Yamaha Add-On Effects Owner's Manual - page 6
6
[Low Freq]/[LO.FREQ.]
Frequency value that serves as the basis for the
Lo Ratio
value. The frequency band below this value is
affected by the
Lo Ratio
parameter setting.
In Studio Manager, drag the icon to change the value.
n
The range is from 22.0Hz through 18.0kHz.
Filter Frequency Response Curve
The curve changes depending on the
HPF
and
LPF
values.
Reverberation images
These images represent the high-range (10kHz), mid-range (1kHz), and low-range (100Hz) reverberation.
These images change shape depending on the parameter values. The vertical axis represents the level; the
horizontal axis represents reverb time; the shape represents the envelope.
Reverb time curve
This curve represents the high-range (10kHz), mid-range (1kHz), and low-range (100Hz) reverb time.
The curve changes depending on the
Reverb Time
,
Hi Ratio
, and
Lo Ratio
parameter values.
3
4
)
!
7
6
5
@
8
9
2
3
4
5
6
7
8
9
)
!
@
@
Studio Manager
Console
7
8
#
$
%
$
$
)
!
@
#
Studio Manager
$
Studio Manager
%
Studio Manager