- DL manuals
- Yamaha
- Amplifier
- AX-492, AX-592, AX-892
- Owner's Manual
Yamaha AX-492, AX-592, AX-892 Owner's Manual
Summary of AX-492, AX-592, AX-892
Page 1
Natural sound stereo amplifier amplificateur stéréo de la série “natural sound” thank you for selecting this yamaha stereo amplifier. Nous vous remercions d’avoir porté votre choix sur cet amplificateur stéréo yamaha. Owner’s manual mode d’emploi ax-492/592/892.
Page 2: Safety Instructions
2 1 read instructions – all the safety and operating instructions should be read before the unit is operated. 2 retain instructions – the safety and operating instructions should be retained for future reference. 3 heed warnings – all warnings on the unit and in the operating instructions should be ...
Page 3
3 english 1. Important notice : do not modify this unit! This product, when installed as indicated in the instructions contained in this manual, meets fcc requirements. Modifications not expressly approved by yamaha may void your authority, granted by the fcc, to use the product. 2. Important : when...
Page 4: Contents
Supplied accessories .....................................................4 connections ...................................................................6 controls and their functions ..........................................12 remote control .........................................................
Page 5
English 1. To assure the finest performance, please read this manual carefully and keep it in a safe place for future use. 2. Install this unit in a cool, dry and dust-free area. Do not place it in direct sunlight or near sources of heat (e.G., a stove, etc.). Make sure that it is well ventilated an...
Page 6: Connections
6 connections ● before making any connections to or from this unit, first switch it and any other connected components off. ● properly connect this unit and other components, l (left) to l, r (right) to r, “+” to “+” and “–” to “–”. Also, refer to the owner’s manual of each component which is to be ...
Page 7: Ax-592
7 english caution see instruction manual for connect setting phono cd tuner coupler pre out main in r l l r l mm mc 1 2 tape 1 tape pb tape 2 (md) aux 3 rec out 4 tape pb 3 rec out 4 remote control phono speakers impedance selector ac outlets 100w max. Total switchied a or b : 4 Ω min. /speaker a + ...
Page 8: Ax-892
8 caution see instruction manual for connect setting phono cd tuner pre out main in r l l r l mm mc 1 2 tape 1 tape pb tape 2 (md) aux 3 rec out 4 tape pb 3 rec out 4 gnd remote control phono speakers impedance selector ac outlets switchied 100w max. Total a or b : 4 Ω min. /speaker a + b : 8 Ω min....
Page 9: Connecting Speakers
9 english 9 connect the speakers terminals to your speakers with cable of the proper gauge, cut as short as possible. If the speakers are improperly connected, no sound will be heard. Connect each speaker making sure that the polarity (+ and –) is correct. Red: positive (+) black: negative (–) if th...
Page 10
10 gnd terminal (for turntable use) connecting the ground wire of the turntable to this terminal will normally minimize hum, but in some cases better results may be obtained with the ground wire disconnected. Coupler pre out main in l r mm mc remote control (phono) connector if you have a yamaha tur...
Page 11
11 english warning do not change the impedance selector switch setting while the power to this unit is on, otherwise this unit may be damaged. If this unit fails to turn on when the power switch is pressed the impedance selector switch may not be set to either end closely. If so, set the switch to e...
Page 12: Controls and Their Functions
12 controls and their functions front panel natural sound stereo amplifier ax-492 phones input volume cd direct amp pure direct power speakers a on off b bass 1 2 3 4 – 5 1 2 3 4 5 + 0 loudness 1 2 3 4 5 -30db 10 9 8 7 flat 6 balance 1 2 3 4 l 5 1 2 3 4 5 r 0 treble 1 2 3 4 – 5 1 2 3 4 5 + 0 rec out...
Page 13: Ax-892
13 english 1 remote control sensor receives signals from the remote control. 2 power switch press this switch to turn the power on and off. When the power is on, the indicator will be illuminated. *standby mode while the power is on, pressing the power key on the remote control switches the unit to ...
Page 14: Key Functions
14 the remote control provided with this unit is designed to control all the most commonly used functions of the unit. If the cd player, tuner, turntable and tape deck connected to this unit are yamaha components designed for remote control compatibility, then this remote control will also control t...
Page 15
15 english to open the door to close the door battery installation battery replacement if you find that the remote control must be used closer to the unit, the batteries are weak. Replace both batteries with new ones. Note ● use only aa, r6, um-3 batteries for replacement. ● be sure the polarities a...
Page 16: 1,6
16 playing a source volume -db 16 0 ∞ 2 60 4 40 8 28 12 20 power input phono tuner tape 2 (md) aux tape 1 cd speakers a on off b natural sound stereo amplifier ax-892 phones input volume cd direct amp pure direct speakers a on off b power subsonic filter on off muting on off bass 1 2 3 4 – 5 1 2 3 4...
Page 17: 3,5
17 english recording a source to a tape (or dubbing from tape to tape) rec out selector setting for dubbing tape to tape input volume -db 16 0 ∞ 2 60 4 40 8 28 12 20 phono tuner tape 2 (md) aux tape 1 cd input phono tuner tape 2 (md) aux tape 1 cd to tape from tape deck 1 to tape deck 2. To tape fro...
Page 18
18 adjusting the bass and treble controls adjusting the balance control selecting the speaker system adjusts the balance of the output volume to the left and right speakers to compensate for channel imbalance caused by speaker location or listening room conditions. One or two speaker systems can be ...
Page 19
19 english setting the subsonic filter switch using the pure direct switch you can enjoy the purest possible sound from your sources by setting this switch so that the indicator illuminates. The signals bypass the bass, treble, balance and loudness controls, the subsonic filter switch (ax-592 and ax...
Page 20: Troubleshooting
20 symptom the unit fails to turn on when the power switch is pressed, or turns off suddenly soon after the power is turned on. No sound. Sound level is too low. The sound suddenly goes off. Only one speaker outputs sound. There is a lack of bass and no ambience. The sound “hums”. Sound level is low...
Page 21: Specifications (Ax-492)
21 english specifications (ax-492) audio section minimum rms output power per channel 8 ohms, 20 hz to 20 khz, 0.019% thd ...................................................85w+85w 6 ohms, 20 hz to 20 khz, 0.038% thd ...............................................100w+100w dynamic power per channel ...
Page 22: Specifications (Ax-592)
22 specifications (ax-592) audio section minimum rms output power per channel 8 ohms, 20 hz to 20 khz, 0.015% thd ...............................................100w+100w 6 ohms, 20 hz to 20 khz, 0.03% thd ...............................................120w+120w dynamic power per channel (by ihf dyn...
Page 23: Specifications (Ax-892)
23 english specifications (ax-892) audio section minimum rms output power per channel 8 ohms, 20 hz to 20 khz, 0.015% thd ...............................................115w+115w 6 ohms, 20 hz to 20 khz, 0.03% thd ...............................................140w+140w dynamic power per channel (by...
Page 24
Caracteristiques techniques (ax-892) section audio puissance de sortie minimum rms par canal 8 ohms, 20 hz à 20 khz, 0,015% de dht .............................................115 w+115 w 6 ohms, 20 hz à 20 khz, 0,03% de dht .............................................140 w+140 w puissance dynamiqu...