Yamaha AX-9 Owner's Manual

Manual is about: Yamaha Natural Sound Stereo Integrated Amplifier Owner's Manual

Summary of AX-9

  • Page 1

    Natural sound stereo integrated amplifier préampli/ampli de puissance stéréo de la série “natural sound” natural sound stereo-verstärker natural sound integrerad stereo förstärkare amplificatore integrato stereo a suono naturale amplificador integrado estéreo de sonido natural natural sound geïntegr...

  • Page 2

    2 ● remote control transmitter ● emetteur de télécommande ● fernbedienung ● fjärrkontroll ● telecomando ● transmisor del control remoto ● afstandbediening ● batteries (size aa, r6, um-3) ● piles (taille aa, r6, um-3) ● batterien (größe aa, r6, um-3) ● batterier (storlek aa, r6, um-3) ● batterie (dim...

  • Page 3: Features

    3 english thank you for selecting this yamaha stereo amplifier. ● 50w + 50w (8 Ω ) rms output power, 0.03% thd, 20–20,000 hz ● high dynamic power, low impedance drive capability ● pure direct switch to reproduce the purest source sound ● remote control capability supplied accessories ..................

  • Page 4

    4 1. To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2. Install this unit in a cool, dry, clean place – away from windows, heat sources, sources of excessive vibration, dust, moisture and cold. Avoid sources of humming (transformers,...

  • Page 5

    5 english notes about the remote control transmitter battery installation battery replacement if you find that the remote control transmitter must be used closer to the main unit, the batteries are weak. Replace both batteries with new ones. Notes ● use only aa, r6, um-3 batteries for replacement. ●...

  • Page 6: Connections

    6 connections never plug in this unit and other components until all connections are completed. ● when making connections between this unit and other components, be sure all connections are made correctly, that is to say l (left) to l, r (right) to r, “+” to “+” and “–” to “–”. Also, refer to the ow...

  • Page 7

    7 english connect the speakers terminals to your speakers with wire of the proper gauge, cut as short as possible. If the connections are faulty, no sound will be heard from the speakers. Make sure that the polarity of the speaker wires is correct, that is, + and – markings are observed. If these wi...

  • Page 8: Controls and Their Functions

    8 controls and their functions front panel 1 power indicator lights up while the power to this unit is on. 2 standby/on switch press this switch to turn the power to this unit on. Press it again to turn this unit into the standby mode. Standby mode in this state, this unit consumes a very small quan...

  • Page 9

    9 english for control of this unit 1 sleep timer key this unit is automatically turned into the standby mode one hour after this key is pressed (so that sleep indicator lights up). 2 power key turns the power to this unit on and turns this unit into the standby mode alternately. 3 input selector key...

  • Page 10: Operations

    10 1 set to the “0” position. 2 turn the power on. 3 select a desired input source. The indicator of the selected source lights up. 4 select the speakers to be used. * if you use two speaker systems, press both the a and b switches. 5 play the source. 6 adjust to the desired output level. 7 if desir...

  • Page 11

    11 english to record a source to tape (or md) when you listen with headphones connect the headphones to the phones jack. When listening with headphones privately, set both the speakers a and b switches to the off position. Phones standby/on sleep tape monitor pure direct phones speakers on off a b o...

  • Page 12

    12 adjusting the bass and treble controls adjusting the balance control selecting the speaker system adjust the balance of the output volume to the left and right speakers to compensate for sound imbalance caused from speaker location or listening room conditions. Because one or two speaker systems ...

  • Page 13: Troubleshooting

    13 english if the unit fails to operate normally, check the following points to determine whether the fault can be corrected by the simple measures suggested. If it cannot be corrected, or if the fault is not listed in the symptom column, disconnect the power cord and contact your authorized yamaha ...

  • Page 14: Specifications

    14 specifications minimum rms output power per channel 8 ohms, 20 hz to 20 khz, 0.03% thd .......................50w+50w dynamic power per channel (by ihf dynamic headroom measuring method) 8/6/4/2 ohms.................................................78/88/100/112w din standard output power per chan...

  • Page 15

    Yamaha electronics corporation, usa 6660 orangethorpe ave., buena park, calif. 90620, u.S.A. Yamaha canada music ltd. 135 milner ave., scarborough, ontario m1s 3r1, canada yamaha electronik europa g.M.B.H. Siemensstr. 22-34, 25462 rellingen bei hamburg, f.R. Of germany yamaha electronique france s.A...