Natural sound stereo integrated amplifier préampli/ampli de puissance stéréo de la série “natural sound” natural sound stereo-verstärker natural sound integrerad stereo förstärkare amplificatore integrato stereo a suono naturale amplificador integrado estéreo de sonido natural natural sound geïntegr...
● remote control transmitter ● emetteur de télécommande ● fernbedienungsgeber ● fjärrkontrollsändare ● trasmittente del telecomando ● transmisor del control remoto ● afstandbediening ● batteries (size aa, r6, um-3) ● piles (taille aa, r6, um-3) ● batterien (größ aa, r6, um-3) ● batterier (storlek aa...
1. To assure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2. Install this unit in a cool, dry, clean place – away from windows, heat sources, sources of excessive vibration, dust, moisture and cold. Avoid sources of humming (transformers, m...
4 connections • before attempting to make any connections to or from this unit, be sure to first switch off the power to this unit and to any other components to which connections are being made. • when making connections between this unit and other components, be sure all connections are made corre...
5 english connect the speakers terminals to your speakers with wire of the proper gauge, cut to be as short as possible. If the connections are faulty, no sound will be heard from the speakers. Make sure that the polarity of the speaker wires is correct, that is, + and – markings are observed. If th...
5 play the source. 7 if desired, adjust the bass, treble, balance and loudness controls, etc. (refer to page 8.) 6 adjust to the desired output level. 6 operations note in the step 3, if two or more program sources are selected at the same time (by using input selectors), be sure to remember the pri...
Tape deck (or vcr) connected to the vcr/tape 2 terminals tape deck connected to the tape 1 terminals 7 english notes ● volume, bass, treble, balance and loudness control settings have no effect on the material being recorded. ● to dub from tape to tape, only the following one way of dubbing can be p...
8 using the source direct switch you can enjoy the purest possible sound from your audio sources by setting this switch on. By doing so, the audio signal bypasses the bass, treble, balance and loudness controls, eliminating any alterations to the audio signal. When you listen with headphones connect...
9 english remote control transmitter the remote control transmitter provided with this unit is designed to control all the most commonly used functions of the unit. If the cd player, tuner, turntable, equalizer, and tape deck connected to this unit are yamaha components designed for remote control c...
10 notes about the remote control transmitter battery installation battery replacement if you find that the remote control transmitter must be used closer to the main unit, the batteries are weak. Replace both batteries with new ones. Notes ● use only aa, r6, um-3 batteries for replacement. ● be sur...
Symptom the unit fails to turn on when the power switch is pressed. No sound or no picture. The sound suddenly goes off. Only one side speaker outputs the sound. Sound “hums”. The volume level is low while playing a record. The remote control transmitter does not work. The distance or range within w...
12 specifications minimum rms output power per channel 8 ohms, 20 hz to 20 khz, 0.04% thd ..............................................55w+55w 6 ohms, 20 hz to 20 khz, 0.06% thd [scandinavia and general models] ..............................................60w+60w 4 ohms, 20 hz to 20 khz, 0.1% thd ...
Yamaha electronics corporation, usa 6660 orangethorpe ave., buena park, calif. 90620, u.S.A. Yamaha canada music ltd. 135 milner ave., scarborough, ontario m1s 3r1, canada yamaha electronik europa g.M.B.H. Siemensstr. 22-34, d-2084 rellingen bei hamburg, f.R. Of germany yamaha electronique france s....
