- DL manuals
- Yamaha
- Stereo System
- CC-70W
- Owner's Manual
Yamaha CC-70W Owner's Manual - Cd Playback
15
CD playback
1
Press the CD input selector button.
2
Press the OPEN/CLOSE button to open the disc table.
3
Place discs on the trays, label side up.
*
Up to three discs can be loaded on the trays.
*
8 cm (3”) discs may be played without an adaptor.
4
Press the OPEN/CLOSE button to close the disc table.
*
The total number of tracks and the total playing time of
the disc being selected will be displayed for several
seconds.
*
The music calendar will be displayed only for the
number of tracks on the disc being selected.
*
If the compact disc contains more than 20 tracks, the
“OVER” indicator will light up on the music calendar.
5
If necessary, select another disc by pressing the DISC
SKIP button on the remote control transmitter once or
more (so that the corresponding disc tray number is
located on top of the disc indicator).
6
Press the play/pause button to start playback from track 1.
*
The “
” indicator will appear and playback will begin.
As the playback of each track on the music calendar is
finished, that track number will go out.
For easier operation
Pressing the disc select button (1, 2 or 3) will select the disc
directly, and playback will begin from track 1 automatically.
To interrupt playback
1
1
Press the play/pause button.
*
The “
” indicator will flash.
2
2
Press the play/pause button to resume playback from the
same point.
To stop playback
Press the stop
button.
To switch the unit off after use
Turn the unit off by pressing the POWER switch. (The
indicators will go off except for the current time display.)
COMPACT DISC PLAYER OPERATION
-
+
1
2
3
4
5
1
2
3
4
5
6
7
8
6
7
8
9
0
A
B
C
D
E
TIME
PROG
TAPE
EDIT
+
I0
SEARCH
SKIP
STOP
PLAY/PAUSE
DISC SKIP
RANDOM
REPEAT
CD
TUNER
TAPE
PRESET
A/B/C/D/E
DOWN
UP
PLAY
STOP
PLAY
REC/PAUSE
SLEEP
POWER
DISPLAY
VOLUME
DECK
PHONO/AUX
TUNER DIRECT
A/B
POWER
POWER
Total number of tracks
The disc on the tray located on top of this
indicator is now being selected.
Music calendar Total playing time
Disc select buttons
Receiver
CD Player
1
2, 4
1
5
3
6,
1
1
,
2
2
6,
1
1
,
2
2
1
2
3
4
5
6
7
8
9
10
11
12
TRACK
TOTAL
Summary of CC-70W
Page 1
Active servo technology cc-70w is composed of rx-s70, cdc-s90, kxw-s70 and nx-s70. Cc-70s is composed of rx-s70, cdc-s90, kx-s90 and nx-s70. * for u.K. And europe models, nx-s70 is optional in some areas. Natural sound mini component system cc-70w / cc-70s owner’s manual page safety instructions.......
Page 2: Safety Instructions
1 read instructions – all the safety and operating instructions should be read before the unit is operated. 2 retain instructions – the safety and operating instructions should be retained for future reference. 3 heed warnings – all warnings on the unit and in the operating instructions should be ad...
Page 3
1. Important notice : do not modify this unit! This product, when installed as indicated in the instructions contained in this manual, meets fcc requirements. Modifications not expressly approved by yamaha may void your authority, granted by the fcc, to use the product. 2. Important : when connectin...
Page 4
Remote control transmitter am (mw/lw) loop antenna indoor fm antenna batteries (size aa, um/sum-3, r6, hp-7) speaker cords (for nx-s70) precautions: read this before operating your unit 2 after unpacking, check that the following parts are contained. Introduction features supplied accessories thank ...
Page 5
Precautions: read this before operating your unit ■ grounding or polarization – precautions should be taken so that the grounding or polarization of an appliance is not defeated. ■ do not use force on switches, controls or connection wires. When moving the unit, first disconnect the power plug and t...
Page 6
4 names of controls, indicators and rear panel parts cd player (cdc-s90) 1. Disc table 2. Stop button: 3. Play/pause button: / 4. Disc select buttons 5. Time button 6. Edit button 7. Repeat button 8. Random play button 9. Skip buttons: / (search buttons: / ) 10. Playxchange button 11. Open/close but...
Page 7
5 names of controls, indicators and rear panel parts double cassette tape deck (kxw-s70) 48. Deck a cassette compartment 49. Deck a select button and indicator 50. Deck b select button and indicator 51. Deck b cassette compartment 52. Stop button: 53. Play direction indicator 54. Deck a eject button...
Page 8
6 names of controls, indicators and rear panel parts frequency step switch (general model only) because the interstation frequency spacing differs in different areas, set the frequency step switch (located at the rear) according to the frequency spacing in your area. Before setting this switch, disc...
Page 9: Names of Control Buttons
7 names of control buttons ■ receiver control buttons 1. Remote control transmitter window 2. Preset station number buttons 3. A, b, c, d, e selector buttons 4. Preset down/up buttons 5. A/b/c/d/e button 6. Power switch 7. Sleep button 8. Display button 9. Volume down (–)/up (+) buttons 10. Input se...
Page 10: Remote Control Transmitter
8 ■ tape deck control buttons 22. Play button: 23. Stop button: 24. Play button: 25. Fast wind button: 26. Deck a/b select buttons (for kxw-s70 only) 27. Fast wind button: 28. Rec/pause button: loading the batteries for the remote control transmitter 1 remove the battery compartment cover. (press th...
Page 11: Transmitter
9 30° 30° remote control sensor 0.2 m – 6 m (8” – 20’) proper use of the remote control transmitter aim (within the range of 60° with no obstacles) the remote control transmitter at the remote control sensor and operate as shown. Notes concerning use • replace the batteries if control distance decre...
Page 12: Placing The System
10 placing the system this system can be placed any way you like, however, be sure not to place another unit or any object on top of the receiver to prevent the ventilation holes on the top panel of the receiver from being obstructed. If doing so, the receiver may be damaged. Notes • if the system i...
Page 13: Speaker Connection
11 speaker connection connect each speaker wire to the speakers terminals. Cautions • do not let the bare speaker wires touch each other as this could damage the receiver and/or speakers. • when connecting the speakers to the unit, be sure to connect the speaker wires properly. Do not mistake the ri...
Page 14
12 open/close the control door when it is not necessary to operate controls inside the control door, close the door. To open or close the door, press the right edge until it clicks. Standby mode while the power is on, pressing the power switch (or the power switch on the remote control transmitter) ...
Page 15
13 1 while the power is on, press the display button to display the time. If the power is off, you can proceed to the next step. 2 while pressing the time adjust button, press the hour button and set the hour. * press the hour button once to advance the time by 1 hour. Press and hold to advance cont...
Page 16: Volume
14 compact disc player operation volume 0 i0 - + volume sound control volume front panel operation rotate the volume control towards 10 to increase the volume, and towards 0 to decrease the volume. Remote control operation press the volume + button to increase the volume and the volume – button to d...
Page 17: Cd Playback
15 cd playback 1 press the cd input selector button. 2 press the open/close button to open the disc table. 3 place discs on the trays, label side up. * up to three discs can be loaded on the trays. * 8 cm (3”) discs may be played without an adaptor. 4 press the open/close button to close the disc ta...
Page 18: Direct-Selection Play
16 - + a b c d time prog tape edit search skip stop play/pause disc skip random repeat cd tuner tape preset a/b/c/d/e down up play stop play rec/pause sleep power display volume deck phono/aux a/b 1 2 3 4 5 1 2 3 4 5 6 7 8 6 7 8 9 0 e + i0 tuner direct 1 2 3 4 5 1 2 3 4 5 6 7 8 6 7 8 9 0 e + i0 tune...
Page 19: Skip Search
17 compact disc player operation - + 1 2 3 4 5 1 2 3 4 5 6 7 8 6 7 8 9 0 a b c d e time prog tape edit + i0 search skip stop play/pause disc skip random repeat cd tuner tape preset a/b/c/d/e down up play stop play rec/pause sleep power display volume deck phono/aux tuner direct a/b “skip search” and...
Page 20: Program Play
18 compact disc player operation program play you can program up to 20 tracks in any desired order. 1 load discs and close the disc table. 2 when in the stop mode, press the program button to prepare for programming. * “prog” and “p-01” illuminate on the display, and all track numbers on the selecte...
Page 21
To stop program play • press the stop button. The first track number programmed will be displayed. • to resume playback, press the play/pause / button. Playback will begin from the beginning of the program. To cancel a programmed sequence there are several methods as described below. • press the sto...
Page 22: Repeat Play
20 repeat play all discs, an entire disc, a single track or a programmed sequence can be continuously repeated. 1 while watching the display, press the repeat button once or more to select a desired repeat play mode (s rep, f rep or a rep). 2 press the play/pause button. Repeat play modes single rep...
Page 23: Random Play
21 random play the tracks on the selected disc can be played back in a random order. 1 load discs and close the disc table. 2 select a desired disc by pressing the disc skip button. 3 press the random button to begin random play. * the “random” indicator will light up. To cancel the random play pres...
Page 24: Automatic Tuning
22 normally, if station signals are strong and there is no interference, quick automatic-search tuning (automatic tuning) is possible. However, if signals of the station you want to select are weak, you must tune to it manually (manual tuning). Automatic tuning 1 press the tuner input selector butto...
Page 25: Preset Tuning
23 tuning operation preset tuning this unit can store station frequencies selected by tuning operation. With this function, you can select any desired station by only calling the corresponding preset station number. Up to 40 stations (8 stations x 5 areas) can be stored. To store stations (example: ...
Page 26: Automatic Preset Tuning
24 automatic preset tuning you can also make use of an automatic preset tuning function. By this function, this unit performs automatic tuning and stores stations with strong signals sequentially. Up to 40 stations are stored automatically in the same way as in the manual preset tuning method on the...
Page 27: General Information
25 25 detection hole tab tape deck operation (for kxw-s70 double cassette deck) general information • do not use c-120 tapes, tapes with internal reels or poor- quality tapes, since they can cause malfunctions. • before loading a tape into the cassette compartment, tighten the slack tape with a pen ...
Page 28: Tape A Or Tape B Playback
Tape a or tape b playback 1 press the tape input selector button. 2 open the deck a or deck b cassette compartment by pressing the eject button. 3 load the tape into the deck a or deck b cassette compartment, and close the lid panel completely by pressing the upper part of the center of the panel as...
Page 29: Winding The Tape
Winding the tape 1 if during playback, first press the stop button. 2 next press the fast wind or fast wind button to wind the tape. 3 press the stop button to stop. * while winding the tape, the corresponding play direction indicator flashes rapidly. Note when the tape is wound to the end, this uni...
Page 30: Continuous Playback
28 continuous playback 1 load the tapes into the deck a and deck b cassette compartments. 2 set the reverse mode switch to . The reverse mode switch can be operated before or during playback, and changes tape playback as follows: 3 press the deck a or b select button to select the tape to be played ...
Page 31: General Information
General information • do not use c-120 tapes, tapes with internal reels or poor- quality tapes, since they can cause malfunctions. • before loading a tape into the cassette compartment, tighten the slack tape with a pen or pencil. • tapes have removable tabs which prevent accidental recording or era...
Page 32
30 dolby b and c type noise reduction with cassette tapes, the most noticeable form of noise is high frequency hiss. To reduce this hiss noise, this unit has been equipped with a newly developed dolby c noise reduction system in addition to its conventional dolby b nr. Either type of noise reduction...
Page 33: Winding The Tape
31 tape deck operation (for kx-s90 single cassette deck) winding the tape 1 if during playback, first press the stop button. 2 next press the fast wind or fast wind button to wind the tape. 3 press the stop button to stop. * while winding the tape, the corresponding play direction indicator flashes ...
Page 34: Cd Synchronized Recording
32 • when recording important selections, be sure to make a preliminary test to ensure that the desired source material is being properly recorded with good sound quality. • the automatic recording level control circuit automatically controls the level of the input signal used for recording. • adjus...
Page 35
33 to stop recording temporarily 1 press the stop button of the cd player. 2 choose the selection to be recorded next by using the skip or button, and then press the play button of the cd player to resume recording (or simply press the track number input button on the remote control transmitter). To...
Page 36: A Tape Automatically
34 recording cd(s) on both sides of a tape automatically 1 press the cd input selector button and load the disc to be recorded. 2 select the disc by pressing the disc skip button. 3 load a tape into the cassette compartment. 4 when recording with the dolby nr system, set the dolby nr switch to b or ...
Page 37: Automatic Tape-Editing
35 automatic tape-editing this convenient feature can be used to program tracks on a disc (or discs) for recording to tape. By only memorizing the tape’s total possible recording time, the unit will automatically program tracks or help you to program tracks so they will fit onto the tape with the le...
Page 38
36 recording compact discs notes • if the tape’s total possible recording time is longer than the total playing time of the selected disc, tracks on another disc are recorded automatically. In this case, as many as three discs can be recorded continuously. • if programs are made selecting tracks fro...
Page 39
37 recording compact discs to record programmed tracks from one or more discs 1 press the cd input select button and load a disc (or discs) on the disc table. 2 follow steps 3–6 on page 35. 3 press the program button. * “prog” and “p-01” illuminate on the display, and all track numbers on the select...
Page 40: 4 3
38 recording from the built-in tuner 1 press the tuner input selector button. 2 tune to the desired station. (refer to the “tuning operation” on pages 22 and 23.) 3 load a tape into the cassette compartment. 4 when recording with the dolby nr system, set the dolby nr switch to b or c; if not, set it...
Page 41: Erasing Recorded Tapes
Dubbing (by using kxw-s70 only) • during dubbing, adjusting the volume, balance, treble and bass controls have no effect on the recorded sound. • try to use the same tape formula and length for the recording tape as for the master tape. 1 press the tape input selector button. 2 load a prerecorded ta...
Page 42: Timer Play
40 how to use the built-in timer timer play by using the built-in timer, you can set the time when the unit turns on and a source begins playing automatically, and the time when the unit turns off automatically. 1 prepare the source to be played. For tuner: tune in to the station you will listen to....
Page 43
41 ➂ at on time/time setting mode [“on time” appears on the display, and soon it is changed to a time setting mode.] set to the time when the timer play begins by using the hour button and the minute button. ➃ at off time/time setting mode [“off time” appears on the display, and soon it is changed t...
Page 44: Timer Recording
42 timer recording (to record a tuner program) 1 load a blank tape into the cassette compartment. (for kxw-s70, load a tape into the deck b cassette compartment.) 2 tune to the station of which program you want to record. 3 follow step 2 of the “timer play” on pages 40 and 41. * however, in step 2- ...
Page 45: Sleep Timer Operation
43 how to use the built-in timer sleep timer operation this unit can be turned off automatically. 1 play the desired sound source. 2 press the sleep button. “sleep” appears on the display, and soon it is replaced by “120”. 3 press the sleep button repeatedly until the desired sleep time appears in t...
Page 46: Auxiliary (Aux)
44 auxiliary (aux) 1 connect the output lead of a video cassette player, video disc player, etc. To the aux inputs of this unit. (red → right channel, white → left channel) 2 press the aux input selector button. 3 operate the unit connected to the aux inputs. 4 start recording with this unit, if so ...
Page 47: Headphones
45 headphones • be sure that your headphones have a 3.5 mm (1/8”) diameter plug and are between 16 ohms and 50 ohms impedance. Recommended impedance is 32 ohms. • when headphones are connected, the speakers are defeated automatically. Adjust the volume control for desired volume. Internal care • dir...
Page 48
46 specifications as a part of policy of continuous improvement, yamaha reserves the right to make design and specification changes for product improvement without prior notice. The performance specification figures indicated are nominal values of production units. ■ receiver (rx-s70) minimum rms ou...
Page 49
47 cause ac supply lead is not plugged in. Loose speaker connections. Internal protection circuit is functioning. Interference from starting motor of nearby car. Interference from thermostat of nearby electrical appliance. Antenna input is too weak due to obstructions or excessive distance from broa...
Page 50
48 active servo technology (for speaker system nx-s70 only) port cabinet high- amplitude bass sound signals of low amplitude negative-impedance output drive active servo processing amplifier air woofer (helmholtz resonator) signals the theory of the active servo technology is based upon two major fa...
Page 51
Yamaha electronics corporation, usa 6660 orangethorpe ave., buena park, calif. 90620, u.S.A. Yamaha canada music ltd. 135 milner ave., scarborough, ontario m1s 3r1, canada yamaha electronik europa g.M.B.H. Siemensstr. 22-34, d-2084 rellingen bei hamburg, f.R. Of germany yamaha electronique france s....