1. DL manuals
  2. Yamaha
  3. Amplifier
  4. AX-470
  5. Owner's Manual

Yamaha AX-470 Owner's Manual

Other manuals for AX-470: Service Manual, Service Manual
Manual is about: Stereo CD Player

Summary of AX-470

  • Page 1

    1 english important! Please record the serial number of this unit in the space below. Model: serial no.: the serial number is located on the rear of the unit. Retain this owner’s manual in a safe place for future reference. Warning to reduce the risk of fire or electric shock, do not expose this uni...

  • Page 2: Safety Instructions

    2 1 read instructions – all the safety and operating instructions should be read before the unit is operated. 2 retain instructions – the safety and operating instructions should be retained for future reference. 3 heed warnings – all warnings on the unit and in the operating instructions should be ...

  • Page 3: English

    3 english fcc information yamaha and the electronic industries association’s consumer electronics group want you to get the most out of your equipment by playing it at a safe level. One that lets the sound come through loud and clear without annoying blaring or distortion – and, most importantly, wi...

  • Page 4: Connections

    Illustration: ax-570 parts in shaded area ( ) are not present on ax-470. 4 connections ● before attempting to make any connections to or from this unit, be sure to first switch off the power to this unit and to any other components to which connections are being made. ● when making connections betwe...

  • Page 5: English

    5 english connect the speakers terminals to your speakers with wire of the proper gauge, cut as short as possible. If the connections are faulty, no sound will be heard from the speakers. Make sure that the polarity of the speaker wires is correct, that is, + and – markings are observed. If these wi...

  • Page 6: Operations

    6 operations to play a source 1 set to the “ ∞ ” position. 2 3 select a desired input source. * for ax-570 only > if you select turntable as an input source (phono position), refer to “setting the phono switch” on page 9. 4 select the speakers to be used. * if you use two speaker systems, press both...

  • Page 7: English

    7 english notes ● if you want to enjoy another source while recording, select it with the input selector. ● volume, bass, treble, balance, loudness controls and pure direct switch settings have no effect on the material being recorded. To record a source to tape (or dub from a tape to another) 1 sel...

  • Page 8

    8 adjusting the bass and treble controls adjusting the balance control selecting the speaker system adjust the balance of the output volume to the left and right speakers to compensate for sound imbalance caused from speaker location or listening room conditions. Because one or two speaker systems c...

  • Page 9: English

    9 english when you listen with headphones connect the headphones to the phones jack. When listening with headphones privately, set both the speakers a and b switches to the off position. Using the pure direct switch you can enjoy the purest possible sound from your audio sources by setting this swit...

  • Page 10: Remote Control Transmitter

    10 remote control transmitter the remote control transmitter provided with this unit is designed to control all the most commonly used functions of the unit. If the cd player, tuner, turntable, equalizer, and tape deck connected to this unit are yamaha components, then this remote control transmitte...

  • Page 11: English

    11 english notes about the remote control transmitter battery installation battery replacement if you find that the remote control transmitter must be used closer to the main unit, the batteries are weak. Replace both batteries with new ones. Notes ● use only aa, r6, um-3 batteries for replacement. ...

  • Page 12: Troubleshooting

    Symptom the unit fails to turn on when the power switch is pressed. No sound. The sound suddenly goes off. Only one side speaker outputs the sound. There is a lack of bass, and no ambience. Sound “hums”. Sound level is low. Using the bass, treble, balance, loudness controls and subsonic filter switc...

  • Page 13: English

    13 english 13 specifications minimum rms output power per channel (pure direct; on) ax-570 > 8 ohms, 20 hz to 20 khz, 0.015% thd ...............................................100w+100w 6 ohms, 20 hz to 20 khz, 0.03% thd [except scandinavia model] ...............................................120w+...

  • Page 14

    Yamaha electronics corporation, usa 6660 orangethorpe ave., buena park, calif. 90620, u.S.A. Yamaha canada music ltd. 135 milner ave., scarborough, ontario m1s 3r1, canada yamaha electronik europa g.M.B.H. Siemensstr. 22-34, 25462 rellingen bei hamburg, f.R. Of germany yamaha electronique france s.A...