20 3 eau12820 clutch lever the clutch lever is located at the left handlebar grip. To disengage the clutch, pull the lever toward the handle- bar grip. To engage the clutch, release the lever. The lever should be pulled rapidly and released slowly for smooth clutch...

  • Page 36

    Instrument and control functions 3-21 3 be sure to set it by aligning a groove on the adjusting knob with the “ ” mark on the brake lever. Eau12941 brake pedal the brake pedal is on the right side of the motorcycle. To apply the rear brake, press down on the brake pedal. Eau51861 traction control sy...

  • Page 37

    Instrument and control functions 3-22 3 tip ● the traction control may engage when the vehicle travels over a bump. ● the rider may notice slight chang- es in engine and exhaust sounds when the traction control system is engaged. There are six traction control system modes and an off mode. ● “tcs” m...

  • Page 38

    Instrument and control functions 3-23 3 resetting the traction control system may be dis- abled in the following conditions: ● either the front wheel or rear wheel comes off the ground while riding ● excessive rear wheel spinning if the traction control system has been disabled, both the traction co...

  • Page 39

    Instrument and control functions 3-24 3 eau13074 fuel tank cap to open the fuel tank cap open the fuel tank cap lock cover, in- sert the key into the lock, and then turn it 1/4 turn clockwise. The lock will be re- leased and the fuel tank cap can be opened. To close the fuel tank cap 1. Push the fue...

  • Page 40

    Instrument and control functions 3-25 3 3. Wipe up any spilled fuel immedi- ately. Notice: immediately wipe off spilled fuel with a clean, dry, soft cloth, since fuel may deteri- orate painted surfaces or plastic parts. [eca10071] 4. Be sure to securely close the fuel tank cap. Warning ewa15151 gaso...

  • Page 41

    Instrument and control functions 3-26 3 eau51150 fuel tank breather hose and overflow hose before operating the motorcycle: ● check each hose connection. ● check each hose for cracks or damage, and replace if damaged. ● make sure that the end of each hose is not blocked, and clean if necessary. ● ma...

  • Page 42

    Instrument and control functions 3-27 3 eau47271 seats passenger seat to remove the passenger seat 1. Insert the key into the seat lock, and then turn it clockwise. 2. Lift the front of the passenger seat and pull it forward. To install the passenger seat 1. Insert the projection on the rear of the ...

  • Page 43

    Instrument and control functions 3-28 3 2. Install the bolts with the hexagon wrench. 3. Insert the hexagon wrench back into its holder on the passenger seat. 4. Install the passenger seat. Tip make sure that the seats are properly secured before riding. Eau47530 helmet holder the helmet holder is l...

  • Page 44

    Instrument and control functions 3-29 3 eau14463 storage compartment the storage compartment is located under the passenger seat. (see page 3-27.) when storing the owner’s manual or other documents in the storage com- partment, be sure to wrap them in a plastic bag so that they will not get wet. Whe...

  • Page 45

    Instrument and control functions 3-30 3 eau47260 rear view mirrors the rear view mirrors of this vehicle can be folded forward for parking in narrow spaces. Fold the mirrors back to their original position before riding. Warning ewa14371 be sure to fold the rear view mirrors back to their original p...

  • Page 46

    Instrument and control functions 3-31 3 rebound damping force the rebound damping force is adjusted on the right front fork leg only. To in- crease the rebound damping force and thereby harden the rebound damping, turn the adjusting screw in direction (a). To decrease the rebound damping force and t...

  • Page 47

    Instrument and control functions 3-32 3 tip although the total number of clicks of a damping force adjusting mechanism may not exactly match the above spec- ifications due to small differences in production, the actual number of clicks always represents the entire adjusting range. To obtain a precis...

  • Page 48

    Instrument and control functions 3-33 3 compression damping force compression damping force (for fast compression damping) to increase the compression damping force and thereby harden the compres- sion damping, turn the adjusting bolt in direction (a). To decrease the compres- sion damping force and...

  • Page 49

    Instrument and control functions 3-34 3 tip to obtain a precise adjustment, it is ad- visable to check the actual total number of clicks or turns of each damping force adjusting mechanism. This adjustment range may not exactly match the spec- ifications listed due to small differences in production....

  • Page 50

    Instrument and control functions 3-35 3 eau15305 sidestand the sidestand is located on the left side of the frame. Raise the sidestand or lower it with your foot while holding the vehicle upright. Tip the built-in sidestand switch is part of the ignition circuit cut-off system, which cuts the igniti...

  • Page 51

    Instrument and control functions 3-36 3 with the engine turned off: 1. Move the sidestand down. 2. Make sure that the engine stop switch is set to “ 3. Turn the key on. 4. Shift the transmission into the neutral position. 5. Push the start switch. Does the engine start? With the engine still running...

  • Page 52

    For your safety – pre-operation checks 4-1 4 eau15596 inspect your vehicle each time you use it to make sure the vehicle is in safe operating condition. Always follow the inspection and maintenance procedures and schedules described in the owner’s manual. Warning ewa11151 failure to inspect or maint...

  • Page 53

    For your safety – pre-operation checks 4-2 4 rear brake • check operation. • if soft or spongy, have yamaha dealer bleed hydraulic system. • check brake pads for wear. • replace if necessary. • check fluid level in reservoir. • if necessary, add specified brake fluid to specified level. • check hydr...

  • Page 54

    For your safety – pre-operation checks 4-3 4 chassis fasteners • make sure that all nuts, bolts and screws are properly tightened. • tighten if necessary. — instruments, lights, signals and switches • check operation. • correct if necessary. — sidestand switch • check operation of ignition circuit c...

  • Page 55

    Operation and important riding points 5-1 5 eau15951 read the owner’s manual carefully to become familiar with all controls. If there is a control or function you do not understand, ask your yamaha dealer. Warning ewa10271 failure to familiarize yourself with the controls can lead to loss of con- tr...

  • Page 56

    Operation and important riding points 5-2 5 notice eca11833 if a warning or indicator light does not come on initially when the key is turned to “on”, or if a warning or in- dicator light remains on, see page 3-4 for the corresponding warning and indicator light circuit check. 2. Shift the transmiss...

  • Page 57

    Operation and important riding points 5-3 5 eau16810 tips for reducing fuel con- sumption fuel consumption depends largely on your riding style. Consider the following tips to reduce fuel consumption: ● shift up swiftly, and avoid high en- gine speeds during acceleration. ● do not rev the engine whi...

  • Page 58

    Operation and important riding points 5-4 5 eau17213 parking when parking, stop the engine, and then remove the key from the main switch. Warning ewa10311 ● since the engine and exhaust system can become very hot, park in a place where pedestri- ans or children are not likely to touch them and be bu...

  • Page 59

    Periodic maintenance and adjustment 6-1 6 eau17244 periodic inspection, adjustment, and lu- brication will keep your vehicle in the safest and most efficient condition pos- sible. Safety is an obligation of the vehi- cle owner/operator. The most important points of vehicle inspection, adjust- ment, ...

  • Page 60

    Periodic maintenance and adjustment 6-2 6 eau17361 owner’s tool kit the owner’s tool kit is located under the rider seat. (see page 3-27.) the service information included in this manual and the tools provided in the owner’s tool kit are intended to assist you in the performance of preventive mainte...

  • Page 61

    Periodic maintenance and adjustment 6-3 6 eau46861 tip ● the annual checks must be performed every year, except if a kilometer-based maintenance, or for the uk, a mileage-based maintenance, is performed instead. ● from 50000 km (30000 mi), repeat the maintenance intervals starting from 10000 km (600...

  • Page 62

    Periodic maintenance and adjustment 6-4 6 eau1770c general maintenance and lubrication chart no. Item check or maintenance job odometer reading annual check 1000 km (600 mi) 10000 km (6000 mi) 20000 km (12000 mi) 30000 km (18000 mi) 40000 km (24000 mi) 1 * air filter element • replace. √ 2 clutch • ...

  • Page 63

    Periodic maintenance and adjustment 6-5 6 9 * swingarm • check operation and for exces- sive play. √ √ √ √ • lubricate with lithium-soap-based grease. Every 50000 km (30000 mi) 10 drive chain • check chain slack, alignment and condition. • adjust and lubricate chain with a special o-ring chain lubri...

  • Page 64

    Periodic maintenance and adjustment 6-6 6 18 sidestand • check operation. • lubricate with lithium-soap-based grease. √ √ √ √ √ 19 * sidestand switch • check operation. √ √ √ √ √ √ 20 * front fork • check operation and for oil leak- age. √ √ √ √ 21 * shock absorber as- sembly • check operation and s...

  • Page 65

    Periodic maintenance and adjustment 6-7 6 eau18680 tip ● air filter • this model’s air filter is equipped with a disposable oil-coated paper element, which must not be cleaned with com- pressed air to avoid damaging it. • the air filter element needs to be replaced more frequently when riding in unu...

  • Page 66

    Periodic maintenance and adjustment 6-8 6 eau18781 removing and installing cowl- ings the cowlings shown need to be re- moved to perform some of the mainte- nance jobs described in this chapter. Refer to this section each time a cowl- ing needs to be removed and installed. Eau47252 cowlings a and b ...

  • Page 67

    Periodic maintenance and adjustment 6-9 6 to install a cowling 1. Connect the turn signal light lead coupler. 2. Fit the projections on the cowling into the slots as shown. 3. Install the quick fasteners and the quick fastener screws. Eau47243 cowlings c and d to remove a cowling 1. Remove cowling a...

  • Page 68

    Periodic maintenance and adjustment 6-10 6 to install a cowling 1. Insert the projection into the slot, and then slide the cowling back- ward. 2. Place the cowling in its original po- sition, and then install the quick fastener screws. 3. Install cowling a or b. Eau19652 checking the spark plugs the...

  • Page 69

    Periodic maintenance and adjustment 6-11 6 before installing a spark plug, the spark plug gap should be measured with a wire thickness gauge and, if necessary, adjusted to specification. Clean the surface of the spark plug gasket and its mating surface, and then wipe off any grime from the spark plu...

  • Page 70

    Periodic maintenance and adjustment 6-12 6 4. If the engine oil is at or below the minimum level mark, add sufficient oil of the recommended type to raise it to the correct level. To change the engine oil (with or without oil filter cartridge replace- ment) 1. Remove cowlings c and d. (see page 6-8....

  • Page 71

    Periodic maintenance and adjustment 6-13 6 tip make sure that the o-ring is properly seated. 7. Install the new oil filter cartridge with an oil filter wrench, and then tighten it to the specified torque with a torque wrench. 8. Install the engine oil drain bolt and its new gasket, and then tighten ...

  • Page 72

    Periodic maintenance and adjustment 6-14 6 10. Start the engine, and then let it idle for several minutes while checking it for oil leakage. If oil is leaking, im- mediately turn the engine off and check for the cause. Tip after the engine is started, the engine oil level warning light should go off...

  • Page 73

    Periodic maintenance and adjustment 6-15 6 of coolant, replace it with cool- ant as soon as possible, other- wise the cooling system will not be protected against frost and corrosion. If water has been added to the coolant, have a yamaha dealer check the anti- freeze content of the coolant as soon a...

  • Page 74

    Periodic maintenance and adjustment 6-16 6 6. Remove the coolant reservoir cov- er by removing the bolts, and then remove the coolant reservoir cap. 7. Remove the coolant reservoir by removing the bolts, and then turn the reservoir upside down to emp- ty it. 8. After the coolant is completely draine...

  • Page 75

    Periodic maintenance and adjustment 6-17 6 15. Start the engine, and then check the vehicle for coolant leakage. If coolant is leaking, have a yamaha dealer check the cooling system. 16. Install the coolant reservoir cover by installing the bolts. 17. Install the cowlings. Eau36764 air filter elemen...

  • Page 76

    Periodic maintenance and adjustment 6-18 6 eau21384 checking the throttle grip free play the throttle grip free play should mea- sure 3.0–5.0 mm (0.12–0.20 in) at the inner edge of the throttle grip. Periodi- cally check the throttle grip free play and, if necessary, have a yamaha deal- er adjust it...

  • Page 77

    Periodic maintenance and adjustment 6-19 6 warning ewa10511 never overload your vehicle. Opera- tion of an overloaded vehicle could cause an accident. Tire inspection the tires must be checked before each ride. If the center tread depth reaches the specified limit, if the tire has a nail or glass fr...

  • Page 78

    Periodic maintenance and adjustment 6-20 6 tire information this motorcycle is equipped with tube- less tires, tire air valves and cast wheels. Warning ewa10481 ● the front and rear tires should be of the same make and de- sign, otherwise the handling characteristics of the motorcy- cle may be diffe...

  • Page 79

    Periodic maintenance and adjustment 6-21 6 eau21962 cast wheels to maximize the performance, durabil- ity, and safe operation of your vehicle, note the following points regarding the specified wheels. ● the wheel rims should be checked for cracks, bends, warpage or oth- er damage before each ride. I...

  • Page 80

    Periodic maintenance and adjustment 6-22 6 eau37913 checking the brake lever free play there should be no free play at the brake lever end. If there is free play, have a yamaha dealer inspect the brake system. Warning ewa14211 a soft or spongy feeling in the brake lever can indicate the presence of ...

  • Page 81

    Periodic maintenance and adjustment 6-23 6 eau22392 checking the front and rear brake pads the front and rear brake pads must be checked for wear at the intervals spec- ified in the periodic maintenance and lubrication chart. Eau43062 front brake pads the front brake calipers are equipped with two s...

  • Page 82

    Periodic maintenance and adjustment 6-24 6 rear brake warning ewa15990 improper maintenance can result in loss of braking ability. Observe these precautions: ● insufficient brake fluid may al- low air to enter the brake sys- tem, reducing braking performance. ● clean the filler cap before re- moving...

  • Page 83

    Periodic maintenance and adjustment 6-25 6 eau22731 changing the brake fluid have a yamaha dealer change the brake fluid at the intervals specified in the tip after the periodic maintenance and lubrication chart. In addition, have the oil seals of the master cylinders and calipers as well as the bra...

  • Page 84

    Periodic maintenance and adjustment 6-26 6 gine as well as other vital parts of the motorcycle and can lead to chain slippage or breakage. To prevent this from occurring, keep the drive chain slack with- in the specified limits. [eca10571] tip using the alignment marks on each side of the swingarm, ...

  • Page 85

    Periodic maintenance and adjustment 6-27 6 may contain substances that could damage the o-rings. [eca11111] eau23095 checking and lubricating the cables the operation of all control cables and the condition of the cables should be checked before each ride, and the ca- bles and cable ends should be l...

  • Page 86

    Periodic maintenance and adjustment 6-28 6 eau44273 checking and lubricating the brake and shift pedals the operation of the brake and shift pedals should be checked before each ride, and the pedal pivots should be lu- bricated if necessary. Brake pedal shift pedal eau23142 checking and lubricating ...

  • Page 87

    Periodic maintenance and adjustment 6-29 6 eau23202 checking and lubricating the sidestand the operation of the sidestand should be checked before each ride, and the sidestand pivot and metal-to-metal contact surfaces should be lubricated if necessary. Warning ewa10731 if the sidestand does not move...

  • Page 88

    Periodic maintenance and adjustment 6-30 6 eau23272 checking the front fork the condition and operation of the front fork must be checked as follows at the intervals specified in the periodic main- tenance and lubrication chart. To check the condition check the inner tubes for scratches, damage and ...

  • Page 89

    Periodic maintenance and adjustment 6-31 6 eau23291 checking the wheel bearings the front and rear wheel bearings must be checked at the intervals specified in the periodic maintenance and lubrica- tion chart. If there is play in the wheel hub or if the wheel does not turn smoothly, have a yamaha de...

  • Page 90

    Periodic maintenance and adjustment 6-32 6 ● keep this and all batter- ies out of the reach of children. Warning ewa16090 remove the battery cover by remov- ing the bolts and the quick fastener screws before servicing the battery. The cover material can conduct electricity. If the cover has not been...

  • Page 91

    Periodic maintenance and adjustment 6-33 6 eau49823 replacing the fuses the main fuse, the fuel injection system fuse, and the fuse boxes, which contain the fuses for the individual circuits, are located under the rider seat. (see page 3-27.) tip to access the fuel injection system fuse, remove the ...

  • Page 92

    Periodic maintenance and adjustment 6-34 6 3. Turn the key to “on” and turn on the electrical circuit in question to check if the device operates. 4. If the fuse immediately blows again, have a yamaha dealer check the electrical system. Eau39013 replacing a headlight bulb this model is equipped with...

  • Page 93

    Periodic maintenance and adjustment 6-35 6 3. Unhook the headlight bulb holder, and then remove the burnt-out bulb. 4. Place a new headlight bulb into po- sition, and then secure it with the bulb holder. 5. Connect the headlight coupler. 6. Install the headlight bulb cover by turning it clockwise. 7...

  • Page 94

    Periodic maintenance and adjustment 6-36 6 eau24204 replacing a turn signal light bulb 1. Remove the turn signal light lens by removing the screw. 2. Remove the burnt-out bulb by pushing it in and turning it counter- clockwise. 3. Insert a new bulb into the socket, push it in, and then turn it clock...

  • Page 95

    Periodic maintenance and adjustment 6-37 6 3. Remove the burnt-out bulb by pull- ing it out. 4. Insert a new bulb into the socket. 5. Install the socket (together with the bulb) by pushing it in. 6. Install the license plate light unit by installing the screws. Eau44940 auxiliary light this model is...

  • Page 96

    Periodic maintenance and adjustment 6-38 6 a jack either under each side of the frame in front of the rear wheel or under each side of the swingarm. Eau25871 troubleshooting although yamaha motorcycles receive a thorough inspection before shipment from the factory, trouble may occur dur- ing operati...

  • Page 97

    Periodic maintenance and adjustment 6-39 6 eau42503 troubleshooting charts starting problems or poor engine performance check the fuel level in the fuel tank. 1. Fuel there is enough fuel. There is no fuel. Check the compression. Supply fuel. The engine does not start. Check the compression. Operate...

  • Page 98

    Periodic maintenance and adjustment 6-40 6 engine overheating warning ewat1040 ● do not remove the radiator cap when the engine and radiator are hot. Scalding hot fluid and steam may be blown out under pressure, which could cause serious injury. Be sure to wait until the engine has cooled. ● place a...

  • Page 99

    Motorcycle care and storage 7-1 7 eau37833 matte color caution notice eca15192 some models are equipped with matte colored finished parts. Be sure to consult a yamaha dealer for advice on what products to use be- fore cleaning the vehicle. Using a brush, harsh chemical products or cleaning compounds...

  • Page 100

    Motorcycle care and storage 7-2 7 off any detergent residue using plenty of water, as it is harmful to plastic parts. ● do not use any harsh chemical products on plastic parts or the mufflers. Be sure to avoid using cloths or sponges which have been in contact with strong or abrasive cleaning produc...

  • Page 101

    Motorcycle care and storage 7-3 7 ● never use compounds or other special treatments to clean the tita- nium mufflers, as they will remove the finish on the outer surface of the mufflers. ● even the smallest amounts of oil, such as from oily towels or finger- prints, will leave stains on the tita- ni...

  • Page 102

    Motorcycle care and storage 7-4 7 eau26203 storage short-term always store your motorcycle in a cool, dry place and, if necessary, protect it against dust with a porous cover. Be sure the engine and the exhaust sys- tem are cool before covering the motor- cycle. Notice eca10810 ● storing the motorcy...

  • Page 103

    Motorcycle care and storage 7-5 7 tip make any necessary repairs before storing the motorcycle. U1kbe0e0.Book page 5 monday, september 10, 2012 4:43 pm.

  • Page 104

    Specifications 8-1 8 dimensions: overall length: 2070 mm (81.5 in) overall width: 715 mm (28.1 in) overall height: 1130 mm (44.5 in) seat height: 835 mm (32.9 in) wheelbase: 1415 mm (55.7 in) ground clearance: 135 mm (5.31 in) minimum turning radius: 3500 mm (137.8 in) weight: curb weight: 206 kg (4...

  • Page 105

    Specifications 8-2 8 2nd: 2.063 (33/16) 3rd: 1.762 (37/21) 4th: 1.522 (35/23) 5th: 1.364 (30/22) 6th: 1.269 (33/26) chassis: frame type: diamond caster angle: 24.00 ° trail: 102 mm (4.0 in) front tire: type: tubeless size: 120/70 zr17m/c (58w) manufacturer/model: michelin/power pure a manufacturer/m...

  • Page 106

    Specifications 8-3 8 charging system: ac magneto battery: model: ytz10s voltage, capacity: 12 v, 8.6 ah headlight: bulb type: halogen bulb bulb voltage, wattage × quantity: headlight: 12 v, 55 w × 2 tail/brake light: led front turn signal light: 12 v, 10.0 w × 2 rear turn signal light: 12 v, 10.0 w ...

  • Page 107

    Consumer information 9-1 9 eau48612 identification numbers record the vehicle identification num- ber and model label information in the spaces provided below for assistance when ordering spare parts from a yamaha dealer or for reference in case the vehicle is stolen. Vehicle identification number: ...

  • Page 108

    Index a air filter element .................................... 6-17 auxiliary light......................................... 6-37 b battery................................................... 6-31 brake and clutch levers, checking and lubricating ..................... 6-28 brake and shift pedals, ch...

  • Page 109

    Index throttle grip free play, checking ........... 6-18 tires...................................................... 6-18 tool kit .................................................... 6-2 traction control system ........................ 3-21 traction control system indicator/warning light..............

  • Page 110

    A5-yoko_blank.Fm page 1 thursday, december 8, 2011 2:18 pm.

  • Page 111

    A5-yoko_blank.Fm page 1 thursday, december 8, 2011 2:18 pm.

  • Page 112

    Printed in japan 2011.08-0.3 × 2 cr (e) dic183 printed on recycled paper.