Yamaha BRUIN YFM35BAV Owner's Manual - page 85

7-22

TURNING YOUR ATV 

To achieve maximum traction while riding off-

road, the two rear wheels are mounted solidly

on one axle and turn together at the same

speed. Therefore, unless the wheel on the in-

side of the turn is allowed to slip or lose some

traction, the ATV will resist turning. A special

turning technique must be used to allow the

ATV to make turns quickly and easily. It is es-

sential that this skill be learned first at low

speed.

As you approach a curve, slow down and be-

gin to turn the handlebars in the desired direc-

tion. As you do so, put your weight on the

footboard to the outside of the turn (opposite

your desired direction) and lean your upper

body into the turn. Use the throttle to maintain

an even speed through the turn. This maneu-

ver will let the wheel on the inside of the turn

slip slightly, allowing the ATV to make the turn

properly.

WARNING

POTENTIAL HAZARD 

Turning improperly. 

WHAT CAN HAPPEN 

ATV could go out of control, causing a

collision or overturn. 

HOW TO AVOID THE HAZARD 

Always follow proper procedures for

turning as described in this Owner’s

Manual. 

Practice turning at low speeds before at-

tempting to turn at faster speeds. Do not

turn at speeds too fast for your skills or

the conditions.

EE.book  Page 22  Thursday, March 31, 2005  9:16 AM