Yamaha BIG BEAR 400 Owner's Manual - Auxiliary Dc Jack

4-23

4

WARNING

EWB00350

EBU19180

Auxiliary DC jack 

The auxiliary DC jack is located at the front right

side of the ATV. The auxiliary DC jack can be used

for suitable work lights, radios, etc. The auxiliary

DC jack should only be used when the engine is

running.

1. Set the light switch to “OFF”.

2. Start the engine. (See page 6-1.)

3. Open the auxiliary DC jack cap, and then in-

sert the accessory power plug into the jack.

4. When the auxiliary DC jack is not being used,

cover it with the cap.

CAUTION:

ECB00120

●

Do not use accessories requiring more than

the above maximum capacity. This may

overload the circuit and cause the fuse to

blow.

POTENTIAL HAZARD

Improper shock absorber assembly adjust-

ment.

WHAT CAN HAPPEN

Uneven adjustment can cause poor handling

and loss of stability, which could lead to an

accident.

HOW TO AVOID THE HAZARD

Always adjust the shock absorber assem-

blies on the left and right side to the same

setting.

1. Auxiliary DC jack

2. Auxiliary DC jack cap

Maximum rated capacity for the auxiliary DC 

jack:

DC 12 V, 120 W (10 A)

U4S110E0.book  Page 23  Friday, August 4, 2006  4:03 PM